The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
r349369 removed IP_MIN_MEMBERSHIPS and IPV6_MIN_MEMBERSHIPS, and r349893
removed TCP_RACK_SESS_CWV. libsysdecode lacked dependencies to trigger a
rebuild of tables.h.
Add explicit dependencies as a workaround to address these specific
cases; a holistic solution is still needed.
Sponsored by: The FreeBSD Foundation
There was an additional + after the {6} which is apparently ignored by the
FreeBSD regex implementation but was giving me an error when compiling on
MacOS.
While changing this also make sure that tables.h is not created if mktables
fails. The current rule would create a partial tables.h which causes following
incremental builds to use that broken file and fail with an unrelated
compilation error or even succeed even though they shouldn't.
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D17069
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
Only filter out the PF ioctls if we're building without pf support.
Until now those were always filtered out, so truss did not show symbolic
names for pf ioctls.
Differential Revision: https://reviews.freebsd.org/D11629
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Add a new sysdecode_getrusage_who() which decodes the RUSAGE_* constant
passed as the first argument to getrusage(). Use this function in both
kdump and truss to decode the first argument to getrusage().
PR: 215448
Submitted by: Anton Yuzhaninov <citrin+pr@citrin.ru>
MFC after: 1 month
Decoding of the third argument depends on the first one. For doing this,
add a corresponding function to libsysdecode.
Thanks to jhb@ for suggesting this.
As a followup to r310638, update libsysdecode (and kdump) to decode the
'mode' argument to getfsstat(). sysdecode_getfsstat_flags() has been
renamed to sysdecode_getfsstat_mode() and now treats the argument as an
enumerated value rather than a mask of flags.
This should fix the lib32 build since it was not removing the generated
ioctl.c. This file is generated by a find(1) call, so cannot use normal
dependency tracking methods.
Reported by: jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Restructure this script so that it generates a header of tables instead
of a source file. The tables are included in a flags.c source file which
provides functions to decode various system call arguments.
For functions that decode an enumeration, the function returns a pointer
to a string for known values and NULL for unknown values.
For functions that do more complex decoding (typically of a bitmask), the
function accepts a pointer to a FILE object (open_memstream() can be used
as a string builder) to which decoded values are written. If the
function operates on a bitmask, the function returns true if any bits
were decoded or false if the entire value was valid. Additionally, the
third argument accepts a pointer to a value to which any undecoded bits
are stored. This pointer can be NULL if the caller doesn't care about
remaining bits.
Convert kdump over to using decoder functions from libsysdecode instead of
mksubr. truss also uses decoders from libsysdecode instead of private
lookup tables, though lookup tables for objects not decoded by kdump remain
in truss for now. Eventually most of these tables should move into
libsysdecode as the automated table generation approach from mksubr is
less stale than the static tables in truss.
Some changes have been made to truss and kdump output:
- The flags passed to open() are now properly decoded in that one of
O_RDONLY, O_RDWR, O_WRONLY, or O_EXEC is always included in a decoded
mask.
- Optional arguments to open(), openat(), and fcntl() are only printed
in kdump if they exist (e.g. the mode is only printed for open() if
O_CREAT is set in the flags).
- Print argument to F_GETLK/SETLK/SETLKW in kdump as a pointer, not int.
- Include all procctl() commands.
- Correctly decode pipe2() flags in truss by not assuming full
open()-like flags with O_RDONLY, etc.
- Decode file flags passed to *chflags() as file flags (UF_* and SF_*)
rather than as a file mode.
- Fix decoding of quotactl() commands by splitting out the two command
components instead of assuming the raw command value matches the
primary command component.
In addition, truss and kdump now build without triggering any warnings.
All of the sysdecode manpages now include the required headers in the
synopsis.
Reviewed by: kib (several older versions), wblock (manpages)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7847
Add two new functions, sysdecode_abi_to_freebsd_errno() and
sysdecode_freebsd_to_abi_errno(), which convert errno values between
the native FreeBSD ABI and other supported ABIs. Note that the
mappings are not necessarily perfect meaning in some cases multiple
errors in one ABI might map to a single error in another ABI. In that
case, the reverse mapping will return one of the errors that maps, but
which error is non-deterministic.
Change truss to always report the raw error value to the user but
use libsysdecode to map it to a native errno value that can be used
with strerror() to generate a description. Previously truss reported
the "converted" error value. Now the user will always see the exact
error value that the application sees.
Change kdump to report the truly raw error value to the user. Previously
kdump would report the absolute value of the raw error value (so for
Linux binaries it didn't output the FreeBSD error value, but the positive
value of the Linux error). Now it reports the real (i.e. negative) error
value for Linux binaries. Also, use libsysdecode to convert the native
FreeBSD error reported in the ktrace record to the raw error used by the
ABI. This means that the Linux ABI can now be handled directly in
ktrsysret() and removes the need for linux_ktrsysret().
Reviewed by: bdrewery, kib
Helpful notes: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5314
A new sysdecode_syscallname() function accepts a system call code and
returns a string of the corresponding name (or NULL if the code is
unknown). To support different process ABIs, the new function accepts a
value from a new sysdecode_abi enum as its first argument to select the
ABI in use. Current ABIs supported include FREEBSD (native binaries),
FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are
supported by all platforms. In general, a given ABI is only supported
if a platform can execute binaries for that ABI.
To simplify the implementation, libsysdecode's build reuses the
existing pre-generated files from the kernel source tree rather than
duplicating new copies of said files during the build.
kdump(1) and truss(1) now use these functions to map system call
identifiers to names. For kdump(1), a new 'syscallname()' function
consolidates duplicated code from ktrsyscall() and ktrsyscallret().
The Linux ABI no longer requires custom handling for ktrsyscall() and
linux_ktrsyscall() has been removed as a result.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4823
sysdecode_ioctlname() function. This function matches the behavior
of the truss variant in that it returns a pointer to a string description
for known ioctls. The caller is responsible for displaying unknown
ioctl requests. For kdump this meant moving the logic to handle unknown
ioctl requests out of the generated function and into an ioctlname()
function in kdump.c instead.
Differential Revision: https://reviews.freebsd.org/D4610
system call information such as system call arguments. Initially this
will consist of pulling duplicated code out of truss and kdump though it
may prove useful for other utilities in the future.
This commit moves the shared utrace(2) record parser out of kdump into
the library and updates kdump and truss to use it. One difference from
the previous version is that the library version treats unknown events
that start with the "RTLD" signature as unknown events. This simplifies
the interface and allows the consumer to decide how to handle all
non-recognized events. Instead, this function only generates a string
description for known malloc() and RTLD records.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4537
