received frames. Also check driver has valid ifp pointer before
calling msk_stop() in device_shutdown handler. While I'm here
remove unnecessary accesses to interrupt mask registers in
device_shutdown handler because driver puts the controller into
reset state.
With these changes, msk(4) now survive from heavy RX traffic(1byte
UDP frame) while reboot is in progress.
Reported by: Mark Atkinson < atkin901 <> gmail dot com >
by zero of the second argument 'from'.
- Prefer u_int32_t over unsigned int to make its intention more clearer.
- Move the function to a header file and make it a static inline function.
Pointed out by: Andrew Reilly (areilly at bigpond dot net dot au)[1]
MFC after: 3 days
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
information for thread to allow calcru1() (re)use.
Rename ruxagg()->ruxagg_locked(), ruxagg_tlock()->ruxagg() [1].
The ruxagg_locked() function no longer clears thread ticks nor
td_incruntime.
Requested by: attilio [1]
Discussed with: attilio, bde
Reviewed by: bde
Based on submission by: Alexander Krizhanovsky <ak natsys-lab com>
MFC after: 1 week
X-MFC-Note: td_rux shall be moved to the end of struct thread
on Cassini using the external PCS SERDES otherwise unaligned access
traps and other strange effects happen with some machines. Don't touch
the MIF which is unused in that case either. These changes require the
PHY type to use to be determined via the OFW device tree or from the
VPD in machines without the former.
- Disable the SERDES pins of Saturn when not used in order to save power
and ensure they are enabled otherwise.
- In cas_attach() use the correct register offset for CAS_PCS_CONF_EN.
- Add some bus space barriers missing in the PCS code path.
These changes make the Sun GigaSwift Ethernet 1.0 MMF cards as well as
the on-board interfaces found in Sun Fire B100s Blade Server work.
PR: 144867
CTF can not represent enums with more than CTF_MAX_VLEN members, but
ctfconvert will happily ignore that limitation and create CTF section no
other tool can interpret.
This change is different from similar change from upstream, which just
returns an error if big enum is encountered. Doing that means that
every FreeBSD kernel with compiled in hwpmc will have no useable CTF
information due to pmc_event enum having 1236+ members.
objects instead of OBJT_DEFAULT objects because we never reclaim or pageout
the allocated pages. Moreover, they are mapped with pmap_qenter(), which
creates unmanaged mappings.
Reviewed by: kib
scope of the object lock in agp_i810.c. (In this specific case, the scope
of the object lock shouldn't matter, but I don't want to create a bad
example that might be copied to a case where it did matter.)
Reviewed by: kib
variable and can cause problems, without the cliplist handling it works
without problems
- improve the cliplist error handling
- fix VIDIOCGTUNER and VIDIOCSMICROCODE (still no hardware available to test)
Submitted by: J.R. Oldroyd <jr@opal.com>
X-MFC after: soon (together with all the v4l stuff)
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
This option is available in the Linux implementation of pam_krb5
and allows to authorize a user not known to the local system.
Ccache is not used as we don't have a secure uid/gid for the cache file.
Usable for authentication of external kerberos users (e.g Active Directory)
via PAM from applications like Cyrus saslauthd, PHP or perl.
PR: bin/146186
Submitted by: myself
Approved by: deplhij (mentor)
MFC after: 2 weeks
