This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
in the LinuxKPI.
This allows synchronize RCU to be used inside a SRCU read section.
No functional change intended.
Bump the __FreeBSD_version to force recompilation of external kernel modules.
PR: 242272
MFC after: 1 week
Sponsored by: Mellanox Technologies
Luoqi Chen reported a problem on freebsd-fs@ where a Linux NFSv4 client
was able to open and write to a file when the file's permissions were
not set to allow the owner write access.
Since NFS servers check file permissions on every write RPC, it is standard
practice to allow the owner of the file to do writes, regardless of
file permissions. This provides POSIX like behaviour, since POSIX only
checks permissions upon open(2).
The traditional way NFS clients handle this is to check access via the
Access operation/RPC and use that to determine if an open(2) on the
client is allowed.
It appears that, for NFSv4, the Linux client expects the NFSv4 Open (not a
POSIX open) operation to fail with NFSERR_ACCES if the file is not being
created and file permissions do not allow owner access, unlike NFSv3.
Since both the Linux and OpenSolaris NFSv4 servers seem to exhibit this
behaviour, this patch changes the FreeBSD NFSv4 server to do the same.
A sysctl called vfs.nfsd.v4openaccess can be set to 0 to return the
NFSv4 server to its previous behaviour.
Since both the Linux and FreeBSD NFSv4 clients seem to exhibit correct
behaviour with the access check for file owner in Open enabled, it is enabled
by default.
Reported by: luoqi.chen@gmail.com
MFC after: 2 weeks
-fno-common will become the default in GCC10/LLVM11. Plenty of work has been
put in to make sure our world builds are no -fno-common clean, so let's slap
the build with this until it becomes the compiler default to ensure we don't
regress.
At this time, we will not be enforcing -fno-common on ports builds. I
suspect most ports will be or quickly become -fno-common clean as they're
naturally built against compilers that default to it, so this will hopefully
become a non-issue in due time. The exception to this, which is actually the
status quo, is that kmods built from ports will continue to build with
-fno-common.
As of the time of writing, I intend to also make stable/12 -fno-common
clean. What's been done will be MFC'd to stable/11 if it's easily applicable
and/or not much work to massage it into being functional, but I anticipate
adding -fcommon to stable/11 builds to maintain its ability to be built with
newer compilers for the rest of its lifetime instead of putting in a third
branch's worth of effort.
The mechanism that generates assym.inc and offset.inc depends on the
symbols in question being common. For now, simply force the object files
to be created with -fcommon.
-fno-common will be the default in GCC10/LLVM11.
Submitted by: arichardson
Reviewed by: kevans
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24322
Peter reported that his dmesg was getting cluttered with
nfsrv_cache_session: no session
messages when he rebooted his NFS server and they did not seem useful.
He was correct, in that these messages are "normal" and expected when
NFSv4.1 or NFSv4.2 are mounted and the server is rebooted.
This patch silences the printf() during the grace period after a reboot.
It also adds the client IP address to the printf(), so that the message
is more useful if/when it occurs. If this happens outside of the
server's grace period, it does indicate something is not working correctly.
Instead of adding yet another nd_XXX argument, the arguments for
nfsrv_cache_session() were simplified to take a "struct nfsrv_descript *".
Reported by: pen@lysator.liu.se
MFC after: 2 weeks
The location of the device-tree blob is passed to the kernel by the
previous booting stage (i.e. BBL or OpenSBI). Currently, we leave it
untouched and mark the 1MB of memory holding it as unavailable.
Instead, do what is done by other fake_preload_metadata() routines and
copy to the DTB to KVA space. This is more in line with what loader(8)
will provide us in the future, and it allows us to reclaim the hole in
physical memory.
Reviewed by: markj, kp (earlier version)
Differential Revision: https://reviews.freebsd.org/D24152
The only way to flush the local hart's icache is with a FENCE.I (or an
equivalent SBI call); a normal FENCE is insufficient and, for the
single-hart case, unnecessary.
Reviewed by: jhb (mentor), markj
Approved by: jhb (mentor), markj
Differential Revision: https://reviews.freebsd.org/D24317
Summary:
The parentheses being in the wrong place means that, for L3 pages,
oldpte has all bits except PTE_V cleared, and so all the subsequent
checks against oldpte will fail, causing us to bail out and not retry
the faulting instruction after an SFENCE.VMA. This causes a WITNESS +
INVARIANTS kernel to fault on the "Chisel P3" (BOOM-based) DARPA SSITH
GFE SoC in pmap_init when writing to pv_table and, being a nofault
entry, subsequently panic with:
panic: vm_fault_lookup: fault on nofault entry, addr: 0xffffffc004e00000
Reviewed by: markj
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D24315
Recognize new micro-architecture in hwpmc_intel driver. Based on Intel
document 325462-071US. Tested with tools/test/hwpmc/pmctest.py
on Atom E3930 SoC.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D24310
SES specifications allows the string to be NULL-terminated, while previous
code was considering it as invalid due to incorrectly ordered conditions.
MFC after: 1 week
Sponsored by: iXsystem, Inc.
When using SACK it can happen there are multiple option headers.
Don't drop these packets, but instead limit the amount of inlining
to the maximum supported.
MFC after: 1 week
Sponsored by: Mellanox Technologies
This includes 14 bytes of ethernet header and 2 bytes of VLAN header.
This allows for making assumptions about the inline size limit
in the fast transmit path later on.
Use a signed integer variable to catch underflow.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Without this patch, the xid used for the client side krpc requests over
UDP was initialized for each "connection". A "connection" for UDP is
rather sketchy and for the kernel NLM a new one is created every 2minutes.
A problem with client side interoperability with a Netapp server for the NLM
was reported and it is believed to be caused by reuse of the same xid.
Although this was never completely diagnosed by the reporter, I could see
how the same xid might get reused, since it is initialized to a value
based on the TOD clock every two minutes.
I suspect initializing the value for every "connection" was inherited from
userland library code, where having a global xid was not practical.
However, implementing a global "xid" for the kernel rpc is straightforward
and will ensure that an xid value is not reused for a long time. This
patch does that and is hoped it will fix the Netapp interoperability
problem.
PR: 245022
Reported by: danny@cs.huji.ac.il
MFC after: 2 weeks
Prepare the ground for a rework of the bridge locking approach. We will
use an epoch-based approach in the datapath and making it safe to
iterate over the interface, span and rtnode lists without holding the
BRIDGE_LOCK. Replace the relevant lists by their ConcurrencyKit
equivalents.
No functional change in this commit.
Reviewed by: emaste, ae, philip (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24249
This lock was made unnecessary by the addition of mac_policy_rms in r356120.
Reviewed by: mjg, kib
Differential Revision: https://reviews.freebsd.org/D24283
The reporter is developing a frame buffer driver for hardware using
3 bytes per pixel, but a stride that's a multiple of 256. Previously
this resulted in writing beyond the end of each stride. On the last
row this attempted to write past the end of the frame buffer, triggering
the assertion in vt_fb_mem_wr1().
PR: 243533
MFC after: 2 weeks
Submitted by: Thomas Skibo
Like the X5000, the main CPLD on the A1222 is the communication medium
between the CPU and the GPIO CPLD. It provides a mailbox communication
feature, along with dual-port RAM accessible from both the CPU and GPIO
CPLD, and 3 fan speed reporting registers.
sync it to disk before shrinking it. Complete the sync before getting
the buffer for the block to be updated to do the shrink to avoid
panicing with a recursive lock on one of the directory's buffers.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
boolean expressions so that their values are not lost when assigned to
`bool' or `int' variables.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
Also, print a little more information for otherwise unhandled inhibited states.
Finally, improve the grammar of some prints. Some of the print statements
missing verb.
Sponsored by: Dell EMC Isilon
Before the change, proxyarp checks for src and dst addresses
were performed using default fib, breaking multi-fib scenario.
PR: 245181
Submitted by: Scott Aitken (original version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24244
This is mostly indentation whitespace, and reflowing a few multiline
comments. This gets a bunch of minor stuff out of the way so that the diffs
for style don't clutter up the diffs for some upcoming functional changes.
Submitted by: Thomas Skibo
Differential Revision: https://reviews.freebsd.org/D24226
Coverity noted that cod pointer is always non-NULL at the end of
cryptodev_aead(). While here, fix cryptodev_op() to match by making
one earlier failure case before cod and crp are allocated just return
directly.
CID: 1422185
Reported by: Coverity
This driver supports SiFive's FE310 Always-on (AON) peripheral's
Real-time clock (RTC) and Watchdog timer (WDT). AON has other
functionality that this driver could support such as the power
management unit (PMU) but that functionality hasn't been implemented.
Reviewed by: philip (mentor), kp (mentor)
Approved by: philip (mentor)
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D24170
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
Assertions in crypto_dispatch() depend on this value being set to
verify that payload and AAD regions are in bounds. Also, requests
that use a single kernel buffer rely on this to know how long the
buffer is for bus_dma, etc.
Reported by: kp
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
This allows clean handoff from BIOS implementing some asynchronous I/O to
the OS AHCI driver. During attach driver declares OS ownership request
and waits from 25ms to 2s for BIOS to complete operation and release the
hardware.
MFC after: 2 weeks
JMB582 has 2 6Gbps SATA ports and PCIe 3.0 x1.
JMB585 has 5 6Gbps SATA ports and PCIe 3.0 x2.
Both chips support AHCI v1.31, Port Multiplier with FBS and 8 MSI vectors.
MFC after: 2 weeks
The log for the failure contained errors like this:
| In file included from ${SRCTOP}/sys/mips/nlm/dev/net/xlpge.c:34:
| In file included from ${SRCTOP}/sys/sys/systm.h:44:
| In file included from ./machine/atomic.h:849:
| ${SRCTOP}/sys/sys/_atomic_subword.h:222:37: error: unknown type name 'u_long'; did you mean 'long'?
| atomic_testandset_acq_long(volatile u_long *p, u_int v)
| ^~~~~~
| long
And similar "unknown type name" errors for u_int, not recognizing bool as a type, etc.
This was caused by including <sys/param.h> too far down; move it up where it belongs.
While here, add a blank line after '__FBSDID()', in keeping with convention.
Reviewed by: emaste
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D24242
for IPv4, enabled only for IPv6, and enabled for IPv4 and IPv6.
The current blackhole detection might classify a temporary outage as
an MTU issue and reduces permanently the MSS. Since the consequences of
such a reduction due to a misclassification are much more drastically
for IPv4 than for IPv6, allow the administrator to enable it for IPv6 only.
Reviewed by: bcr@ (man page), Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24219
