Commit Graph

12 Commits

Author SHA1 Message Date
sbz
4d7bb3e81a Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by:	cognet
Approved by:	cognet
2013-01-30 18:01:20 +00:00
eadler
92f340b6e7 This isn't functionally identical. In some cases a hint to disable
unit 0 would in fact disable all units.

This reverts r241856

Approved by: cperciva (implicit)
2012-10-22 13:06:09 +00:00
eadler
bc26a2b3b0 Now that device disabling is generic, remove extraneous code from the
device drivers that used to provide this feature.

Reviewed by:	des
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:41:14 +00:00
jkim
c330d907d8 - Add support for Family 12h, 14h and 15h processors.
- Remove all attempts to guess physical temperature using DiodeOffset.
There are too many reports that it varies wildly depending on motherboard.
Instead, if it is known to scale well and its offset is known from other
temperature sensors on board, the user may set "dev.amdtemp.0.sensor_offset"
tunable to compensate the difference.  Document the caveats in amdtemp(4).
- Add a quirk for Socket AM2 Revision G processors.  These processors are
known to have a different offset according to Linux k8temp driver.
- Warn about Family 10h Erratum 319.  These processors have broken sensors.
- Report temperature in more logical orders under dev.amdtemp node.  For
example, "dev.amdtemp.0.sensor0.core0" is now "dev.amdtemp.0.core0.sensor0".
- Replace K8, K10 and K11 with official processor names in amdtemp(4).
2012-02-24 00:02:46 +00:00
jkim
f70487e834 Restore (undocumented) support for early revisions and add more comments.
Reported by:	kris
2009-09-14 23:08:19 +00:00
jkim
20c3312db2 Fix typos in comments from the previous commit. 2009-09-11 22:05:59 +00:00
jkim
46839b8eeb Improve amdtemp(4) significantly:
- Improve newer AMD processor support (Family 0Fh Revision F and later).
- Adjust offset if DiodeOffet is set and valid.  Note it is experimental
but it seems to give us more realistic temperatures.  Newer Linux driver
blindly adds 21C for Family 0Fh desktop processors, however.
- Always populate dev.cpu and dev.amdtemp sysctl trees regardless of probe
order for consistency.  Previously, dev.cpu.N.temperature was not populated
if amdtemp was loaded later than ACPI CPU driver and temperatures were not
accessible from dev.amdtemp.N.sensor0 tree for Family 10h/11h processors.
- Read the CPUID from PCI register instead of CPUID instruction to prevent
possible revision mismatches on multi-socket system.
- Change macros and variables to make them closer to AMD documents.
- Fix style(9) nits and improve comments.
2009-09-11 21:47:44 +00:00
jhb
9b0755de9f Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
attilio
7f42e47a67 Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
rpaulo
f878bd61c5 Fix comment explaining where this driver came from.
MFC after:	2 weeks
2009-03-13 16:43:31 +00:00
rpaulo
8fb8045bea Rename all the variables/function names/structs/etc. to reflect the
driver name change.
While there, update copyright.

MFC after:	2 weeks
2009-03-13 16:28:25 +00:00
rpaulo
1255db75cd Rename the k8temp driver to amdtemp.
MFC after:	2 weeks
2009-03-13 16:08:08 +00:00