and use a loop so that multiple cache commands can be strung together on
the command line into a single update to the volume's properties.
Reviewed by: bz
Approved by: re (kib)
MFC after: 1 week
This follows what the output of make targets looks like, and reduces the
number of directories needed on the FTP server, since we now have only one
architecture with multiple machine types (i386, which has i386 and pc98),
but 3 machines with 9 architectures between them (powerpc, mips, and arm).
Requested by: kensmith, bz
Approved by: re(kensmith)
new line after the pd state information as well, so move it to the outside
of the block.
Submitted by: Mark Johnston at Sandvine Inc
MFC atfer: 3 days
Approved by: re (kib)
o cd9960 -> cd9660
o Move inclusion of sys/endian.h from cd9660_eltorito.c to cd9660.h
since actual user is not cd9660_eltorito.c but iso.h and
cd9660_eltorito.h.
Actually, include order/place of sys/endian.h doesn't matter on
netbsd since it is always included by sys/types.h but it's not
true on other system. This should fix cross build breakage on
freebsd introduced by rev. 1.16 of cd9660_eltorito.c.
Problem reported and fix suggested on twitter.
o Fix fd leaks in error cases. Found by cppcheck.
o RRIP RE length should be 4, not 0
o Apply fixes for PR bin/44114 (makefs(8) -t cd9660 -o rockridge creates
corrupted cd9660fs), iso9660_rrip.c part:
- cd9660_rrip_finalize_node() should check rr_real_parent in node->parent,
not in node itself in RRIP_PL case
- cd9660_rrip_initialize_node() should update only node passed as arg
so handle RRIP_PL in DOTDOT case
Fixes malformed dotdot entries in deep (more than 8 level) directories
moved into .rr_moved dir.
Should be pulled up to netbsd-5.
(no official ISO has such deep dirs, but cobalt restorecd is affected)
Reviewed by: mm
Approved by: re (kib)
Obtained from: NetBSD
MFC after: 3 days
In -p mode install the group file with the same permissions as normally
done in etc/Makefile.
Update the copyright.
Requested by: peter [1]
Approved by: re (kib)
ints. That fixes a first bug where pmcstat wasn't using the old
cpumask_t interface and now also brings the full support for more
than 32 cpus.
While here, make the functions pmcstat_clone_event_descriptor() and
pmcstat_get_cpumask() private to pmcstat.
The problem of assuming cpu dense masks still persists and should be
eventually fixed, as reported by avg.
Tested by: pluknet
Reviewed by: gnn
Approved by: re (kib)
makefs with -t cd9660 -o rockridge against directories with
deep structure creates a corrupted cd9660 image.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=44114
Fix NetBSD PR bin/45217:
makefs creates ISO9660 images that violate the ECMA-119 (ISO9660)
specification. This is caused by erroneously writing 32 bytes
with value 0x20 to the volume_set_id field and 128 bytes with value 0x20
to the the following 37-byte fields in the PVD:
copyright_file_id, abstract_file_id, bibliographic_file_id
This causes, among other unwanted results the reserved4 field to be
overwritten with the value 0x20. To comply with the specification,
this field muse be zero. As a result, all FreeBSD distribution
images created with makefs have not been 100% valid ISO9660 files.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=45217
Reviewed by: kientzle
Approved by: re (kib)
Obtained from: NetBSD
MFC after: 3 days
historic behavior (create the default base directory in pw.conf) before
I came up with a better fix for this.
Requested by: nwhitehorn
Approved by: re (kib)
data when 'show drives' succeeds, often resulting in a failing exit code
even though the command worked fine.
Reviewed by: bz
Approved by: re (kib)
MFC after: 3 days
recommended to allow root users in the jail to access the host system.
PR: docs/156853
Submitted by: crees
Patch by: crees
Approved by: re (kib) for BETA1
you were stuck in an endless loop.
Reported by: kensmith
Approved by: re (kib) for BETA1
Pointy hat to: bz - wonder why I had not tested legacy IP thoroughly..
added/removed interfaces in a more consistent manner and reloading the
configuration file.
- Implement burst unsolicited RA sending into the internal RA timer framework
when AdvSendAdvertisements and/or configuration entries are changed as
described in RFC 4861 6.2.4. This fixes issues that make termination of the
rtadvd(8) daemon take very long time.
An interface now has three internal states, UNCONFIGURED, TRANSITIVE, or
CONFIGURED, and the burst unsolicited sending happens in TRANSITIVE.
See rtadvd.h for the details.
- rtadvd(8) now accepts non-existent interfaces as well in the command line.
- Add control socket support and rtadvctl(8) utility to show the RA information
in rtadvd(8). Dumping by SIGUSR1 has been removed in favor of it.
This includes a structural change regarding atomic ops. Previously they
were enabled on all platforms unless we had knowledge that they did not
work. However both work performed by marius@ on sparc64 and the fact that
the 9.8.x branch is fussier in this area has demonstrated that this is
not a safe approach. So I've modified a patch provided by marius to
enable them for i386, amd64, and ia64 only.
added/removed interfaces in a more consistent manner and reloading
the configuration file.
- Add initial support for control socket. RA information in the
daemon can be obtained by rtadvctl(8) instead of SIGUSR1 in a similar
manner to ifconfig(8). The information dump has been removed in favor of it.
(reload the configuration file)
# rtadvctl reload
(show RA messages being sent on each interfaces)
# rtadvctl show
em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
DefaultLifetime: 30m
MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
AdvLinkMTU: <none>, Flags: O, Preference: medium
ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
AdvIfPrefixes: yes
(show RA messages being sent only on em0)
# rtadvctl show em0
(rtadvctl -v show provides additional information)
# rtadvctl -v show em0
em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
DefaultLifetime: 30m
MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
AdvLinkMTU: <none>, Flags: O, Preference: medium
ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
AdvIfPrefixes: yes
Prefixes (1):
2001:db8:1::/64 (CONFIG, vltime=30d, pltime=7d, flags=LA)
RDNSS entries:
2001:db8:1::128 (ltime=2m40s)
(stop rtadvd)
# rtadvctl shutdown
A remaining issue when reloading the configuration file is that
during that period rtadvd cannot communicate with rtadvctl due to some
additional RA sending for graceful shutdown. This will be fixed later.
last byte of the buffer.
Since we call refresh_device_tbl() for any devctl event types - no need
to check the first byte of buffer. Remove these checks.
Also remove logging for the case of unknown devd message. It incorrectly
triggers when all devctl events are not fit into one buffer and part of
unread data will be read in the next pass.
When length of data readed from devctl is equal to sizeof(buf), then try
to read from socket again, to read full data.
MFC after: 2 weeks
the normal distfile mechanism. Thanks to Marc Fonvieille for the patch and
for putting up with me taking entirely too long to commit this!
Submitted by: blackend
was incrementing it twice making it impossible to iterate the table
since the records were 1, 3, 5, 7 (or 2, 4, 6, 8 for the v3 records).
MFC after: 10 days
- Use strlen(dp->d_name) instead of the unportable dp->d_namlen. Rename
i to len to make it slightly more descriptive and prevent negative
indexing of the array.
- Replace index() by strchr().
This supposedly fixes compilation on GNU systems.
Submitted by: Robert Millan <rmh debian org> (original patch)
MFC after: 3 weeks
