- Now that apm loadable module can inform its existence to other kernel
components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack).
- Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose.
- Add simple arbitration mechanism for APM vs. ACPI. This prevents
the kernel enables both of them.
- Remove obsolete `#ifdef DEV_APM' related code.
- Add abstracted interface for Powermanagement operations. Public apm(4)
functions, such as apm_suspend(), should be replaced new interfaces.
Currently only power_pm_suspend (successor of apm_suspend) is implemented.
Reviewed by: peter, arch@ and audit@
us a lot on older Alphas.
Andrew Gallatin, Thomas V. Crimi, and Peter Jeremy contributed to this
work along with the submitter.
Submitted by: Andrew M. Miklic <miklic@home.com>
dedicated" mode. This was specifying that there are 256 (illegal!)
heads on the disk. If bioses store that in a byte, and it gets truncated
to 0, then that almost certainly causes the infamous divide-by-zero
nightmare.
This is also most likely the reason why the Thinkpad T20/A20 series
were locking up when FreeBSD was installed. This is also the most likely
reason why a boot1 being present causes an IA64 box to lock up at boot.
(removing the "part4" stuff from boot1.s fixes the IA64 boxes and would
most likely have fixed the T20/A20 and some TP600E series thinkpads)
booted from it when doing an installkernel.
Only change kern.bootfile from ${DESTDIR}${KODIR}/${KERNEL_KO}
to ${DESTDIR}${KODIR}.old/${KERNEL_KO}, and only when we're renaming
a booted ${DESTDIR}${KODIR}/${KERNEL_KO} kernel.
a temporary fix so that we can compile kernels. I waited 30 minutes
for a response from the person who would likely know, but any longer
is too long to wait with breakage at ToT.
(allocating pv entries w/ zalloci) when called in a loop due to
an madvise(). It is possible to completely exhaust the free page list and
cause a system panic when an expected allocation fails.
called and ip_output() encounters an error and bails (i.e. host
unreachable), we will leak an mbuf. This is because the code calls
m_freem(m0) after jumping to the bad: label at the end of the function,
when it should be calling m_freem(m). (m0 is the original mbuf list
_without_ the options mbuf prepended.)
Obtained from: NetBSD
ifconfig, which expects the address returned by the SIOCGIFNETMASK ioctl
to have a valid sa_family. Similar changes may be necessary for IPv6.
While we're here, get rid of an unnecessary temp variable.
MFC after: 2 weeks
this accross suspend/resume events and this was causing the dreaded false
positive hit on my "static bug" test.
Note: the PCI bus code should do this for us.
Note2: We don't do the same for I/O based pci devices since it is
more code and doesn't appear to be necessary.
Submitted by: Toshiyuki Kawashima-san <tos@fa2.so-net.ne.jp>
Obtained from: bsd-nomads:16012
function symbols in the kernel in a list of C strings, with an extra
nul-termination at the end.
This sysctl requires addition of a new linker operation. Now,
linker_file_t's need to respond to "each_function_name" to export
their function symbols.
Note that the sysctl doesn't currently allow distinguishing multiple
symbols with the same name from different modules, but could quite
easily without a change to the linker operation. This will be a nicety
to have when it can be used.
Obtained from: NAI Labs CBOSS project
Funded by: DARPA
by the profiler on a running system. This is not done sparsely, as
memory is cheaper than processor speed and each gprof mcount() and
mexitcount() operation is already very expensive.
Obtained from: NAI Labs CBOSS project
Funded by: DARPA
- Add a new MIB for battery info expire time in order to make it changeable.
Battery info expire time can be specified by
hw.acpi.battery.info_expire in sec.
- Add own MALLOC type and fix some potential memory leakages.
- Change some frequent printings to verbose printing.
- Stop timeout during acpi_cmbat_get_bst() too. This should reduce
the races with BIF evaluation.
- Remove acpi_cmbat_get_bif() invocation from acpi_cmbat_attach().
This was redundant because this should be called from
acpi_cmbat_timeout() now.
hooks depending on ethertype. Great for prototyping protocols.
connects to the lower and upper hooks of an ethernet type of node.
Obtained from: Monzoon Networks.
Thanks to Andre Oppermann, May 2001.
Remove asm functions to call the openfirmware and kernel entry points;
we can just call them directly.
Don't use the stack pointer for an intermediate result in setx.
Put the stack in the bss.
- Give a guaranteed minimum cooling run time to avoid too frequent
cooling system On/Off switching. The minimum cooling run time can be
specified by hw.acpi.thermal.min_runtime in sec.
- Refine message printing (_AC-1 -> NONE).
- Add verbose mode enable/disable capability by hw.acpi.verbose in bool.
Reviewed by: acpi-jp@ folks
is npx.c's job and setting it here breaks the edit-time option of not
setting it in npx.c. (It is not set in the right places for the SMP
case, but always setting it here is harmless because there isn't even
an edit-time option to not set it.)
* Implement a fairly simplistic parser for unwinding stack frames.
* Use unwind records for DDB's 'trace' command. Also add support for
tracing past exceptions to the context which generated the exception.
The stack unwind code requires a toolchain based on binutils-2.11.2 or
later and gcc-3.0.1 or later.
starts at offset 8; not 6. Hence the structure is 12 bytes and
not 10 bytes. Adjust the definition so that the ProcessorEnabled
flag is moved from bit 15 to bit 31 in the Flags field.
The definition now matches ACPI 2.0 Errata 1.5.
do it as a side-effect of probing for MP hardware. This allows
us to scan for local SAPICs early (especially before MBUF
initialization).
o Fix the Local SAPIC structure so that matches the Local SAPIC
table entry. Now that the Local SAPIC info is the same as the
Local APIC info, stop dumping the Local APIC entries.
o For every Local SAPIC entry in the MADT that's not disabled,
let the SMP code know about it. They represent actual CPUs.
o Register the OS_BOOT_RENDEZ entry point and provide a (bogus)
implementation for the entry point.
o Provide a mapping for internal IPI numbers to ExtINT vectors.
o In a MP system, announce the CPUs and start them by sending
IPI_AP_WAKEUP to each of them. Not that it makes a difference
at this time :-)
o Miscellaneous style fixes and other adjustments.
number) instead of allocating next free unit for them. If someone needs
fixed place, he must specify it correctly. "Allocating next" is especially bad
because leads to double device detection and to "repeat make_dev panic" as
result. This can happens if the same devices present somewhere on PCI bus,
hints and ACPI. Making them present in one place only not always
possible, "sc" f.e. can't be removed from hints, it results to no console at
all.
2) In make_device(), detect when devclass_add_device() fails, free dev and
return. I.e. add missing error checking. This part needed to finish fix in 1),
but must be done this way in anycase, with old variant too.
non-existent disk in a legacy /dev on a DEVFS system would panic the system
if stat(2)'ed.
Do not whine about anonymous device nodes not having a si_devsw, they're
not supposed to.
Make it a panic to repeat make_dev() or destroy_dev(), this check
should maybe be neutered when -current goes -stable.
Whine if devsw() is called on anon dev_t's in a devfs system.
Make a hack to avoid our lazy-eval disk code triggering the above whine.
Fix the multiple make_dev() in disk code by making ${disk}${unit}s${slice}
an alias/symlink to ${disk}${unit}s${slice}c
linux_emul_path anyway. Linux_emul_find() has interesting bugs in its
prefix handling (which luckily are not currently exploitable); this
commit is preliminary to an attempt at cleaning it up.
Approved by: marcel
it has not yet returned. Use this flag to deny debugging requests while
the process is execve()ing, and close once and for all any race conditions
that might occur between execve() and various debugging interfaces.
Reviewed by: jhb, rwatson
strip the space from '( struct thread *...', wrap long lines.
o Remove an unneeded comment on the topic of no lock being required as
part of the NDINIT() in __acl_get_file(), as it's really not required
there.
Obtained from: TrustedBSD Project
coerces the deletion of a default ACL on a directory when no default
ACL EA is present to success. Because the UFS EA implementation doesn't
disinguish the EA failure modes "that EA name has not been
administratively enabled" from "that EA name has no defined data",
there's a potential conflict in error return values. Normally, the
lack of administratively configured EA support is coerced to
EOPNOTSUPP to indicate that ACLs are not available; in this case,
it is possible to get a successful return, even if ACLs are not
available because EA support for them has not been enabled.
Expand the comment in ufs_setacl() to identify this case.
Obtained from: TrustedBSD Project
from ufs_extattr_enable_with_open().
o Print auto-start notifications if (bootverbose). This was previously
commented out since it didn't know how to check for bootverbose.
o Drop in comments throughout indicating where ENOENT should be replaced
with ENOATTR once that is available.
Obtained from: TrustedBSD Project
implementation to replace single-character namespace prefixes, '$' is no
longer an invalid attribute name, and the namespace is relevant to
validity determination.
o Remove '$' case from ufs_extattr_valid_attrname()
o Add attrnamespace argument to ufs_extattr_valid_attrname(), and
fill out appropriately.
Currently no decisions are made based on the namespace argument, but
may be in the future.
Obtained from: TrustedBSD Project
in the 21143, instead of giving priority to the receive unit.
This gives a 10-15% performance improvement in the forwarding rate
under heavy load.
Reviewed-by: Bill Paul
Small tweaks to kldxref may be necessary to avoid the surprising (but harm-
less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if
it is present in the kernel directory.
Approved by: a week of silence on -arch
MFC after: 2 weeks
in bind() and connect(). Linux doesn't care if the length of the
sockaddr matches its address family; FreeBSD does. This fixes the
known issues with the resolver in linux_base-7.
of Giant during the Giant unwinding phase, and start work on instrumenting
Giant for the file and proc mutexes.
These wrappers allow developers to turn on and off Giant around various
subsystems. DEVELOPERS SHOULD NEVER TURN OFF GIANT AROUND A SUBSYSTEM JUST
BECAUSE THE SYSCTL EXISTS! General developers should only considering
turning on Giant for a subsystem whos default is off (to help track down
bugs). Only developers working on particular subsystems who know what
they are doing should consider turning off Giant.
These wrappers will greatly improve our ability to unwind Giant and test
the kernel on a (mostly) subsystem by subsystem basis. They allow Giant
unwinding developers (GUDs) to emplace appropriate subsystem and structural
mutexes in the main tree and then request that the larger community test
the work by turning off Giant around the subsystem(s), without the larger
community having to mess around with patches. These wrappers also allow
GUDs to boot into a (more likely to be) working system in the midst of
their unwinding work and to test that work under more controlled
circumstances.
There is a master sysctl, kern.giant.all, which defaults to 0 (off). If
turned on it overrides *ALL* other kern.giant sysctls and forces Giant to
be turned on for all wrapped subsystems. If turned off then Giant around
individual subsystems are controlled by various other kern.giant.XXX sysctls.
Code which overlaps multiple subsystems must have all related subsystem Giant
sysctls turned off in order to run without Giant.
while it is on a queue with the queue lock and remove the per-task locks.
- Remove TASK_DESTROY now that it is no longer needed.
- Go back to inlining TASK_INIT now that it is short again.
Inspired by: dfr
This emulates APM device node interface APIs (mainly ioctl) and
provides APM services for the applications. The goal is to support
most of APM applications without any changes.
Implemented ioctls in this commit are:
- APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl)
- APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl)
- APMIO_GETINFO and APMIO_GETINFO_OLD
- APMIO_GETPWSTATUS
With above, many APM applications which get batteries, ac-line
info. and transition the system into suspend/standby mode (such as
wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)
Reviewed by: arch@, audit@ and some guys
to avoid most of the double character kernel goop we've been having by having
both a prom console && a normal console.
Was not able to test with graphics head. Hope this doesn't break anything.
Reviewed by: silence on alpha
which may or may not return something which is partially right.
Disable the "devices" file until we find out what this is needed for,
and what exactly those apps need.
This will allow cdevsw to become static again.
Approved by: DES
userland. The per thread ucred reference is immutable and thus needs no
locks to be read. However, until all the proc locking associated with
writes to p_ucred are completed, it is still not safe to use the per-thread
reference.
Tested on: x86 (SMP), alpha, sparc64
queue, and a mutex to protect the global list of taskqueues. The only
visible change is that a TASK_DESTROY() macro has been added to mirror
the TASK_INIT() macro to destroy a task before it is free'd.
Submitted by: Andrew Reiter <awr@watson.org>
splhigh() before the mtx_unlock and tsleep(). The splhigh() was probably
correct in the original code using simplelocks but is not correct in
5.0-current.
Noticed by: Andrew Reiter <awr@FreeBSD.org>
real effect.
Optimize vfs_msync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. Improves looping case by 500%.
Optimize ffs_sync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. This makes a couple of assumptions,
which I believe are ok, in regards to vnode stability when the mount list
mutex is held. Improves looping case by 500%.
(more optimization work is needed on top of these fixes)
MFC after: 1 week
sanity check after every directory modification. This check can be
re-enabled at any time by setting the sysctl "vfs.ufs.dirhash_docheck"
to 1.
This group of sanity tests was there to ensure that any UFS_DIRHASH
bugs could be caught by a panic before a potentially corrupted
directory block would be written to disk. It has served its main
purpose now, so disable it in the interest of performance.
MFC after: 1 week
or the cluster will not be properly merged. Dup the code from
cluster_wbuild() and add some printf()s to see if bad cases are present.
MFC after: 2 weeks
to do it explicitly in nfsrv_noop so that the reply gets sent back
to the client. This fixes the generation of a selection of RPC
error replies (RPC_PROGMISMATCH, RPC_PROGUNAVAIL, RPC_PROCUNAVAIL
etc.) that are used by some clients to detect support for optional
protocols and features.
Reviewed by: peter
Reported by: Thomas Quinot <quinot@inf.enst.fr>
PR: kern/31479
- Fix a bug in the LDT changes where the wrong argument was passed to
set_user_ldt() from cpu_switch(). The bug was passing a pointer to the
ldt, but set_user_ldt() takes a pointer to the process' mdproc structure.
Submitted by: bde
defeats the point of LINT to comment out positive options.
Fixed style bugs in rev.1.973:
- disordering of PCI options list.
- missing space after "options".
- line longer than 80 characters.
- bogus quoting of "BIOS".
