17 Commits

Author SHA1 Message Date
andrew
ea49382feb Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with
memory at the end of the kernel.

This helps reduce the SoC and board specific configuration required.

Reviewed by:	bsdimp
Tested by:	jmg (armeb), br
2014-01-28 09:12:04 +00:00
ian
60d7652a68 Add a default do-nothing implementation of fdt_pci_devmap() using a weak alias,
so that we don't need an empty implementation of it for every Marvell platform
that has no PCI.  This allows the removal of the SheevaPlug-specific stub and
config files, and eliminates the need to add similar stubs for future models.

Marvell platforms that do expose PCI are compiled with 'device pci' which
causes the real (non-weak) implementation in dev/fdt/fdt_pci.c to be used.

Approved by:	cognet (mentor)
2013-01-27 00:39:02 +00:00
gonzo
8b8633cc98 Merging of projects/armv6, part 7
Add Marvell ARMADA XP support

Obtained from:	Marvell, Semihalf
2012-08-15 05:15:49 +00:00
hrs
b36d757c0b Add support for Marvell 88F6282.
Sponsored by:	Plat'Home, Co.,Ltd.
2012-07-28 21:56:24 +00:00
raj
38ed317cdb Now that we are fully FDT-driven on MRVL platforms, remove PHYSMEM_SIZE option. 2010-07-19 19:19:33 +00:00
raj
48f2ce50e5 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
raj
98316db4c6 Provide correct TCLK value for Kirkwood A1 silicon revision.
While there improve SOC ID output accordingly.

Obtained from:	Semihalf
MFC after:	1 week
2010-03-05 19:45:45 +00:00
raj
5f0a3583a9 Introduce SheevaPlug support.
- The device is based on Marvell 88F6281 system on chip.
  - More info about the platform at http://www.plugcomputer.org

  - To build the FreeBSD kernel:
    make buildkernel TARGET_ARCH=arm KERNCONF=SHEEVAPLUG

  - Installation notes at: http://wiki.freebsd.org/FreeBSDMarvell

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 10:09:25 +00:00
raj
70c6d45902 Exclude common Kirkwood settings so they can be shared among various platforms
based on this SOC. This is a preliminary step for SheevaPlug support.

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:39:11 +00:00
raj
c1a2d532dd Eliminate platform_pmap_init() to simplify Marvell bootstrap code. 2009-08-25 09:30:03 +00:00
raj
2ee270938d Enable all populated TWSI (I2C) controllers on Marvell SOCs.
Obtained from:	Semihalf
2009-06-25 10:03:51 +00:00
raj
ea29110cd5 Introduce ata(4) support for Marvell integrated SATA controllers (found on
88F5xxx, 88F6xxx and MV78xxx system on chip devices).

Reviewed by:	stas
Obtained from:	Semihalf
2009-06-24 15:41:18 +00:00
marcel
2c1e7a89ea Move the memory layout definitions and logic from mvreg.h to mvwin.h
so that it isn't exposured unless needed. In particular this means
that it's easier to tune the memory layout based on board details.
While here, remove inclusion of <machine/intr.h> from mvreg.h. This
also contains exposure to SoC specifics in MI drivers, because NIRQ
depends on the SoC.
2009-06-12 20:00:38 +00:00
raj
fa4df0b07e Improve and extend Marvell SOCs platform code.
- Allow for setting per platform MPP/GPIO configuration in the kernel, so
  that we can override all settings firmware might set.

- Set decode windows for the remaining on-chip peripherals: CESA, SATA and XOR.

- Improve handling of USB controllers so that all port are available on the
  given SOC/platform (e.g. up to three on DB-78xxx), this includes rework of
  USB decode windows set-up.

- Other minor fixes and cosmetics.

Obtained from:	Semihalf
2009-01-08 18:31:43 +00:00
raj
8211555cce Adjust Marvell SOC support for A0 chip revision.
- Clean up TCLK handling so that it's dynamically recognized depending on
  registers settings or chip version/revision. Update registers definitions.

- Teach SOC ident routine about A0 (initial silicon version for general
  audience)

Obtained from:	Marvell, Semihalf
2009-01-08 13:20:28 +00:00
raj
d985db3ad5 PCI/PCI-Express support for Marvell systems.
Obtained from:	Marvell, Semihalf
2008-11-19 11:30:44 +00:00
raj
3226c13778 Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00