This commit adds two new extensions to crontab, ported from OpenBSD:
- -n: suppress mail on succesful run
- -q: suppress logging of command execution
The -q option appears decades old, but -n is relatively new. The
original proposal by Job Snijder can be found here [1], and gives very
convincing reasons for inclusion in base.
This patch is a nearly identical port of OpenBSD cron for -q and -n
features. It is written to follow existing conventions and style of the
existing codebase.
Example usage:
# should only send email, but won't show up in log
* * * * * -q date
# should not send email
* * * * * -n date
# should not send email or log
* * * * * -n -q date
# should send email because of ping failure
* * * * * -n -q ping -c 1 5.5.5.5
[1]: https://marc.info/?l=openbsd-tech&m=152874866117948&w=2
PR: 237538
Submitted by: Naveen Nathan <freebsd_t.lastninja.net>
Reviewed by: bcr (manpages)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20046
`freebsd-update updatesready' can be used to check if there are any pending
fetched updates that can be installed.
`freebsd-update showconfig' writes freebsd-update's configuration to
stdout.
This also changes the exit code of `freebsd-update install' to 2 in case
there are no updates pending to be installed and there wasn't a fetch phase
in the same invocation. This allows scripts to tell apart these error
conditions without breaking existing jail managers.
See freebsd-update(8) for details.
PR: 240757, 240177, 229346
Reviewed by: manpages (bcr), sectam (emaste), yuripv
Differential Revision: https://reviews.freebsd.org/D21473
message:
On non-x86 systems, use "quarterly" packages.
x86 architectures have "latest" package builds on stable/*, so keep using
those (they'll get switched over to "quarterly" during releases).
The original commit was a direct commit to stable/12, as at the time it
was presumed it would not be necessary for head. However, when it is time
to create a releng branch or switch from PRERELEASE/STABLE to BETA/RC, the
pkg(7) Makefile needs further adjusting. This commit includes those
further adjustments, evaluating the BRANCH variable from release/Makefile
to determine the pkg(7) repository to use.
MFC after: immediate (if possible)
Sponsored by: Rubicon Communications, LLC (Netgate)
igor follows American style guides in the belief that abbreviations i.e.
and e.g. are always followed by a comma. Make that change now so that
future updates to freebsd-update.8 do not complain about this.
Submitted by: grembo
Event: EuroBSDCon Norway FreeBSD DevSummit
log daemon facility now that daemon(8) has syslog support which defaults to
daemon facility, info priority
Reviewed by: bapt
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D21561
pages to page as necessary.
To restore historic BSD behaviour add the following to ntp.conf:
rlimit memlock 32
Discussed on: freebsd-current@ between Sept 6-9, 2019
Reported by: Users using ASLR with stack gap != 0
Reviewed by: ian, kib, rgrimes (all previous versions)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21581
This commit fixes bug: command "jail -r" didn't trigger pre/post stop
commands (and others) defined in config file if jid is specified insted of
name. Also it adds basic tests for usr.sbin/jail to avoid regression.
Reviewed by: jamie, kevans, ray
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D21328
This only lists the changed type and not other attributes so that it
matches the behavior of -C as done in r66747 for fmtree. The NetBSD
-ff implementation was copied from fmtree.
Reviewed by: imp
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21623
location.
With newer import of libedit, the path to be able to access readline/readline.h
will also include header which name will conflict with some expected by ntp in
another path and end up breaking the build.
Setting the B_INVALONERR flag before a synchronous write causes the buf
cache to forcibly invalidate contents if the write fails (BIO_ERROR).
This is intended to be used to allow layers above the buffer cache to make
more informed decisions about when discarding dirty buffers without
successful write is acceptable.
As a proof of concept, use in msdosfs to handle failures to mark the on-disk
'dirty' bit during rw mount or ro->rw update.
Extending this to other filesystems is left as future work.
PR: 210316
Reviewed by: kib (with objections)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21539
All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21503
This code has been written as a proof of concept, but I think that it
can be useful in general. It allows to set the status of an enclosure
slot. Practically, this means controlling whatever slot status LEDs the
enclosure provides. At present, the new command does not have sanity
checks or any conveniences. That means that it is possible to issue the
command for an invalid slot and an enclosure. But the worst I have seen
happening is either the command failing or simply being ignored. Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_. The only way to address a
slot is by the enclosure handle and the slot number. Both are readily
available from mpsutil show commands.
So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.
The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob. Second, it supports setting only
locate / identify status bit.
Tested on HP H220 running LSI IT firmware 20.x.
Reviewed by: bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20535
This patch fixes a bug that made the mixer command enter
an infinite loop when instructed to set the value of a device
to an empty string (e.g., `mixer vol ""`).
Additionally, some tests for mixer(8) are being added.
PR: 240039
Reviewed by: hselasky, mav
Approved by: src (hselasky, mav)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21409
After populating the filesystem, write a FSInfo block with
proper information.
Reviewed by: emaste, cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21363
There is no need to duplicate this file when it can be trivially
shared (just exposing sections previously under #ifdef _KERNEL).
MFC with: r351273
Differential Revision: The FreeBSD Foundation
There is no reason to duplicate this file when it can be trivially
shared (just exposing one section previously under #ifdef _KERNEL).
Reviewed by: imp, cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21346
(The kernel uses caddr_t.)
Suggested by: cem
Reviewed by: cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21348
Add FAT support to makefs by copying some files from sys/fs/msdosfs/ and
updating others with changes from NetBSD.
The six files copied from sys/fs/msdosfs at r348251 and modified are:
denode.h direntry.h fat.h msdosfs_fat.c msdosfs_lookup.c msdosfsmount.h
I would prefer to avoid the duplication, but reluctance to doing so was
expressed in a previous review (D11197); for now copy the files and
revisit in the future.
Submitted by: Siva Mahadevan
Discussed with: cem, imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16438
Apparently using tty for this purpose has been deprecated since 4.4 Lite.
Reviewed by: cy
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D21318
Revision 316342, which introduced the anticongestion feature, failed to
consider that the periodic scripts are executed by a recursive invocation of
periodic. The recursive invocation wrongly cleaned up a temporary file that
should've been cleaned up only by the original invocation. The result is
that if the first script that requests an anticongestion sleep runs after
the security scripts, the sleep won't happen.
Fix this bug by delaying cleanup until the end of the original invocation.
PR: 236564
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
Reviewed by: imp
MFC after: 1 month
When local support was fixed, it introduced a minor bug in formatting. We don't
increment the lpos by enouogh, so lines are a little too long. Adjust to be
correct now with variable length srcprefix.
Inizialize global variables earlier in the process. It doesn't matter today, but
may in the future if we want to access these lists earlier in config's run.
