It may only be used with WITH_AUTO_OBJ, which the WITH_DIRDEPS_BUILD does. We
could support this in the normal build as well if we forced creating the directory
and setting .OBJDIR.
Sponsored by: EMC / Isilon Storage Division
The intention was to just limit leading zeroes on numeric names. That
check is now improved to also catch the leading spaces and '+' that
strtoul can pass through.
PR: 204897
MFC after: 3 days
(1) The pmap argument passed to the function must be current pmap only.
(2) The process must be single threaded as the function is called either
when a process is exiting or from exec_new_vmspace().
Remove pmap_tlb_flush_ng() which is not used anywhere now.
Approved by: kib (mentor)
When using lagg failover mode neither Gratuitous ARP (IPv4) or Unsolicited
Neighbour Advertisements (IPv6) are sent to notify other nodes that the
address may have moved.
This results is slow failover, dropped packets and network outages for the
lagg interface when the primary link goes down.
We now use the new if_link_state_change_cond with the force param set to
allow lagg to force through link state changes and hence fire a
ifnet_link_event which are now monitored by rip and nd6.
Upon receiving these events each protocol trigger the relevant
notifications:
* inet4 => Gratuitous ARP
* inet6 => Unsolicited Neighbour Announce
This also fixes the carp IPv6 NA's that stopped working after r251584 which
added the ipv6_route__llma route.
The new behavour can be controlled using the sysctls:
* net.link.ether.inet.arp_on_link
* net.inet6.icmp6.nd6_on_link
Also removed unused param from lagg_port_state and added descriptions for the
sysctls while here.
PR: 156226
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4111
in pmap_remove_pages().
Some points were considered:
(1) There is no range TLB flush cp15 function.
(2) There is no target selection for hardware TLB flush broadcasting.
(3) Some memory ranges could be mapped sparsely.
(4) Some memory ranges could be quite large.
Tested by buildworld on RPi2 and Jetson TK1, i.e. 4 core platforms.
It turned out that the buildworld time is faster. On the other hand,
when the postponed TLB flush was also removed from pmap_remove_pages(),
the result was worse. But pmap_remove_pages() is called for removing
all user mapping from a process, thus it's quite expected.
Note that the postponed TLB flushes came here from i386 pmap where
hardware TLB flush broadcasting is not available.
Approved by: kib (mentor)
Add -N flag to reboot(8) which bypasses the userland sync(2) during
reboot(8) while still allow the kernel sync during the reboot(2) syscall
to occur.
An example use of this is when rebooting with disconnected iSCSI sessions
which would otherwise cause the reboot to hang on BIOs that will never
complete.
Reviewed by: bjk
MFC after: 2 weeks
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4449
This fixes an issue observed on Cortex A7 (RPi2) and on Cortex A15
(Jetson TK1) causing various memory corruptions. It turned out that
even L2 page table with no valid mapping might be a subject of such
caching.
Note that not all platforms have intermediate TLB caching implemented.
An open question is if this fix is sufficient for all platforms with
this feature.
Approved by: kib (mentor)
Without the patch, there is a race condition: when poll() is invoked(),
if kvp_globals.daemon_busy is false, the daemon won't be timely
woke up, because hv_kvp_send_msg_to_daemon() can't wake up the daemon
in this case.
Submitted by: Dexuan Cui <decui@microsoft.com>
Sponsored by: Microsoft OSTC
Reviewed by: delphij, royger
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4258
Current code doesn't try to make use of the full page when bouncing because
the size is only expanded to be a multiple of the alignment. Instead try to
always create segments of PAGE_SIZE when using bounce pages.
This allows us to remove the specific casing done for
BUS_DMA_KEEP_PG_OFFSET, since the requirement is to make sure the offsets
into contiguous segments are aligned, and now this is done by default.
Sponsored by: Citrix Systems R&D
Reviewed by: hps, kib
Differential revision: https://reviews.freebsd.org/D4119
panics when unloading the dummynet and IPFW modules:
- The callout drain function can sleep and should not be called having
a non-sleepable lock locked. Remove locks around "ipfw_dyn_uninit(0)".
- Add a new "dn_gone" variable to prevent asynchronous restart of
dummynet callouts when unloading the dummynet kernel module.
- Call "dn_reschedule()" locked so that "dn_gone" can be set and
checked atomically with regard to starting a new callout.
Reviewed by: hiren
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3855
This is a holdover from how reset is handled in the ARGE_MDIO world.
You need to define the mdio bus device if you want to use the ethernet
device or the arge setup path doesn't bring the MAC out of reset.
This is not wrong, but was unexpected. Using <empty>:H results in '.' which
then using the rest of the conversion was added in RELDIR. This was also
causing an empty _DP_DIRDEPS to resolve to SRCTOP for DIRDEPS.
Sponsored by: EMC / Isilon Storage Division
This logic is potentially included multiple times, so overwrite the temporary
variable rather than append to it.
Sponsored by: EMC / Isilon Storage Division
This is because LDADD+=-lFOO is not the same as LDADD+=-lprivateFOO which is
what the private libs in LIBADD are.
Sponsored by: EMC / Isilon Storage Division
system call information such as system call arguments. Initially this
will consist of pulling duplicated code out of truss and kdump though it
may prove useful for other utilities in the future.
This commit moves the shared utrace(2) record parser out of kdump into
the library and updates kdump and truss to use it. One difference from
the previous version is that the library version treats unknown events
that start with the "RTLD" signature as unknown events. This simplifies
the interface and allows the consumer to decide how to handle all
non-recognized events. Instead, this function only generates a string
description for known malloc() and RTLD records.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4537
It does not properly import PATH; the PATH is reset by included profile
files on startup which breaks the biggest feature of buildenv (using
sysrooted cc from WORLDTMP)
Spotted by: smh, kib
Sponsored by: EMC / Isilon Storage Division
The new flag, -c <period>, sets the interrupt coalescing period in
microseconds through the new ioat(4) API ioat_set_interrupt_coalesce().
Also add a -z flag to zero ioat statistics before tests, to make it easy
to measure results.
Sponsored by: EMC / Isilon Storage Division
In I/OAT, this is done through the INTRDELAY register. On supported
platforms, this register can coalesce interrupts in a set period to
avoid excessive interrupt load for small descriptor workflows. The
period is configurable anywhere from 1 microsecond to 16.38
milliseconds, in microsecond granularity.
Sponsored by: EMC / Isilon Storage Division
directly into a loader (and thus kernel) env var, using the syntax
ubenv import ldvarname=ubvarname
Without the varname= prefix it uses the historical behavior of importing
to the name uboot.ubvarname.
Tested with RTL8188EU and RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4523
Certain interfaces (e.g. pfsync0) do not have ip6 addresses (in other words,
ifp->if_afdata[AF_INET6] is NULL). Ensure we don't panic when the MTU is
updated.
pfsync interfaces will never have ip6 support, because it's explicitly disabled
in in6_domifattach().
PR: 205194
Reviewed by: melifaro, hrs
Differential Revision: https://reviews.freebsd.org/D4522
sys/dev/mpr/mpr_sas_lsi.c
sys/dev/mps/mps_sas_lsi.c
When mp[rs]sas_get_sata_identify returns
MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR, don't bother retrying. Protocol
errors aren't likely to be fixed by sleeping.
Without this change, a system that generated may protocol errors due
to signal integrity issues was taking more than an hour to boot, due
to all the retries.
Reviewed by: slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4553
