Commit Graph

30 Commits

Author SHA1 Message Date
jhb
00a2480413 - Use callout_init_mtx() instead of callout_init(..., CALLOUT_MPSAFE).
- Add a missing callout_drain() to detach.
- Hook into the stats timer and use that to drive the transmit watchdog
  instead of using if_watchdog.
- Run the stats timer every second to match other drivers instead of every
  other second.
- Remove dubious callout handling that stopped the timer only to start it
  again while holding the driver lock without dropping it in between the
  stop and the start.
2009-11-19 18:37:55 +00:00
jhb
711ffd5555 Use device_printf() and if_printf() instead of printf() with an explicit
unit number and remove 'unit' members from softc.
2009-11-06 14:52:37 +00:00
rwatson
be5740a255 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
attilio
b523608331 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
imp
1d666bd7fe The module name convention is foo, not if_foo. 2009-05-15 17:02:11 +00:00
csjp
17dc3a8d0b Catch up the rest of the drivers with the ether_vlan_mtap modifications.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.

It should be noted that this is compiled tested only.

MFC after:	3 weeks
2007-03-04 03:38:08 +00:00
piso
6a2ffa86e5 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
andre
2d9e7e4a32 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
yar
209e4786e7 Commit the results of the typo hunt by Darren Pilgrim.
This change affects documentation and comments only,
no real code involved.

PR:		misc/101245
Submitted by:	Darren Pilgrim <darren pilgrim bitfreak org>
Tested by:	md5(1)
MFC after:	1 week
2006-08-04 07:56:35 +00:00
phk
ef310efff8 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
glebius
175e16aa4d - Fix VLAN_INPUT_TAG() macro, so that it doesn't touch mtag in
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
  incorrectly in almost all drivers. Indicate failure with
  mbuf value of NULL.

In collaboration with:	yongari, ru, sam
2005-12-18 18:24:27 +00:00
ru
f70f525b49 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
glebius
9efbae40b7 - Don't pollute opt_global.h with DEVICE_POLLING and introduce
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
  can be compiled as loadable modules.

Reviewed by:	bde
2005-10-05 10:09:17 +00:00
glebius
f41a83bf42 Big polling(4) cleanup.
o Axe poll in trap.

o Axe IFF_POLLING flag from if_flags.

o Rework revision 1.21 (Giant removal), in such a way that
  poll_mtx is not dropped during call to polling handler.
  This fixes problem with idle polling.

o Make registration and deregistration from polling in a
  functional way, insted of next tick/interrupt.

o Obsolete kern.polling.enable. Polling is turned on/off
  with ifconfig.

Detailed kern_poll.c changes:
  - Remove polling handler flags, introduced in 1.21. The are not
    needed now.
  - Forget and do not check if_flags, if_capenable and if_drv_flags.
  - Call all registered polling handlers unconditionally.
  - Do not drop poll_mtx, when entering polling handlers.
  - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
  - In netisr_poll() axe the block, where polling code asks drivers
    to unregister.
  - In netisr_poll() and ether_poll() do polling always, if any
    handlers are present.
  - In ether_poll_[de]register() remove a lot of error hiding code. Assert
    that arguments are correct, instead.
  - In ether_poll_[de]register() use standard return values in case of
    error or success.
  - Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
    poll_switch() goes through interface list and enabled/disables polling.
    A message that kern.polling.enable is deprecated is printed.

Detailed driver changes:
  - On attach driver announces IFCAP_POLLING in if_capabilities, but
    not in if_capenable.
  - On detach driver calls ether_poll_deregister() if polling is enabled.
  - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
    flag. If there is no, then unlocks and returns.
  - In ioctl handler driver checks for IFCAP_POLLING flag requested to
    be set or cleared. Driver first calls ether_poll_[de]register(), then
    obtains driver lock and [dis/en]ables interrupts.
  - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
    If present, then returns.This is important to protect from spurious
    interrupts.

Reviewed by:	ru, sam, jhb
2005-10-01 18:56:19 +00:00
mlaier
a42af632d8 Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.

Discussed on:	-arch
Reviewed by:	thompsa
X-MFC-after:	never (RELENG_6 as transition period)
2005-09-27 18:10:43 +00:00
imp
4e70215e6b Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
rwatson
5d770a09e8 Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
rwatson
9918d13b80 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
brueffer
e2f34ef2a9 - add missing ether_poll_deregister
- add per-device polling
- move the setting of if_capenable further down so that the
  VLAN caps are honored as well

Approved by:	ru
MFC after:	2 weeks
2005-08-02 09:27:42 +00:00
brooks
567ba9b00a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
alc
938caf641a Convert to the faster bus_dmamap_load_mbuf_sg() interface.
MFC after: 1 week
2005-05-18 07:45:08 +00:00
alc
1e3e9d828b Add locking and enable INTR_MPSAFE. Eliminate spl calls.
Submitted by: Paul Willmann willmann at rice dot edu
MFC After: 3 weeks
2005-04-05 05:05:29 +00:00
mux
ea7780ea41 Fix copy&paste error in my previous commit.
Spotted by:	ru
2005-03-27 17:22:41 +00:00
mux
c8f1495d8b Fix a bunch of bugs I came accross when looking at the ixgb(4) driver,
some of which are rather serious:
- Use the device sysctl tree instead of rolling our own.
- Don't create a bus_dmamap_t to pass to bus_dmamem_alloc(), it is
  bus_dmamem_alloc() that creates it itself.  The DMA map created
  by the driver was overwritten and its memory was leaked.
- Fix resource handling bugs in the error path of ixgb_dma_alloc().
- Don't use vtophys() to get the base address of the TX and RX rings
  when busdma already gave us the correct address to use!
- Remove now useless includes and the alpha_XXX_dmamap() hack.
- Don't initialize if_output to ether_output(), ether_ifattach() does
  it for us already.
- Add proper module dependencies on ether and pci.

Unfortunately, I'm not lucky enough to own an ixgb(4) card, nor a
machine with a bus where to plug it in and I couldn't find anyone able
to test these patches, so they are only build-tested and I won't MFC
them for 5.4-RELEASE.
2005-03-27 16:38:08 +00:00
imp
5536442ca3 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:17:35 +00:00
imp
4b319958e7 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
rwatson
b43940bbb9 Since if_ixgb doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-14 00:17:04 +00:00
tackerman
266fbe3791 PR kern/68474:
Changed if_ipending to if_flags
2004-07-01 22:37:47 +00:00
phk
9db9f1379c Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
tackerman
1f34a7cd39 First release of ixgb driver for the Intel(R) PRO/10GbE Family of Adapters. This driver has
been developed for use with FreeBSD, version 4.8 and later.

Submitted by:	Hema Joyce
Reviewed by: 	Prafulla Deuskar
Approved by: 	Prafulla Deuskar
MFC after:	1 week
2004-05-28 00:23:00 +00:00