down state.
Regression appeared in r287789, where the "prefix has no corresponding
installed route" case was forgotten. Additionally, lltable_delete_addr()
was called with incorrect byte order (default is network for lltable code).
While here, improve comments on given cases and byte order.
PR: 203573
Submitted by: phk
instead of old "ignore-and-return 0" in r287789. This broke arp -da /
ndp -cn behavior (they exit on rtsock command failure). Fix this by
translating LLE_IFADDR to RTM_PINNED flag, passing it to userland and
making arp/ndp ignore these entries in batched delete.
MFC after: 2 weeks
* prepare gateway before insertion
* use RTM_CHANGE instead of explicit find/change route
* Remove fib argument from ifa_switch_loopback_route added in r264887:
if old ifp fib differes from new one, that the caller
is doing something wrong
* Make ifa_*_loopback_route call single ifa_maintain_loopback_route().
without holding afdata wlock
* convert per-af delete_address callback to global lltable_delete_entry() and
more low-level "delete this lle" per-af callback
* fix some bugs/inconsistencies in IPv4/IPv6 ifscrub procedures
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3573
Before that, the logic besides lle_create() was the following:
return existing if found, create if not. This behaviour was error-prone
since we had to deal with 'sudden' static<>dynamic lle changes.
This commit fixes bunch of different issues like:
- refcount leak when lle is converted to static.
Simple check case:
console 1:
while true;
do for i in `arp -an|awk '$4~/incomp/{print$2}'|tr -d '()'`;
do arp -s $i 00:22:44:66:88:00 ; arp -d $i;
done;
done
console 2:
ping -f any-dead-host-in-L2
console 3:
# watch for memory consumption:
vmstat -m | awk '$1~/lltable/{print$2}'
- possible problems in arptimer() / nd6_timer() when dropping/reacquiring
lock.
New logic explicitly handles use-or-create cases in every lla_create
user. Basically, most of the changes are purely mechanical. However,
we explicitly avoid using existing lle's for interface/static LLE records.
* While here, call lle_event handlers on all real table lle change.
* Create lltable_free_entry() calling existing per-lltable
lle_free_t callback for entry deletion
This permits us having all (not fully true yet) all the info
needed in lookup process in first 64 bytes of 'struct llentry'.
struct llentry layout:
BEFORE:
[rwlock .. state .. state .. MAC ] (lle+1) [sockaddr_in[6]]
AFTER
[ in[6]_addr MAC .. state .. rwlock ]
Currently, address part of struct llentry has only 16 bytes for the key.
However, lltable does not restrict any custom lltable consumers with long
keys use the previous approach (store key at (lle+1)).
Sponsored by: Yandex LLC
* Split lltable_init() into lltable_allocate_htbl() (alloc
hash table with default callbacks) and lltable_link() (
links any lltable to the list).
* Switch from LLTBL_HASHTBL_SIZE to per-lltable hash size field.
* Move lltable setup to separate functions in in[6]_domifattach.
differences between projects/routing and HEAD.
This commit tries to keep code logic the same while changing underlying
code to use unified callbacks.
* Add llt_foreach_entry method to traverse all entries in given llt
* Add llt_dump_entry method to export particular lle entry in sysctl/rtsock
format (code is not indented properly to minimize diff). Will be fixed
in the next commits.
* Add llt_link_entry/llt_unlink_entry methods to link/unlink particular lle.
* Add llt_fill_sa_entry method to export address in the lle to sockaddr
format.
* Add llt_hash method to use in generic hash table support code.
* Add llt_free_entry method which is used in llt_prefix_free code.
* Prepare for fine-grained locking by separating lle unlink and deletion in
lltable_free() and lltable_prefix_free().
* Provide lltable_get<ifp|af>() functions to reduce direct 'struct lltable'
access by external callers.
* Remove @llt agrument from lle_free() lle callback since it was unused.
* Temporarily add L3_CADDR() macro for 'const' sockaddr typecasting.
* Switch to per-af hashing code.
* Rename LLE_FREE_LOCKED() callback from in[6]_lltable_free() to
in_[6]lltable_destroy() to avoid clashing with llt_free_entry() method.
Update description from these functions.
* Use unified lltable_free_entry() function instead of per-af one.
Reviewed by: ae
* Move lle creation/deletion from lla_lookup to separate functions:
lla_lookup(LLE_CREATE) -> lla_create
lla_lookup(LLE_DELETE) -> lla_delete
lla_create now returns with LLE_EXCLUSIVE lock for lle.
* Provide typedefs for new/existing lltable callbacks.
Reviewed by: ae
Both are used to protect access to IP addresses lists and they can be
acquired for reading several times per packet. To reduce lock contention
it is better to use rmlock here.
Reviewed by: gnn (previous version)
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3149
and arp were being used. They basically would pass in the
mutex to the callout_init. Because they used this method
to the callout system, it was possible to "stop" the callout.
When flushing the table and you stopped the running callout, the
callout_stop code would return 1 indicating that it was going
to stop the callout (that was about to run on the callout_wheel blocked
by the function calling the stop). Now when 1 was returned, it would
lower the reference count one extra time for the stopped timer, then
a few lines later delete the memory. Of course the callout_wheel was
stuck in the lock code and would then crash since it was accessing
freed memory. By using callout_init(c, 1) we always get a 0 back
and the reference counting bug does not rear its head. We do have
to make a few adjustments to the callouts themselves though to make
sure it does the proper thing if rescheduled as well as gets the lock.
Commented upon by hiren and sbruno
See Phabricator D1777 for more details.
Commented upon by hiren and sbruno
Reviewed by: adrian, jhb and bz
Sponsored by: Netflix Inc.
is found, the first usable address is returned for legacy ioctls like
SIOCGIFBRDADDR, SIOCGIFDSTADDR, SIOCGIFNETMASK and SIOCGIFADDR.
While there also fix a subtle issue that a caller from a jail asking for
INADDR_ANY may get the first IP of the host that do not belong to the jail.
Submitted by: glebius
Differential Revision: https://reviews.freebsd.org/D667
Previously there was a race condition between the address addition
and associating it with the CARP which resulted in the interface
MAC, instead of the CARP MAC, being used for a brief amount of time.
This caused "is using my IP address" warnings as well as data being
sent to the wrong machine due to incorrect ARP entries being recorded
by other devices on the network.
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
PR: kern/189089
Reported by: neel
Reviewed by: neel
MFC after: 3 weeks
X-MFC with: 264887
Sponsored by: Spectra Logic
These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.
sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.
sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.
sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.
Clear expected failure messages for kern/187550 and kern/187552.
PR: kern/187550
PR: kern/187552
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic
sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.
tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure
sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib
sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.
PR: kern/187549
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
restricted to a single FIB in a multifib system.
Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.
sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).
sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.
tests/sys/netinet/fibs_test.sh
Clear ATF expected error.
PR: kern/167947
Submitted by: Nikolay Denev <ndenev@gmail.com> (previous version)
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
has the same prefix as some other alias on the same interface, use
newly-added rt_addrmsg() instead of hand-rolled in_addralias_rtmsg().
This eliminates the following rtsock messages:
Pinned RTM_ADD for prefix (for alias addition).
Pinned RTM_DELETE for prefix (for alias withdrawal).
Example (got 10.0.0.1/24 on vlan4, playing with 10.0.0.2/24):
before commit, addition:
got message of size 116 on Fri Jan 10 14:13:15 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
got message of size 192 on Fri Jan 10 14:13:15 2014
RTM_ADD: Add Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
after commit, addition:
got message of size 116 on Fri Jan 10 13:56:26 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 14.0.0.2 14.0.0.255
before commit, wihdrawal:
got message of size 192 on Fri Jan 10 13:58:59 2014
RTM_DELETE: Delete Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
got message of size 116 on Fri Jan 10 13:58:59 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
adter commit, withdrawal:
got message of size 116 on Fri Jan 10 14:14:11 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
Sending both RTM_ADD/RTM_DELETE messages to rtsock is completely wrong
(and requires some hacks to keep prefix in route table on RTM_DELETE).
I've tested this change with quagga (no change) and bird (*).
bird alias handling is already broken in *BSD sysdep code, so nothing
changes here, too.
I'm going to MFC this change if there will be no complains about behavior
change.
While here, fix some style(9) bugs introduced by r260488
(pointed by glebius and bde).
Sponsored by: Yandex LLC
MFC after: 4 weeks
an interface:
- in in_control() skip over not AF_INET addresses.
- in in_aifaddr_ioctl() and in_difaddr_ioctl() do correct check
of address family, w/o accessing memory beyond struct ifaddr.
Sponsored by: Nginx, Inc.
o Provide separate functions for SIOCAIFADDR and for SIOCDIFADDR, with
clear code flow from beginning to the end. After that the rest of
in_control() gets very small and clear.
o Provide sx(9) lock to protect against parallel ioctl() invocations.
o Reimplement logic from r201282, that tried to keep localhost route in
table when multiple P2P interfaces with same local address are created
and deleted.
Discussed with: pluknet, melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
default from the very beginning. It was placed in wrong namespace
net.link.ether, originally it had been at another wrong namespace. It was
incorrectly documented at incorrect manual page arp(8). Since new-ARP commit,
the tunable have been consulted only on route addition, and ignored on route
deletion. Behaviour of a system with tunable turned off is not fully correct,
and has no advantages comparing to normal behavior.
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
all interested parties in case if interface flag IFF_UP has changed.
However, not only SIOCSIFFLAGS can raise the flag, but SIOCAIFADDR
and SIOCAIFADDR_IN6 can, too. The actual |= is done not in the protocol
code, but in code of interface drivers. To fix this historical layering
violation, we will check whether ifp->if_ioctl(SIOCSIFADDR) raised the
IFF_UP flag, and if it did, run the if_up() handler.
This fixes configuring an address under CARP control on an interface
that was initially !IFF_UP.
P.S. I intentionally omitted handling the IFF_SMART flag. This flag was
never ever used in any driver since it was introduced, and since it
means another layering violation, it should be garbage collected instead
of pretended to be supported.
that we still have a problem with this whole structure of
locks and in_input.c [it does not lock which it should not, but
this *can* lead to crashes]. (I have seen it in our SQA
testbed.. besides the one with a refcnt issue that I will
have SQA work on next week ;-)
assure that *all* tables and such are removed before
we start to free. This won't protect the Hash in ip_input.c
but in theory should protect any other uses that *do* use locks.
MFC after: 1 week (or more)
llentry_free() and arptimer():
o Use callout_init_rw() for lle timeout, this allows us safely
disestablish them.
- This allows us to simplify the arptimer() and make it
race safe.
o Consistently use ifp->if_afdata_lock to lock access to
linked lists in the lle hashes.
o Introduce new lle flag LLE_LINKED, which marks an entry that
is attached to the hash.
- Use LLE_LINKED to avoid double unlinking via consequent
calls to llentry_free().
- Mark lle with LLE_DELETED via |= operation istead of =,
so that other flags won't be lost.
o Make LLE_ADDREF(), LLE_REMREF() and LLE_FREE_LOCKED() more
consistent and provide more informative KASSERTs.
The patch is a collaborative work of all submitters and myself.
PR: kern/165863
Submitted by: Andrey Zonov <andrey zonov.org>
Submitted by: Ryan Stone <rysto32 gmail.com>
Submitted by: Eric van Gyzen <eric_van_gyzen dell.com>
