here is race between decaying the resource usage in containers, and updating
per-process usage; basically, the former may cause per-container usage
to get smaller than per-process usage.
Submitted by: Rudo Tomori
- Implement a function to ensure that all preempted threads have switched
back out at least once. Use this to make sure there are no stale
references to the old ktr_buf or the lock profiling buffers before
updating them.
Reviewed by: marius (sparc64 parts), attilio (earlier patch)
Sponsored by: EMC / Isilon Storage Division
pgrp2 was used only for debugging, but pgrp2 = pgfind(..) was present in compiled code even for kernels without INVARIANTS
Approved by: trasz (mentor)
MFC after: 1 week
designator to select a process which is waited for. The system call
optionally returns siginfo_t which would be otherwise provided to
SIGCHLD handler, as well as extended structure accounting for child
and cumulative grandchild resource usage.
Allow to get the current rusage information for non-exited processes
as well, similar to Solaris.
The explicit WEXITED flag is required to wait for exited processes,
allowing for more fine-grained control of the events the waiter is
interested in.
Fix the handling of siginfo for WNOWAIT option for all wait*(2)
family, by not removing the queued signal state.
PR: standards/170346
Submitted by: "Jukka A. Ukkonen" <jau@iki.fi>
MFC after: 1 month
- Do not try to steal load from other CPUs if there was no contest switches
on this CPU (i.e. it was idle all the time and woke up just for bus mastering
or TLB shutdown). If current CPU was idle, then it is quite unlikely that some
other CPU has load to steal. Under high I/O rate, when TLB shutdowns cause
numerous CPU wakeups, on 24-CPU system load stealing code may consume up to
25% of all CPU time without giving any benefits.
- Change code that implements spinning for load to restart spin in case of
context switch. Previous code periodically called cpu_idle() even under
high interrupt/context switch rate.
- Rise spinning threshold to 10KHz, where it gives at least some effect
that may worth consumed power.
Reviewed by: jeff@
Some hooks are added to clamp down maxusers and nmbclusters for
small address space systems.
VM_MAX_AUTOTUNE_MAXUSERS - the max maxusers that will be autotuned based on
physical memory.
VM_MAX_AUTOTUNE_NMBCLUSTERS - max nmbclusters based on physical memory.
These are set to the old values on i386 to preserve the clamping that was
being done to all arches.
Another macro VM_AUTOTUNE_NMBCLUSTERS is provided to allow an override
for the calculation on a MD basis. Currently no arch defines this.
Reviewed by: peter
MFC after: 2 weeks
to further reduce latency for threads in this queue. This should help
as threads transition from realtime to timeshare. The latency is
bound to a max of sched_slice until we have more than sched_slice / 6
threads runnable. Then the min slice is allotted to all threads and
latency becomes (nthreads - 1) * min_slice.
Discussed with: mav
give rwlock(9) the ability to crunch different type of structures, with
the only constraint that they have a lock cookie named rw_lock.
This name, then, becames reserved from the struct that wants to use
the rwlock(9) KPI and other locking primitives cannot reuse it for
their members.
Namely such structs are the current struct rwlock and the new struct
rwlock_padalign. The new structure will define an object which has the
same layout of a struct rwlock but will be allocated in areas aligned
to the cache line size and will be as big as a cache line.
For further details check comments on above mentioned revisions.
Reviewed by: jimharris, jeff
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
cache line in order to avoid manual frobbing but using
struct mtx_padalign.
The sole exception being nvme and sxfge drivers, where the author
redefined CACHE_LINE_SIZE manually, so they need to be analyzed and
dealt with separately.
Reviwed by: jimharris, alc
sharing especially on the default CPU 0 callout_cpu structure.
This will be followed up by attilio@ with a conversion to the new struct
mtx_padalign but doing this manual conversion first gives an easy MFC
candidate since mtx_padalign is a more extensive system change.
Sponsored by: Intel
Reviewed by: jeff, attilio
MFC after: 1 week
only constraint that they have a lock cookie named mtx_lock.
This name, then, becames reserved from the struct that wants to use the
mtx(9) KPI and other locking primitives cannot reuse it for their
members.
Namely such structs are the current struct mtx and the new
struct mtx_padalign. The new structure will define an object which is
the same as the same layout of a struct mtx but will be allocated in
areas aligned to the cache line size and will be as big as a cache line.
This is supposed to give higher performance for highly contented mutexes
both spin or sleep (because of the adaptive spinning), where the cache
line contention results in too much traffic on the system bus.
The struct mtx_padalign can be used in a completely transparent way
with the mtx(9) KPI.
At the moment, a possibility to MFC the patch should be carefully
evaluated because this patch breaks the low level KPI
(not its representation though).
Discussed with: jhb
Reviewed by: jeff, andre
Reviewed by: mdf (earlier version)
Tested by: jimharris
executed. This means past the point where userret() is generally
executed.
Skip the td_pinned check if a callchain tracing is currently happening
and add a more robust check to pmc_capture_user_callchain() in order to
catch td_pinned leak past ast() in hwpmc case.
Reported and tested by: fabient
MFC after: 1 week
X-MFC: r240246
overwriting the return mbuf pointer with newly received data after
a loop. Instead append the new mbuf chain to the existing one.
Fix up sb_lastrecord when dequeuing mbuf's so that sbappend_stream()
doesn't get confused.
For the remainder copy case in the mbuf delivery part deduct the
copied length len instead of the whole mbuf length. Additionally
don't depend on 'n' being being available which isn't true in the
case of MSG_PEEK.
Fix the MSG_WAITALL case by comparing against sb_hiwat. Before
it was looping for every receive as sb_lowat normally is zero.
Add comment about issue with (MSG_WAITALL | MSG_PEEK) which isn't
properly handled.
Submitted by: trociny (except for the change in last paragraph)
mbuf's by doing proper testing with M_WRITABLE().
In m_collapse() replace an incomplete manual check for M_RDONLY
with the M_WRITABLE() macro that also tests for shared buffers
and other cases that make a particular mbuf immutable.
MFC after: 2 weeks
In the old TTY layer, SIGTTIN was correctly handled like this:
while (data should be read) {
send SIGTTIN if not foreground process group
read data
}
In the new TTY layer, however, this behaviour was changed, based on a
false interpretation of the standard:
send SIGTTIN if not foreground process group
while (data should be read) {
read data
}
Correct this by pushing tty_wait_background() into the ttydisc_read_*()
functions.
Reported by: koitsu
PR: kern/173010
MFC after: 2 weeks
A default install on large memory machines with multiple 10gigE interfaces
were not being given enough mbufs to do full bandwidth TCP or NFS traffic.
To keep the value somewhat reasonable, we scale back the number of
maxuers by 1/6 past the 384 point. This gives us enough mbufs for most
of our pretty basic 10gigE line-speed tests to complete.
This enables CPU searches (which read tdq_load) to operate independently
of any contention on the spinlock. Some scheduler-intensive workloads
running on an 8C single-socket SNB Xeon show considerable improvement with
this change (2-3% perf improvement, 5-6% decrease in CPU util).
Sponsored by: Intel
Reviewed by: jeff
more appropriate named kernel options for the very distinct
send and receive path.
"options SOCKET_SEND_COW" enables VM page copy-on-write based
sending of data on an outbound socket.
NB: The COW based send mechanism is not safe and may result
in kernel crashes.
"options SOCKET_RECV_PFLIP" enables VM kernel/userspace page
flipping for special disposable pages attached as external
storage to mbufs.
Only the naming of the kernel options is changed and their
corresponding #ifdef sections are adjusted. No functionality
is added or removed.
Discussed with: alc (mechanism and limitations of send side COW)
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
Return EPERM if processes were found but they
were unable to be signaled.
Return the first error from p_cansignal if no signal was successful.
Reviewed by: jilles
Approved by: cperciva
MFC after: 1 week
Return EPERM if processes were found but they
were unable to be signaled.
Return the first error from p_cansignal if no signal was successful.
Reviewed by: jilles
Approved by: cperciva
MFC after: 1 week
output and replace it with a new visible sysctl kern.ipc.acceptqueue
of the same functionality. It specifies the maximum length of the
accept queue on a listen socket.
The old kern.ipc.somaxconn remains available for reading and writing
for compatibility reasons so that existing programs, scripts and
configurations continue to work. There no plans to ever remove the
orginal and now hidden kern.ipc.somaxconn.
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
counter, without actually allocating the vnodes. The supposed use of
the getnewvnode_reserve(9) is to reclaim enough free vnodes while the
code still does not hold any resources that might be needed during the
reclamation, and to consume the slack later for getnewvnode() calls
made from the innards. After the critical block is finished, the
caller shall free any reserve left, by getnewvnode_drop_reserve(9).
Reviewed by: avg
Tested by: pho
MFC after: 1 week
division by zero later if event timer's minimal period is above one second.
For now it is just a theoretical possibility.
Found by: Clang Static Analyzer
instruction loads/stores at its will.
The macro __compiler_membar() is currently supported for both gcc and
clang, but kernel compilation will fail otherwise.
Reviewed by: bde, kib
Discussed with: dim, theraven
MFC after: 2 weeks
.. when deciding whether to continue tracing across suid/sgid exec.
Otherwise if root ktrace-d an unprivileged process and the processed
exec-ed a suid program, then tracing didn't continue across exec.
Reviewed by: bde, kib
MFC after: 22 days
When performing a non-blocking read(2), on a TTY while no data is
available, we should return EAGAIN. But if there's a modem disconnect,
we should return 0. Right now we only return 0 when doing a blocking
read, which is wrong.
MFC after: 1 month
If you have a binary on a filesystem which is also mounted over by
nullfs, you could execute the binary from the lower filesystem, or
from the nullfs mount. When executed from lower filesystem, the lower
vnode gets VV_TEXT flag set, and the file cannot be modified while the
binary is active. But, if executed as the nullfs alias, only the
nullfs vnode gets VV_TEXT set, and you still can open the lower vnode
for write.
Add a set of VOPs for the VV_TEXT query, set and clear operations,
which are correctly bypassed to lower vnode.
Tested by: pho (previous version)
MFC after: 2 weeks
I have to note that POSIX is simply stupid in how it describes O_EXEC/fexecve
and friends. Yes, not only inconsistent, but stupid.
In the open(2) description, O_RDONLY flag is described as:
O_RDONLY Open for reading only.
Taken from:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/open.html
Note "for reading only". Not "for reading or executing"!
In the fexecve(2) description you can find:
The fexecve() function shall fail if:
[EBADF]
The fd argument is not a valid file descriptor open for executing.
Taken from:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html
As you can see the function shall fail if the file was not open with O_EXEC!
And yet, if you look closer you can find this mess in the exec.html:
Since execute permission is checked by fexecve(), the file description
fd need not have been opened with the O_EXEC flag.
Yes, O_EXEC flag doesn't have to be specified after all. You can open a file
with O_RDONLY and you still be able to fexecve(2) it.
global variables are placed. When a module is loaded by link_elf
linker its variables from "set_vnet" linker set are copied to the
kernel "set_vnet" ("modspace") and all references to these variables
inside the module are relocated accordingly.
The issue is when a module is loaded that has references to global
variables from another, previously loaded module: these references are
not relocated so an invalid address is used when the module tries to
access the variable. The example is V_layer3_chain, defined in ipfw
module and accessed from ipfw_nat.
The same issue is with DPCPU variables, which use "set_pcpu" linker
set.
Fix this making the link_elf linker on a module load recognize
"external" DPCPU/VNET variables defined in the previously loaded
modules and relocate them accordingly. For this set_pcpu_list and
set_vnet_list are used, where the addresses of modules' "set_pcpu" and
"set_vnet" linker sets are stored.
Note, archs that use link_elf_obj (amd64) were not affected by this
issue.
Reviewed by: jhb, julian, zec (initial version)
MFC after: 1 month
getmq_read() and getmq_write() respectively, just like sys_kmq_timedreceive()
and sys_kmq_timedsend().
Sponsored by: FreeBSD Foundation
MFC after: 2 weeks
Well, in theory we can pass those two flags, because O_RDONLY is 0,
but we won't be able to read from a descriptor opened with O_EXEC.
Update the comment.
Sponsored by: FreeBSD Foundation
MFC after: 2 weeks
If O_EXEC is provided don't require CAP_READ/CAP_WRITE, as O_EXEC
is mutually exclusive to O_RDONLY/O_WRONLY/O_RDWR.
Without this change CAP_FEXECVE capability right is not enforced.
Sponsored by: FreeBSD Foundation
MFC after: 3 days
"genunix" This will requires us to modify externally created
DTrace scripts but makes logical sense for FreeBSD.
Requested by: rpaulo
MFC after: 2 weeks
as controlled by kern.random.sys.harvest.swi. SWI harvesting feeds into
the interrupt FIFO and each event is estimated as providing a single bit of
entropy.
Reviewed by: markm, obrien
MFC after: 2 weeks
slot. This eventually results in exhaustion of the tid space, causing
new threads get tid -1 as identifier.
The bad effect of having the thread id equal to -1 is that
UMTX_OP_UMUTEX_WAIT returns EFAULT for a lock owned by such thread,
because casuword cannot distinguish between literal value -1 read from
the address and -1 returned as an indication of faulted
access. _thr_umutex_lock() helper from libthr does not check for
errors from _umtx_op_err(2), causing an infinite loop in
mutex_lock_sleep().
We observed the JVM processes hanging and consuming enormous amount of
system time on machines with approximately 100 days uptime.
Reported by: Mykola Dzham <freebsd levsha org ua>
MFC after: 1 week
trap checks (eg. printtrap()).
Generally this check is not needed anymore, as there is not a legitimate
case where curthread != NULL, after pcpu 0 area has been properly
initialized.
Reviewed by: bde, jhb
MFC after: 1 week
set p_xstat to the signal that triggered the stop, but p_xstat is also
used to hold the exit status of an exiting process. Without this change,
a stop signal that arrived after a process was marked P_WEXIT but before
it was marked a zombie would overwrite the exit status with the stop signal
number.
Reviewed by: kib
MFC after: 1 week
Idle threads are not allowed to acquire any lock but spinlocks.
Deny any attempt to do so by panicing at the locking operation
when INVARIANTS is on. Then, remove the check on blocking on a
turnstile.
The check in sleepqueues is left because they are not allowed to use
tsleep() either which could happen still.
Reviewed by: bde, jhb, kib
MFC after: 1 week
with TDP_NOSLEEPING on.
The current message has no informations on the thread and wchan
involed, which may be useful in case where dumps have mangled dwarf
informations.
Reported by: kib
Reviewed by: bde, jhb, kib
MFC after: 1 week
about vnode reclamation. Typical use is for the bypass mounts like
nullfs to get a notification about lower vnode going away.
Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument
lowervp which is reclaimed. It is possible to register several
reclamation event listeners, to correctly handle the case of several
nullfs mounts over the same directory.
For the filesystem not having nullfs mounts over it, the overhead
added is a single mount interlock lock/unlock in the vnode reclamation
path.
In collaboration with: pho
MFC after: 3 weeks
lookup code that dotdot lookups shall override any shared lock
requests with the exclusive one. The flag is useful for filesystems
which sometimes need to upgrade shared lock to exclusive inside the
VOP_LOOKUP or later, which cannot be done safely for dotdot, due to
dvp also locked and causing LOR.
In collaboration with: pho
MFC after: 3 weeks
TDP_NOSLEEPING leaking from syscallret() to userret() so that also
trap handling is covered. Also, the check on td_locks is not duplicated
between the two functions.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
0 - loader hints in environment only;
1 - static hints only
2 - fallback mode (Dynamic KENV with fallback to kernel environment)
Add kern.hintmode write handler, accept only value 2. That will switch
static KENV to dynamic. So it will be possible to change device hints.
Approved by: adrian (mentor)
