These functions are intended to be used to drop a lock and then reacquire
it when doing an sleep such as msleep(9). Both functions accept a
'struct lock_object *' as their first parameter. The 'lc_unlock' function
returns an integer that is then passed as the second paramter to the
subsequent 'lc_lock' function. This can be used to communicate state.
For example, sx locks and rwlocks use this to indicate if the lock was
share/read locked vs exclusive/write locked.
Currently, spin mutexes and lockmgr locks do not provide working lc_lock
and lc_unlock functions.
excessive interrupt clock timer reset, screwing interrupt generation
for already active channels. Track moving DMA pointer and call buffer
interrupt on each blocksize boundary.
PR: kern/109791
MFC after: 3 days
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
* To use this option with a UDP socket, it must be bound to a local port,
and INADDR_ANY, to disallow possible collisions with existing udp inpcbs
bound to the same port on other interfaces at send time.
* If the socket is bound to INADDR_ANY, specifying IP_SENDSRCADDR with
INADDR_ANY will be rejected as it is ambiguous.
* If the socket is bound to an address other than INADDR_ANY, specifying
IP_SENDSRCADDR with INADDR_ANY will be disallowed by in_pcbbind_setup().
Reviewed by: silence on -net
Tested with: src/tools/regression/netinet/ipbroadcast
MFC after: 4 days
a thread is an idle thread, just see if it has the IDLETD
flag set. That flag will probably move to the pflags word
as it's permenent and never chenges for the life of the
system so it doesn't need locking.
- Remove some excessive parentheses around shift operators.
- Use macro instead of magic number where it is applicable.
- Change lower-case hexdecimals to upper cases to match wpaul's style.
- Revert some unnecessary line wraps and changes from the previous commit.
Pointed out by: bde
in the field. In one situation, one end of the TCP connection sends
a back-to-back RST packet, with delayed ack, the last_ack_sent variable
has not been update yet. When tcp_insecure_rst is turned off, the code
treats the RST as invalid because last_ack_sent instead of rcv_nxt is
compared against th_seq. Apparently there is some kind of firewall that
sits in between the two ends and that RST packet is the only RST
packet received. With short lived HTTP connections, the symptom is
a large accumulation of connections over a short period of time .
The +/-(1) factor is to take care of implementations out there that
generate RST packets with these types of sequence numbers. This
behavior has also been observed in live environments.
Reviewed by: silby, Mike Karels
MFC after: 1 week
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
- Properly note when a read lock is released.
- Always note when we contest on a read lock.
- Only note success of obtaining read locks for the first reader to match
the behavior of sx(9).
Reviewed by: kmacy
station exiting power save mode prepend them to the driver's
send q instead of appending them. This insures the packets
are not misordered wrt any packets already q'd for the station.
This corrects a problem noticed when using a VoIP phone talking
to an ath card in ap mode; the misordered packets caused noise.
Submitted by: "J.R. Oldroyd" <jr@opal.com>
MFC after: 2 weeks
<sys/extattr.h> to <ufs/ufs/extattr.h>. Move description
of extended attributes in UFS from man9/extattr.9 to
man5/fs.5.
Note that restore will not compile until <sys/extattr.h>
and <ufs/ufs/extattr.h> have been updated.
Suggested by: Robert Watson
never correct as CAM has no real understanding of it, and will just immediately
retry the command. This leads to undesirable cycling of the camisr as well as
a high possibility for the command to exhaust its retries before the driver
can get around to servicing it.
The better fix, as demonstrated here, is to freeze the simq and mark the
command as needing to be tried. Then when driver can service the command,
the simq gets unfrozen. This is correct, and documented here to help reduce
the mystery. However, it also points out a shortcoming in CAM error handling
that makes writing drivers harder.
Submitted by: Erich Chen
