Commit Graph

6212 Commits

Author SHA1 Message Date
uqs
8f44a70be6 gsched(8) was first released with FreeBSD 8.1
MFC after:	3 days
2010-07-30 12:56:34 +00:00
pjd
f97655c71d Fix typo.
PR:		docs/149033
Submitted by:	Kolar <hsn@sendmail.cz>
MFC after:	3 days
2010-07-29 20:16:12 +00:00
lulf
87c9a96183 - Avoid calling the copy constructor when it is not necessary. 2010-07-29 16:06:40 +00:00
lulf
1b486040f0 - Remove unused instance of string. 2010-07-29 16:01:10 +00:00
bcr
3571b845b3 Small typo fix: s/ommited/omitted
PR:             docs/148977
Submitted by:   Warren Block (wblock at wonkity dot com)
MFC after:      4 days
2010-07-27 17:23:40 +00:00
glebius
4261fd06bd Document that the "ngtee" action no longer accepts packet, and
thus don't depend on one_pass flag anymore.

This is a POLA violation, but it is quite difficult to restore
the old behavior with new code. Also, the new behavior matches
behavior of the older "tee" action, and this is more intuitive.
2010-07-27 14:31:39 +00:00
mav
68b26f6649 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
bcr
260d9422b5 Clarify that the "number of bytes per sector"-range in the
-S option is meant to be "inclusive".

The original issue of the PR was already fixed.

PR:                 docs/142418
Submitted by:       David Naylor (naylor dot b dot david at gmail dot com)
No objection from:  kib
MFC after:          5 days
2010-07-25 11:31:29 +00:00
mckusick
e886b3fa85 Note that foreground fsck should be run after a filesystem related panic.
Suggested by:   Mikhail Teterin (mi@)
MFC after:      1 week
2010-07-23 14:35:51 +00:00
ae
fe77546977 Document that SI unit suffixes are supported for -b and -s options
of add verb. Mention about maximum size limit for "freebsd-boot"
partition. It should be smaller than 545 KB (hardcoded in pmbr).
Show usage of SI unit suffixes in example.

Approved by:	mav (mentor)
MFC after:	1 week
2010-07-23 11:00:43 +00:00
mckusick
00c55fe8c7 Note that foreground fsck should be run after a filesystem related panic.
Suggested by:	Mikhail Teterin (mi@)
MFC after:	1 week
2010-07-22 18:33:10 +00:00
pjd
3f34a9652f Actually, only the fullsync mode is implemented, not memsync mode.
Correct manual page.

MFC after:	3 days
2010-07-22 08:30:14 +00:00
luigi
696b5f7a91 better printing of headers when listing flows 2010-07-15 14:34:56 +00:00
mav
129dba6435 Do not bzero() NULL pointer on malloc() error.
Submitted by:	Dmitry Luhtionov
2010-07-14 15:14:00 +00:00
maxim
bd46090239 o Restore missed flag in the synopsis.
PR:		docs/148534
Submitted by:	Warren Block
MFC after:	1 week
2010-07-13 04:30:50 +00:00
maxim
9efd56660c o Add -q flag to usage().
MFC after:	1 week
2010-07-13 04:13:31 +00:00
maxim
cd0eb26f92 o Add -q flag to the synopsis.
PR:		docs/148535
Submitted by:	Warren Block
MFC after:	1 week
2010-07-13 04:11:25 +00:00
brian
66f8be2c3a When dhclient obtains a lease, it runs dhclient-script and expects
it to configure the interface.  When the script is complete, dhclient
monitors the routing socket and will terminate if its address is
deleted or if its interface is removed or brought down.

Because the routing socket is already open when dhclient-script is
run, dhclient ignores address deletions for 10 seconds after the
script was run.

If the address that will be obtained is already configured on the
interface before dhclient starts, and if dhclient-script takes more
than 10 seconds (perhaps due to dhclient-*-hooks latencies), on script
completion, dhclient will immediately and silently exit when it sees
the RTM_DELADDR routing message resulting from the script reassigning
the address to the interface.

This change logs dhclient's reason for exiting and also changes the
10 second timeout to be effective from completion of dhclient-script
rather than from when it was started.

We now ignore RTM_DELADDR and RTM_NEWADDR messages when the message
contains no interface address (which should not happen) rather than
exiting.

Not reviewed by:	brooks (timeout)
MFC after:		3 weeks
2010-07-07 06:06:54 +00:00
jeff
26f5c32321 - Permit zero length directories as a handled inconsistency. This allows
directory truncation to proceed before the link has been cleared.  This
   is accomplished by detecting a directory with no . or .. links and
   clearing the named directory entry in the parent.
 - Add a new function ino_remref() which handles the details of removing
   a reference to an inode as a result of a lost directory.  There were
   some minor errors in various subcases of this routine.
2010-07-06 07:07:29 +00:00
mjacob
7f00128735 Fix the clear function which has been broken for a bit.
MFC after:	1 week
2010-07-04 22:17:56 +00:00
bcr
cae33a9ae0 Let boot(8) refer to the uart(4) serial driver, which is the replacement
for the obsolete sio(4) driver.

PR:             docs/144498
Submitted by:   Bruce Cran (bruce at cran dot org dot uk)
Approved by:    marcel
MFC after:      2 weeks
2010-07-04 20:39:07 +00:00
marcel
df88de4360 sysctlbyname() returns -1 on error and sets errno. It does
not return the error itself.
2010-07-03 22:02:29 +00:00
mav
53dc024639 Correct explanation for idle and standby subcommands' -t argument. 2010-07-01 14:10:55 +00:00
jh
0cae6dc51c - Don't assign the return value from read(2) to a variable of type
int.
- Use errx(3) instead of err(3) to print the error message on short
  reads in readlabel(). errno won't be set on short reads which can
  easily occur here due to the fixed size read request.

PR:		144307
Reviewed by:	bde
2010-06-30 18:34:45 +00:00
imp
93e0327a90 Expand system into my_system, and add the necessary tidyness that we
need.  Close the pidfile.  Then close all descriptors >= 3 to avoid
information leakage to children.

This solves the problem of not being able to restart devd when you
have, for example, a dhclient forked to configure your network...

MFC after:	3 days
2010-06-29 03:52:12 +00:00
delphij
716b58576a Improve fsck robustness for SU+J cases:
- Use err/errx only when the case is really fatal.  For other
   cases, fall back to full fsck instead of quiting fsck.
 - Plug a memory leak.
 - Avoid divide by zero when printing summary.
 - Output "FILE SYSTEM IS MARKED CLEAN" when a successful
   journal recovering is done.
 - When -f is specified, do full fsck instead of journal recovery.
2010-06-22 00:26:07 +00:00
ae
1ae32ded97 Check for overflow before it occurs. Also add check for
negative numbers.

Suggested by:	ache
Approved by:	kib (mentor)
2010-06-21 12:50:54 +00:00
ae
9f1bacec49 Remove G_TYPE_ASCLBA type and replace it with G_TYPE_STRING in gpart.
Move code that converts params from humanized numbers to sectors count
to subr.c and adjust comment.
Add post-processing for "size" and "start offset" params in gpart,
now they are properly converted to sectors count with known sector size
that can be greater that 512 bytes.
Also replace "unsigned long long" type to "off_t" for unify code since
it used for medium size in libgeom(3) and DIOCGMEDIASIZE ioctl.

PR:		bin/146277
Reviewed by:	marcel (previous version)
Approved by:	kib (mentor)
MFC after:	1 month
2010-06-21 08:24:50 +00:00
ed
01e81eb99e Small style fixes:
- ANSIfy prototypes.
- Remove unneeded whitespace.
- Add const keyword to function where it can be used.
2010-06-20 12:52:33 +00:00
brian
f4323232d9 Fix some style(9), although there's a lot more issues here.
Fix some casting errors.

PR:		142384
Submitted by:	giffunip at tutopia dot com
Obtained from:	NetBSD
MFC after:	3 weeks
2010-06-20 09:40:54 +00:00
uqs
a8e27bd6d3 mdoc nitpicking for gsched.8
- remove stray argument [1]
- remove stray whitespace
- use canonical wording for the HISTORY section

PR:		docs/147119 [1]
Submitted by:	Alexander Best <alexbestms@wwu.de> [1]
MFC after:	1 week
2010-06-19 18:52:37 +00:00
brucec
9f6e36d162 Call free and freeaddrinfo before exiting.
PR: bin/144730
PR: bin/144974
Submitted by: Earl R. Lapus <earl.lapus at gmail.com>
Approved by: rrs (mentor)
MFC after: 1 month
2010-06-16 15:49:17 +00:00
pjd
30cb3140ef Correct various log messages.
Submitted by:	Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-06-14 21:46:48 +00:00
pjd
235822ad57 Fix typos.
MFC after:	3 days
2010-06-14 21:44:58 +00:00
pjd
05cedac6b7 Initialize gctl_seq for synchronization requests.
Reported by:	hiroshi@soupacific.com
Analysed by:	Mikolaj Golub <to.my.trociny@gmail.com>
Tested by:	hiroshi@soupacific.com, Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-06-14 21:44:20 +00:00
pjd
8a3620394e Plug memory leak.
Found by:	Coverity Prevent
CID:		7057
MFC after:	3 days
2010-06-14 21:41:22 +00:00
pjd
4d60221630 Plug memory leak.
Found by:	Coverity Prevent
CID:		7056
MFC after:	3 days
2010-06-14 21:37:25 +00:00
pjd
d5bb9ec5ff Plug memory leak.
Found by:	Coverity Prevent
CID:		7051
MFC after:	3 days
2010-06-14 21:33:18 +00:00
pjd
ccd077e269 Plug memory leaks.
Found by:	Coverity Prevent
CID:		7052, 7053, 7054, 7055
MFC after:	3 days
2010-06-14 21:25:20 +00:00
pjd
7824be8be0 Remove macros that are not really needed. The idea was to have them in case
we grow more descriptors, but I'll reconsider readding them once we get there.

Passing (a = b) expression to FD_ISSET() is bad idea, as FD_ISSET() evaluates
its argument twice.

Found by:	Coverity Prevent
CID:		5243
MFC after:	3 days
2010-06-14 21:18:58 +00:00
pjd
e6a1cebf1a Eliminate dead code.
Found by:	Coverity Prevent
CID:		5158
MFC after:	3 days
2010-06-14 21:01:13 +00:00
uqs
972d4b6a91 Remove dead variable assignments
Found by:	clang static analyzer
Verified by:	md5(1)
2010-06-11 17:03:04 +00:00
uqs
392b002279 Initialize variables before usage.
Found by:	clang static analyzer
Found by:	Coverity Prevent[tm] (CID 7736, 7760)
2010-06-11 17:02:57 +00:00
ae
7233caf7de bgeom(3) does strdup of param name.
Don't leak memory when deleting param from gctl_req.

Reviewed by:	marcel
Approved by:	mav (mentor)
MFC after:	2 weeks
2010-06-07 07:41:41 +00:00
marius
37567a7281 - Mention that VTOC8 labels are found in Fujitsu SPARC64 machines as well.
- Add information regarding VTOC8 bootrstrap code and how it's handled with
  r208777 in place.
- Document the mapping of partition types to VTOC8 tags.
- Add examples for VTOC8 to the respective section.
- Eliminated hard sentence breaks.

Reviewed by:	marcel (slightly buggy version)
MFC after:	3 days
2010-06-03 13:04:56 +00:00
marius
2972c267be - In gpart_bootfile_read() fix an off-by-one error preventing the bootstrap
file to be of maximum size.
- Add special handling required for SMI/VTOC8 disklabel partcode, i.e. avoid
  overwriting the label when writing the bootstrap code to the partition
  starting at 0 and install it to all partitions when the -i option is omitted
  just like geom_sunlabel(4) and sunlabel(8) do by default.
- Add missing prototypes.
- Add const where applicable.

Reviewed by:	marcel
MFC after:	3 days
2010-06-03 13:01:55 +00:00
jilles
8d50dfb57f Clarify devfs manpages slightly.
mount(8): add xref to devfs(5)
devfs(5): change example to something more likely to be useful (it is not
necessary to mount a devfs on /dev manually, but for chroots/jails it is
often needed), mention since when devfs is preferred to device nodes on ufs

PR:		146600
MFC after:	2 weeks
2010-05-29 20:24:01 +00:00
uqs
1482da422b mdoc: .Ud has attitude, it takes no argument! 2010-05-27 13:56:40 +00:00
mckusick
a3bdf68993 Add support to background fsck to delete zero-length directories. 2010-05-20 06:05:40 +00:00
uqs
e644199c18 mdoc: consistently spell our email addresses <foo@FreeBSD.org>
Reviewed by:	ru
2010-05-19 08:57:53 +00:00