The "-z" option on nfsstats was erroneously zeroing out the counts
of NFSv4 state structures. These counts will normally go back down
to zero as state is released. When zeroed out by "-z", these counts
can go negative. This patch fixes this problem.
MFC after: 2 weeks
MPC750 User Manual Errata (rev 1) adds a note to C.4.2.2 noting that mtsr,
mtsrin, and mtmsr all require a isync after the instruction and before data
address translation uses any of the segment registers. This should make FreeBSD
run correctly on the G3 again.
Reported by: Mark Millard
MFC after: 1 week
MAXPAGESIZE is not well defined by the GNU ld documentation.
Different linkers, and different versions of the same linker, use
different MAXPAGESIZE values. Current versions of GNU gold and LLVM's
lld use 4K. When set to 4K the kernel panics at boot due to an issue
with x86bios.
Here we want the kernel physaddr to be the amd64 superpage size, so use
that value (2MB) explicitly. With this change GNU gold and LLVM lld can
link a working amd64 kernel.
PR: 214718 (x86bios)
Differential Revision: https://reviews.freebsd.org/D8610
[PowerPC] Refactor soft-float support, and enable PPC64 soft float
This change enables soft-float for PowerPC64, and also makes
soft-float disable all vector instruction sets for both 32-bit and
64-bit modes. This latter part is necessary because the PPC backend
canonicalizes many Altivec vector types to floating-point types, and
so soft-float breaks scalarization support for many operations. Both
for embedded targets and for operating-system kernels desiring
soft-float support, it seems reasonable that disabling hardware
floating-point also disables vector instructions (embedded targets
without hardware floating point support are unlikely to have Altivec,
etc. and operating system kernels desiring not to use floating-point
registers to lower syscall cost are unlikely to want to use vector
registers either). If someone needs this to work, we'll need to
change the fact that we promote many Altivec operations to act on
v4f32. To make it possible to disable Altivec when soft-float is
enabled, hardware floating-point support needs to be expressed as a
positive feature, like the others, and not a negative feature,
because target features cannot have dependencies on the disabling of
some other feature. So +soft-float has now become -hard-float.
Fixes PR26970.
Pull in r283061 from upstream clang trunk (by Hal Finkel):
[PowerPC] Enable soft-float for PPC64, and +soft-float -> -hard-float
Enable soft-float support on PPC64, as the backend now supports it.
Also, the backend now uses -hard-float instead of +soft-float, so set
the target features accordingly.
Fixes PR26970.
Reported by: Mark Millard
PR: 214433
The callout subsystem already handles early callouts and schedules
the first clock interrupt appropriately based on the currently pending
callouts. The one nit to fix was that callouts scheduled via C_HARDCLOCK
during early boot could fire too early once timers were enabled as the
per-CPU base time is always zero until timers are initialized. The change
in callout_when() handles this case by using the current uptime as the
base time of the callout during bootup if the per-CPU base time is zero.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
[PPC] Set SP after loading data from stack frame, if no red zone is
present
Follow-up to r280705: Make sure that the SP is only restored after
all data is loaded from the stack frame, if there is no red zone.
This completes the fix for
https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24466
Reported by: Mark Millard
PR: 214433
Since the previous algorithm, based on bit shifting, does not scale
with large replay windows, the algorithm used here is based on
RFC 6479: IPsec Anti-Replay Algorithm without Bit Shifting.
The replay window will be fast to be updated, but will cost as many bits
in RAM as its size.
The previous implementation did not provide a lock on the replay window,
which may lead to replay issues.
Reviewed by: ae
Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8468
we see a lot of contention on the arc4 lock, used to generate the IV
of the ESP output packets.
The idea of this patch is to split this mutex in order to reduce the
contention on this lock.
Reviewed by: delphij, markm, ache
Approved by: so
Obtained from: emeric.poupon@stormshield.eu
MFC after: 1 month
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8130
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
So that the caller can know the channel close error and react accordingly.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8600
So that the callers of vmbus_chan_open_br() could handle the passed in
bufring memory properly.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8569
vmbus_pcib requires NEW_PCIB, but in case that's not defined, we at
least shouldn't break build.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 3 days
Sponsored by: Microsoft
writev() can do a short write. Retrying it results in a very convoluted
and complex code, so we iterate over iovec and do regular stream_write()
instead.
Approved by: trasz
Sponsored by: iXsystems, Inc.
Queues that do not need interrupts - for instance, output queues - do
not have a corresponding entry in vtpci_msix_vq_interrupts.
So, it was wrong to increment a pointer into that array when iterating
over such a queue.
I ran into this bug while trying to use virtio_console(4) that allocates
a lot of queues with every other being an output queue without an
interrupt handler (if MultiplePorts feature is negotiated).
MFC after: 2 weeks
r309017 removed two fields from struct vmmeter, which is embedded in struct
pcpu. This caused the struct size to change, triggering the CTASSERT in
sys/pcpu.h. Add the extra 8 bytes back in as padding.
Adds VLAN and port management abilities for etherswitchcfg(8).
The code is conditionally enabled for now, because it is not necessary on
single ethernet use cases.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
illumos/illumos-gate@90f2c094b390f2c094b3https://www.illumos.org/issues/7181
zfsvfs_setup() is called in both zfs_mount and zfs_resume_fs paths.
dmu_objset_set_user(zfsvfs->z_os, zfsvfs) is called early in zfsvfs_setup()
before the setup is actually completed,
thus an under-constructed zfsvfs becomes visible.
Additionally, there is nothing to serialize the two call paths. As a result two
threads can step on each other's toes.
assertion failed: zilog->zl_clean_taskq == NULL, file:
../../common/fs/zfs/zil.c, line: 1772
> $c
vpanic()
0xfffffffffbdf6928()
zil_open+0x45(ffffff1bbc5dd000, fffffffff7993880)
zfsvfs_setup+0x84(ffffffb378d77000, 0)
zfs_resume_fs+0x132(ffffffb378d77000, ffffffb37ddcf000)
zfs_ioc_rollback+0x96(ffffffb37ddcf000, ffffff01dcdc4cd0, ffffff01aa091000)
zfsdev_ioctl+0x215(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
cdev_ioctl+0x39(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
spec_ioctl+0x60(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
fop_ioctl+0x55(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
ioctl+0x9b(7, 5a19, 80465f8)
sys_syscall32+0x1f7()
> ffffff1bbc5dd000::print objset_t os_zil
os_zil = 0xffffff1c053cf7c0
> 0xffffff1c053cf7c0::print zilog_t zl_clean_taskq
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks
already free blocks
7199 dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
illumos/illumos-gate@bfaed0b91ebfaed0b91ehttps://www.illumos.org/issues/7199
dsl_dataset_rollback_sync may try to free already freed blocks when it calls
dsl_destroy_head_sync_impl to destroy a temporary clone.
That happens if a snapshot to which we are rolling back and from which the
clone is created has some ZIL records.
https://www.illumos.org/issues/7200
No new blocks must be born in a dataset in the same TXG after a snapshot of the
dataset is taken.
Those blocks would have the same blk_birth as the dataset's ds_prev_snap_txg
and as such they would be presumed to belong o the snapshot while in fact they
do not.
All the datasets must be clean before sync tasks are run, so the described
scenario may happen only if one of the sync tasks dirties the dataset and
another sync task takes its snapshot.
Then, there will be another sync pass because of the dirty data and the new
blocks will be born in the same TXG when the data is written out.
It seems that almost all of the existing sync tasks modify only MOS and do not
dirty any objsets.
The only exception that I've been able to identify so far is the rollback which
can modify an objset when it zeroes out the objset's ZIL.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 3 weeks
and zfs_ioc_rename
illumos/illumos-gate@690041b9ca690041b9cahttps://www.illumos.org/issues/7180
If a filesystem is not unmounted while the rename is being performed, then, for
example, a concurrect zfs rollback may call zfs_suspend_fs followed by
zfs_resume_fs on the same filesystem.
The latter takes the filesystem's name as an argument. If the filesystem name
changes as a result of the rename, then dmu_objset_hold(osname, zfsvfs, &os)
call in zfs_resume_fs would fail resulting in a kernel panic.
So far I have been able to reproduce this problem on FreeBSD where zfs rename
has -u option that skips the unmounting before doing the renaming.
But I think that in theory the same problem can occur on illumos as well,
because the unmounting is done in userland before invoking the rename ioctl and
there could be a race with, e.g., zfs mount.
panic: solaris assert: dmu_objset_hold(osname, zfsvfs, &zfsvfs->z_os) == 0 (0x2
== 0x0), file: /usr/devel/svn/head/sys/cddl/contrib/opensolaris/uts/common/fs/
zfs/zfs_vfsops.c, line: 2210
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004df30710
vpanic() at vpanic+0x182/frame 0xfffffe004df30790
panic() at panic+0x43/frame 0xfffffe004df307f0
assfail3() at assfail3+0x2c/frame 0xfffffe004df30810
zfs_resume_fs() at zfs_resume_fs+0xb9/frame 0xfffffe004df30860
zfs_ioc_rollback() at zfs_ioc_rollback+0x61/frame 0xfffffe004df308a0
zfsdev_ioctl() at zfsdev_ioctl+0x65c/frame 0xfffffe004df30940
devfs_ioctl_f() at devfs_ioctl_f+0x156/frame 0xfffffe004df309a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe004df30a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe004df30ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe004df30bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe004df30bf0
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 2 weeks
~/nsmb.conf, as erroneously introduced by r214387, is never used. Fix the man
page to specify that ~/.nsmbrc is used instead.
PR: 210652
Submitted by: ganael.laplanche@corp.ovh.com
Approved by: gjb (doceng@)
Zero can be confused for a potentially valid value.
For example, if I load and unload sbp driver I get a lot of messages
like the following:
fw_tl_free: the xfer is not in the queue (tlabel=0, flag=0x0)
send: dst=0x00 tl=0x00 rt=0 tcode=0x0 pri=0x0 src=0x000
recv: dst=0x01 tl=0x21 rt=1 tcode=0x1 pri=0x0 src=0xffc0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe04464407e0
fw_tl_free() at fw_tl_free+0x18d/frame 0xfffffe0446440820
fw_xfer_unload() at fw_xfer_unload+0xca/frame 0xfffffe0446440840
fw_xferlist_remove() at fw_xferlist_remove+0x2f/frame 0xfffffe0446440870
sbp_detach() at sbp_detach+0x1e0/frame 0xfffffe04464408e0
device_detach() at device_detach+0x80/frame 0xfffffe0446440900
devclass_driver_deleted() at devclass_driver_deleted+0x6a/frame 0xfffffe0446440940
devclass_delete_driver() at devclass_delete_driver+0x7d/frame 0xfffffe0446440980
driver_module_handler() at driver_module_handler+0xff/frame 0xfffffe04464409d0
module_unload() at module_unload+0x32/frame 0xfffffe04464409f0
linker_file_unload() at linker_file_unload+0x24b/frame 0xfffffe0446440a40
kern_kldunload() at kern_kldunload+0xbc/frame 0xfffffe0446440a70
amd64_syscall() at amd64_syscall+0x314/frame 0xfffffe0446440bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0446440bf0
MFC after: 2 weeks
Please see section 5.15 of 1394 OHCI Specification.
If the register is not implemented, then the physical response unit is
limited to the first 4GB of the physical memory.
In that case the non-cooperative debugging over firewire (using /dev/fwmem)
can not be expected to work if a target has more RAM than that.
The method is described in gdb.4 and the Developer's Handbook.
It seems that most of the consumer hardware does not implement
PhysicalUpperBound register.
MFC after: 1 week
It was very wrong to look at the vnode and znode internals without
having locked the vnode first.
Reported by: pho
Tested by: pho
MFC after: 1 week
X-MFC with: r308887
