Don't reduce the width of vector mul if the target doesn't support
SSE2.
The patch is to fix PR30298, which is caused by rL272694. The
solution is to bail out if the target has no SSE2.
Differential Revision: https://reviews.llvm.org/D24288
This fixes building the multimedia/libx264 port on i386.
[AArch64] Return the correct size for TLSDESC_CALLSEQ
The branch relaxation pass is computing the wrong offsets because it assumes
TLSDESC_CALLSEQ eats up 4 bytes, when in fact it is lowered to an instruction
sequence taking up 16 bytes. This can become a problem in huge files with lots
of TLS accesses, as it may slowly move branch targets out of the range computed
by the branch relaxation pass.
Fixes PR24234 https://llvm.org/bugs/show_bug.cgi?id=24234
Differential Revision: https://reviews.llvm.org/D22870
This fixes "error in backend: fixup value out of range" when compiling
the misc/talkfilters port for AArch64.
Reported by: sbruno
PR: 201762
MFC after: 3 days
positive diagnostics from -Wvarargs about enum parameters, e.g.:
cddl/contrib/opensolaris/lib/libnvpair/libnvpair.c:388:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior
[-Werror,-Wvarargs]
va_start(ap, which);
^
cddl/contrib/opensolaris/lib/libnvpair/libnvpair.c:382:66: note: parameter of type 'enum nvlist_prtctl_fmt' is declared here
nvlist_prtctl_dofmt(nvlist_prtctl_t pctl, enum nvlist_prtctl_fmt which, ...)
^
Fix for pr24346: arm asm label calculation error in sub
Some ARM instructions encode 32-bit immediates as a 8-bit integer
(0-255) and a 4-bit rotation (0-30, even) in its least significant 12
bits. The original fixup, FK_Data_4, patches the instruction by the
value bit-to-bit, regardless of the encoding. For example, assuming
the label L1 and L2 are 0x0 and 0x104 respectively, the following
instruction:
add r0, r0, #(L2 - L1) ; expects 0x104, i.e., 260
would be assembled to the following, which adds 1 to r0, instead of
260:
e2800104 add r0, r0, #4, 2 ; equivalently 1
The new fixup kind fixup_arm_mod_imm takes care of the encoding:
e2800f41 add r0, r0, #260
Patch by Ting-Yuan Huang!
This fixes label calculation for ARM assembly, and is needed to enable
ARM assembly sources for OpenSSL.
Requested by: jkim
MFC after: 3 days
[X86] AMD Bobcat CPU (btver1) doesn't support XSAVE
btver1 is a SSSE3/SSE4a only CPU - it doesn't have AVX and doesn't
support XSAVE.
Differential Revision: http://reviews.llvm.org/D17682
Pull in r262782 from upstream llvm trunk (by Simon Pilgrim):
[X86] AMD Bobcat CPU (btver1) doesn't support XSAVE
btver1 is a SSSE3/SSE4a only CPU - it doesn't have AVX and doesn't
support XSAVE.
Differential Revision: http://reviews.llvm.org/D17683
This ensures clang does not emit AVX instructions for CPUTYPE=btver1.
Reported by: Michel Depeige <demik+freebsd@lostwave.net>
PR: 211864
MFC after: 3 days
_Unwind_Exception is required to be double word aligned. GCC has
interpreted this to mean "use the maximum useful alignment for the
target" so follow that lead.
Obtained from: LLVM review D22543
FreeBSD uses LLVM's libunwind on FreeBSD/arm64 today (and we expect to
use it more widely in the future) and it requires the EH frame segment
in static binaries.
Reviewed by: dim
Obtained from: Clang commit r266123
MFC after: 3 days
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7250
For historical reasons Darwin/i386 has ebp and esp swapped in the
eh_frame register numbering. That is:
Darwin Other
Reg # eh_frame eh_frame DWARF
===== ======== ======== =====
4 ebp esp esp
5 esp ebp ebp
Although the UNW_X86_* constants are not supposed to be coupled to
DWARF / eh_frame numbering they are currently conflated in LLVM
libunwind, and thus we require the non-Darwin numbering.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This may be reworked upstream but in the interim should address the
stack usage issue reported in the PR.
PR: 206384
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The key improvement is that it may be built without cross-unwinding
support, which significantly reduces the stack space requirement.
MFC after: 1 week
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7123
Only attempt to detect AVG if SSE2 is available
Summary:
In PR29973 Sanjay Patel reported an assertion failure when a certain
loop was optimized, for a target without SSE2 support. It turned out
this was because of the AVG pattern detection introduced in rL253952.
Prevent the assertion failure by bailing out early in
`detectAVGPattern()`, if the target does not support SSE2.
Also add a minimized test case.
Reviewers: congh, eli.friedman, spatel
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D20905
This should fix assertion failures ("Requires at least SSE2!") when
building the games/0ad port with CPUTYPE=pentium3.
Reported by: madpilot
[VectorUtils] Fix nasty use-after-free
In truncateToMinimalBitwidths() we were RAUW'ing an instruction then
erasing it. However, that intruction could be cached in the map we're
iterating over. The first check is "I->use_empty()" which in most
cases would return true, as the (deleted) object was RAUW'd first so
would have zero use count. However in some cases the object could
have been polluted or written over and this wouldn't be the case.
Also it makes valgrind, asan and traditionalists who don't like their
compiler to crash sad.
No testcase as there are no externally visible symptoms apart from a
crash if the stars align.
Fixes PR26509.
This should fix crashes when building a number of ports on arm64.
Reported by: andrew
Make __FreeBSD_cc_version predefined macro configurable at build time
The `FreeBSDTargetInfo` class has always set the `__FreeBSD_cc_version`
predefined macro to a rather static value, calculated from the major OS
version.
In the FreeBSD base system, we will start incrementing the value of this
macro whenever we make any signifant change to clang, so we need a way
to configure the macro's value at build time.
Use `FREEBSD_CC_VERSION` for this, which we can define in the FreeBSD
build system using either the `-D` command line option, or an include
file. Stock builds will keep the earlier value.
Differential Revision: http://reviews.llvm.org/D20037
Follow-up commits will start using the __FreeBSD_cc_version to determine
whether a bootstrap compiler has to be built during buildworld.
Pass dwarf-version to cc1as.
Fix PR26999 - crashing in cc1as with any '*bsd' target.
This should fix possible crashes when using -g in combination with
-save-temps.
[X86] Emit a proper ADJCALLSTACKDOWN in EmitLoweredTLSAddr
We forgot to add the second machine operand to our ADJCALLSTACKDOWN,
resulting in crashes in PEI.
This fixes PR27071.
This should fix an assertion failure during buildworld, when using -Os,
and targeting either i386 directly, or building the 32-bit libraries on
amd64.
Reported by: Eric Camachat <eric.camachat@gmail.com>
Add <atomic> to ThreadPool.h, since std::atomic is used
Summary:
Apparently, when compiling with gcc 5.3.2 for powerpc64, the order of
headers is such that it gets an error about std::atomic<> use in
ThreadPool.h, since this header is not included explicitly. See also:
https://llvm.org/bugs/show_bug.cgi?id=27058
Fix this by including <atomic>. Patch by Bryan Drewery.
Reviewers: chandlerc, joker.eph
Subscribers: bdrewery, llvm-commits
Differential Revision: http://reviews.llvm.org/D18460
the safe point to insert the prologue and epilogue of the function) on
X86. This prevents problems with some functions using TLS, such as in
jemalloc, and which was the cause for Address Sanitizer crashes. The
correct fix is still being discussed upstream.
