Previously a command like "strings f1 f2 f3" reported the exit status
based only on processing the last file.
As with GNU strings, report an error exit status if an error was
encountered processing any of the files. While here simplify the
exit status handling to just success (0) / failure (1).
Reviewed by: brooks
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8334
The mode of operation (elfcopy, mcs, or strip) is chosen based on the
program name. Broaden this to allow a substring match at the end of the
name to allow prefixes - for example, bsdstrip or aarch64-freebsd-strip.
This improves use of these tools as drop-in replacements for GNU objcopy
and strip, which are often built with a limited set of supported targets
and installed with a target prefix for cross tools.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1663
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
It fails with: "dir/b did not receive NOTE_LINK"
Also, add needed cleanup logic to cleanup the mountpoint after the fact
MFC after: 2 weeks
PR: 213662
Sponsored by: Dell EMC Isilon
- Add inttypes.h #include for PRId64 macro
- Use FreeBSD's copy of getfh(2), which doesn't include a `fh_size` parameter.
Use sizeof(fhandle_t) instead as the size of fhp is always fixed as
fhandle_t, unlike NetBSD's copy of fhp, which is void*.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Unfortunately removing files with uchg set always succeeds with root on
FreeBSD. Unfortunately running the test as an unprivileged user isn't doable
because mounting tmpfs requires root
PR: 212861
Sponsored by: Dell EMC Isilon
The mandoc search database generation uses each page's inode number as
a hash key to index hard linked pages only once. However, it also
processed the pages ordered by hash key resulting in effectively non-
deterministic output.
Instead:
1) provide fts_open() with a comparison function to process directories
and files in a deterministic order
2) in addition to the existing hash, insert pages into a linked list
which will be sorted (by virtue of 1)
3) iterate over pages by the list in 2, instead of hash order
I will work on upstreaming this change.
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8213
Don't warn about valid time zone abbreviations. POSIX
through 2000 says that an abbreviation cannot start with ':', and
cannot contain ',', '-', '+', NUL, or a digit. POSIX from 2001
on changes this rule to say that an abbreviation can contain only
'-', '+', and alphanumeric characters from the portable character
set in the current locale. To be portable to both sets of rules,
an abbreviation must therefore use only ASCII letters." Adapted
from tzcode2015f.
This is needed to be able to update tzdata to a newer version
MFC after: 3 days
With a short needle (aka little) musl's memmem could read past the end
of the haystack (aka big). This was fixed in musl commit c718f9f.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8137
This commit is from John Marino in dragonfly with the following commit log:
====
This was a CTYPE encoding error involving consecutive points of the same
ctype. It was reported by myself to Illumos over a year ago but I was
unsure if it was only happening on BSD. Given the cause, the bug is also
present on Illumos.
Basically, if consecutive points were of the exact same ctype, they would
be defined as a range regardless. For example, all of these would be
considered equivalent:
<A> ... <C>, <H> (converts to <A> .. <H>)
<A>, <B>, <H> (converts to <A> .. <H>)
<A>, <J> ... <H> (converts to <A> .. <H>)
So all the points that shouldn't have been defined got "bridged" by the
extreme points.
The effects were recently reported to FreeBSD on PR 213013. There are
countless places were the ctype flags are misdefined, so this is a major
fix that has to be MFC'd.
====
This reveals a bad change I did on the testsuite: while 0x07FF is a valid
unicode it is not used yet (reserved for future use)
PR: 213013
Submitted by: marino@
Reported by: Kurtis Rader <krader@skepticism.us>
Obtained from: Dragonfly
MFC after: 1 month
The blacklistd daemon expects to see a message on stdout, instead
of just relying on the exit value from any invoked programs.
Change the pf filtering to create multiple filters, attached under
a the "blacklist/*" anchor point. This prevents the filtering for
each port's filtering rule from overwriting the previously installed
filtering rule. Check for an existing filtering rule for each port,
so the installation of a given filtering rule only happens once.
Reinstalling the same rule resets the counters for the pf rule, and
we don't want that.
Reported by: David Horn (dhorn2000 at gmail.com)
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8081
Sync libarchive with vendor including security fixes.
Important vendor bugfixes (relevant to FreeBSD):
#747: Out of bounds read in mtree parser
#761: heap-based buffer overflow in read_Header (7-zip)
#784: Invalid file on bsdtar command line results in internal errors (1)
PR: 213092 (1)
MFC after: 1 week
The blacklistd daemon attempted to restore the filtering rules
before the database of blocked addresses was opened, so no rules
were being reloaded. Now the rules are properly recreated when the
daemon is started with '-r'.
This bug was fixed locally, and then sent upstream to NetBSD.
This changeset is the import the NetBSD version of the change,
which added debugging output to alert about a null database.
Reviewed by: emaste
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
build can break when different source files create the same target
files (case-insensitivity speaking). This is the case for object
files compiled with -fpic and shared libraries. The former uses
an extension of ".So", and the latter an extension ".so". Rename
shared object files from *.So to *.pico to match what NetBSD does.
Missed in r306297
MFC after: 1 month
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7906
Use mdmfs/mdconfig instead of vndconfig/newfs. vndconfig doesn't exist on FreeBSD.
TODO: need to parameterize out the md(4) device as it's currently hardcoded to "3"
(in both the FreeBSD and NetBSD cases).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
The `mknod <file> p` command doesn't exist on FreeBSD, like on NetBSD. Use
mkfifo instead to create named pipes (FIFOs).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Similar to r306030, use a simpler method for getting the value of
`hw.pagesize`, i.e. `sysctl -n hw.pagesize`. The awk filtering method doesn't
work on FreeBSD
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Use kldstat -m to determine whether or not a filesystem is loaded. This works
well with tmpfs, ufs, and zfs
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Use a simpler way of dumping kern.maxvnodes, i.e. `sysctl -n kern.maxvnodes`
The awk filtering method employed in NetBSD doesn't work on FreeBSD
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Sync libarchive with vendor including important security fixes.
Issues fixed (FreeBSD):
PR #778: ACL error handling
Issue #745: Symlink check prefix optimization is too aggressive
Issue #746: Hard links with data can evade sandboxing restrictions
This update fixes the vulnerability #3 and vulnerability #4 as reported in
"non-cryptanalytic attacks against FreeBSD update components".
https://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Fix for vulnerability #2 has already been merged in r304989.
MFC after: 1 week
Security: http://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
format specifier for pointers when printing them out with printf(3)
MFC after: 57 days
Pointyhat to: ngie
Reported by: bz, cy, Jenkins (i386 job)
Submitted by: cy
Sponsored by: EMC / Isilon Storage Division
- Require root in the tcp/udp subtests (it's needed on FreeBSD when
registering services).
- Skip the tests if service registration fails.
MFC after: 59 days
X-MFC with: r305358
Reported by: Jenkins, rodrigc
Sponsored by: EMC / Isilon Storage Division
