Commit Graph

53 Commits

Author SHA1 Message Date
onoe
9ce8f42312 Use IFF_ALLMULTI instead of if_amcount to decide if all multicast should
be received.  Pointed out by Luigi Rizzo.
2004-04-18 01:05:02 +00:00
mdodd
2ff0565c54 Don't announce MAC addresses twice.
(ieee80211_ifattach() calls ether_ifattach().)
2004-03-20 19:57:47 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
onoe
da242ceb23 Correct beacon (src/bssid) for hostap and adhoc mode. 2004-01-15 13:30:06 +00:00
onoe
cebefd568c Use generic net80211 framework for awi driver.
Restore awi to be workable again; it was broken..
XXX: The initialization is still unreliable yet, it sometimes fails on
     some card.
2004-01-15 10:04:21 +00:00
brooks
f1e94c6f29 Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
brooks
f4e26f09ce ifp->if_name can't be null when we just assigned a static string to it. 2003-10-30 23:05:31 +00:00
phk
70376abeea Fix off-by-one error in array bounds check. 2003-09-05 11:09:26 +00:00
obrien
c63dab466c Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
sam
83c82ef638 update for new 802.11 support 2003-06-28 06:17:26 +00:00
obrien
43cb95182e Explicitly declare 'int' parameters. 2003-04-21 16:27:46 +00:00
imp
0b41fd998b Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
ru
f9d8fd05d7 Added missing dependency on rc4.
Reviewed by:	imp
2003-03-21 22:02:58 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
sam
b16cb0a948 Correct mbuf packet header propagation. Previously, packet headers
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a  "copy" operation.  This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain.  This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.

These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block.  This
introduces an incompatibility with openbsd which we may want to revisit.

Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them.  We may want to support this;
for now we watch for it with an assert.

Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.

Supported by:	Vernier Networks
Reviewed by:	Robert Watson <rwatson@FreeBSD.org>
2002-12-30 20:22:40 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
jhb
fd412ae82b Repeat after me: sizeof(int) != sizeof(void *). 2002-11-06 20:04:41 +00:00
phk
ab5fdb04d4 Remove empty #if*/#endif clauses. 2002-09-21 08:44:51 +00:00
imp
cf0d37c01c Use __FreeBSD_version to test what things to use 2002-05-31 03:27:34 +00:00
imp
3e109d2cd3 Make this build on 4.x machines again (building a -current kernel on a
-stable machine via the old-school methods):

Use __FreeBSD_version in preference to __FreeBSD__ >= N where possible.
Define a single variable mythread which is set to curproc or curthread
depending on the OS version (with a comment saying it is a white lie on
4.x since it really is a proc).

NB: __FreeBSD__ is the OS level of the host machine, not the target,
and should never be used, if possible, as __FreeBSD__ >= N.
2002-04-19 22:28:09 +00:00
jhb
dc2e474f79 Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
alfred
3264aec746 Remove __P. 2002-03-20 02:08:01 +00:00
brooks
a2dc9de4b4 Set ifp->if_name to "awi" instead of device_get_name(dev) to avoid
casting away a const qualifier so the awi driver compiles.
2002-02-26 20:09:19 +00:00
imp
24ee2193e0 Add NEWCARD support to awi.
Devices obtained from NetBSD (+ zoom air 4000, which I added).
2001-11-19 06:42:11 +00:00
julian
5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
onoe
d3cf90f482 The information about how to integrate this driver into BSDs is obsoleted,
and no longer needed.
2001-06-26 13:15:14 +00:00
onoe
ab4f0f1d6b Fix capability information in association request to reflect ESS/IBSS mode.
This fix is required to interoperate with Cisco's access point.
Obtained from:	NetBSD current
2001-06-26 13:10:30 +00:00
onoe
67840ab392 Fix keyid bit position of encrypted packet to make non-first key usable.
Obtained from:	NetBSD current
2001-06-26 13:08:44 +00:00
onoe
c1aa1040ff Fix previous enhancement to add support for new ifconfig interface. 2001-06-26 13:06:12 +00:00
phk
1aacce7a45 Currently, each wireless networking driver has it's own control program
despite the fact that most people want to set exactly the same settings
regardless of which card they have.  It has been repeatidly suggested
that this configuration should be done via ifconfig.  This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers.  It also provides partial, untested support for the
awi driver.

PR:		25577
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-26 09:27:08 +00:00
phk
d214ae2171 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
phk
709379c1ae Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
wollman
cab9efa1c5 Note new location of if_wavelan_ieee.h. 2001-01-09 04:23:05 +00:00
jlemon
954e1d2ccd Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
phk
ff5cdfae2d Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
onoe
b06428d52e awi needs to access memory with 8bit,
but pccardd apparently maps memory with MDF_16BITS flag.
So memory mapped access is disabled and use IO port instead for now.

This fixes the problem for config index 0x01 in the pccard.conf
with the message: "awi0: failed to complete selftest (timeout)"
2000-10-10 09:50:25 +00:00
phk
5b79681c70 Bite the bullet and provde memcmp() and memset(), this will be cheaper
than all the copy&paste versions we already have :-(
2000-09-02 13:34:52 +00:00
onoe
387cc6f0df awictl configuration interface is never used and now it is replaced by
wicontrol(8).
2000-08-14 14:10:10 +00:00
onoe
258831b31a Add support for WEP functionality.
Add support for wi(4) compatible configuration interface.  It enables
wicontrol(8) to configure some 802.11 specific parameters.
Some minor fixes from NetBSD.
Obtained from:  NetBSD current
2000-08-14 13:42:38 +00:00
onoe
cf64f2aaf7 This file contains a shim just for NetBSD, and not used in FreeBSD at all. 2000-08-14 05:44:35 +00:00
sheldonh
230f54e2d8 Remove the awi(4) manual page from the sys/ hierarchy after a repo-
copy to share/man/man4 .  The file is still not connected to the
build from that directory either.
2000-07-23 09:40:39 +00:00
archie
7357df6b48 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
peter
39677f9f7f We always provide the bpf hooks. Remove #include "bpf.h"/NBPF. 2000-06-10 07:16:14 +00:00
guido
66eb05ff87 Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
2000-05-29 19:58:10 +00:00
jake
961b97d434 Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
jake
d93fbc9916 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
nyan
5deb83e3ab Use the rman_get_bustag() and rman_get_bushandle() functions. 2000-05-19 16:19:51 +00:00
archie
fa21035b4e Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00