Properly identify target portal when running in proxy mode. While here,
remove CTL_ISCSI_CLOSE, it wasn't used or implemented anyway.
Sponsored by: The FreeBSD Foundation
Add some stuff to make it easier to figure out for the system administrator
whether the ICL_KERNEL_PROXY stuff got compiled in correctly.
Sponsored by: The FreeBSD Foundation
Make it possible for the iSCSI target side to operate in both normal
and ICL_KERNEL_PROXY mode, and fix some bit rot so the latter actually
works again.
Sponsored by: The FreeBSD Foundation
Get rid of the "autoscaling", instead just set socket buffer sizes
in the usual way. The only thing the old code did was making things
less predictable.
MFC r264058:
Fix build, broken by r264025.
Sponsored by: The FreeBSD Foundation
Instead of "icltx" and "iclrx", use thread names with prefix from upper
layer, so that one can see which side of the stack the threads are for.
Sponsored by: The FreeBSD Foundation
Get rid of ICL lock; use upper-layer (initiator or target) lock instead.
This avoids extra locking in icl_pdu_queue(); the upper layer needs to call
it while holding its own lock anyway, to avoid sending PDUs out of order.
Sponsored by: The FreeBSD Foundation
Remove the homegrown ctl_be_block_io allocator, replacing it with UMA.
There is no performance difference.
Reviewed by: mav@
Sponsored by: The FreeBSD Foundation
Hide CTL messages about SCSI error responses. Too many users take
them for actual target errors. They can be enabled back by setting
kern.cam.ctl.verbose=1, or booting with bootverbose.
Sponsored by: The FreeBSD Foundation
When the kernel is running in a virtual machine, it cannot rely upon the
processor family to determine if the workaround for AMD Family 10h Erratum
383 should be enabled. To enable virtual machine migration among a
heterogeneous collection of physical machines, the hypervisor may have
been configured to report an older processor family with a reduced feature
set. Effectively, the reported processor family and its features are like
a "least common denominator" for the collection of machines.
Therefore, when the kernel is running in a virtual machine, instead of
relying upon the processor family, we now test for features that prove
that the underlying processor is not affected by the erratum. (The
features that we test for are unlikely to ever be emulated in software
on an affected physical processor.)
PR: 186061
Add {} braces so that the code conforms to the indentation.
Fortunately, I don't think doing the assignment of cap->tsomax
unconditionally causes any problem.
For an NFSv4 mount with the "nocto" option, don't get the
up to date file attributes upon close. This reduces the
Getattr RPC count by about 65% for software builds.
Modify the NFSv4 client create/mkdir RPC so that it acquires
post-create/mkdir directory attributes. This allows the RPC to
name cache the newly created directory and reduces the lookup RPC
count for applications creating a lot of directories.
Modify the NFSv4 client open/create RPC so that it acquires
post-open/create directory attributes. This allows the RPC to
name cache the newly created file and reduces the lookup RPC
count by about 10% for software builds.
Modify the Lookup RPC for NFSv4 so that it acquires directory
attributes. This allows the client to cache directory names
when they are looked up, reducing the Lookup RPC count by
about 40% for software builds.
Read card capabilities after firmware initialization, instead of setting
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).
Read the range of tids available for the ETHOFLD functionality if it's
enabled.
New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.
r263317:
cxgbe(4): significant rx rework.
- More flexible cluster size selection, including the ability to fall
back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
mbuf chain for any kind of freelist. This replaces two variants: one
for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster. It was limited to 4K clusters
only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes. The driver's
man page will be updated separately.
r263412:
cxgbe(4): if_iqdrops statistic should include tunnel congestion drops.
r263451:
cxgbe(4): man page updates.
Add an option to enable or disable the small RX packet copying that
is done to improve performance of small frames.
When doing RX packing, the RX copying isn't necessarily required.
For NFS mounts using rsize,wsize=65536 over TSO enabled
network interfaces limited to 32 transmit segments, there
are two known issues.
The more serious one is that for an I/O of slightly less than 64K,
the net device driver prepends an ethernet header, resulting in a
TSO segment slightly larger than 64K. Since m_defrag() copies this
into 33 mbuf clusters, the transmit fails with EFBIG.
A tester indicated observing a similar failure using iSCSI.
The second less critical problem is that the network
device driver must copy the mbuf chain via m_defrag()
(m_collapse() is not sufficient), resulting in measurable overhead.
This patch reduces the default size of if_hw_tsomax
slightly, so that the first issue is avoided.
Fixing the second issue will require a way for the
network device driver to inform tcp_output() that it
is limited to 32 transmit segments.
Vlan did not set the value of if_hw_tsomax, so when vlan
was stacked on top of a network interface that set if_hw_tsomax,
tcp_output() would see the default value instead of the value
set by the network interface. This patch modifies vlan so that
it sets if_hw_tsomax to the value of the parent interface.
Lagg did not set the value of if_hw_tsomax, so when lagg
was stacked on top of network interfaces that set if_hw_tsomax,
tcp_output() would see the default value instead of the value
set by the network interface(s). This patch modifies lagg so that
it sets if_hw_tsomax to the minimum of the value(s) for the
underlying network interfaces.
r261533:
cxgbe(4): Use the port's tx channel to identify it to t4_clr_port_stats.
r261536:
cxgbe(4): The T5 allows for a different freelist starvation threshold
for queues with buffer packing. Use the correct value to calculate a
freelist's low water mark.
r261537:
cxgbe(4): Use the rx channel map (instead of the tx channel map) as the
congestion channel map.
r263457:
cxgbe(4): Recognize the "spider" configuration where a T5 card's 40G
QSFP port is presented as 4 distinct 10G SFP+ ports to the driver.
This includes r265236, r265237, r265241 and r265261:
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
- Add the Asus USB-N10 NANO [1]
- Fix panic by adding mtx_assert() to urtwn_init_locked() and
urtwn_stop_locked() [2]
Tested by: Kuan-Chung Chiu <buganini@gmail.com> [1]
Anthony Jenkins <scoobi_doo at yahoo dot com> [2]
- Read and write the MAC address in the config space byte by byte
- Also include the mbuf's csum_flags in an assert message
- Remove stray space
- Move duplicated transmit start code into a single function
- Avoid queue unlock followed by relock when the enable interrupt race
is lost
- Check for a full virtqueue in the multiqueue transmit path
- Do not place the sglist used for Rx/Tx on the stack
- Use m_defrag() instead of m_collapse() to compact a long mbuf chain
