installation ISOs:
- TYPE, BRANCH, and REVISION are only defined if
OSRELEASE is not defined, so in situations where
one might set OSRELEASE for an in-house ISO build,
VOLUME_LABEL would be empty.
- makefs(8) limits the volume label to 32 characters,
which for the powerpc64 case, OSRELEASE expands to
FreeBSD-11.0-CURRENT-powerpc-powerpc64. Even with
removing the prefixing 'FreeBSD-', the string is 30
characters long, leaving zero room for suffixing the
type of ISO media (BO for bootonly, CD for cdrom, and
DVD for dvdrom).
Resolve these by defining VOLUME_LABEL when defining
OSRELEASE if unset. If OSRELEASE is defined by the
builder, use the OSRELEASE from that definition as the
VOLUME_LABEL.
In addition, for cases where both TARGET and TARGET_ARCH
are used for the VOLUME_LABEL, use TARGET_ARCH if it
differs from TARGET.
There are probably a few sharp edges here yet, but these
problems are going to affect the powerpc/powerpc64 builds
for 10.1-RELEASE, so the immediate concern is fixing the
underlying problem at hand quickly, and less so about the
elegance of the fix.
MFC after: 3 days
X-MFC-10.1: yes, asap
Sponsored by: The FreeBSD Foundation
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
Sponsored by: The FreeBSD Foundation
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
Sponsored by: The FreeBSD Foundation
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
Sponsored by: The FreeBSD Foundation
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
Sponsored by: The FreeBSD Foundation
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
Sponsored by: The FreeBSD Foundation
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
Sponsored by: The FreeBSD Foundation
r262491, r262493, r262516, r267345, r267397:
r262491:
Add DEBUG_DISTRIBUTIONS, and set it to include base and
EXTRA_DISTRIBUTIONS, excluding 'doc', since the documentation
distribution does not have corresponding debug information.
Use DEBUG_DISTRIBUTIONS in the 'distributeworld installworld'
and 'packageworld' targets, to reduce the number of occurances
of excluding distributions that do not have .debug files.
r262493:
In release/Makefile, explicitly set WITHOUT_DEBUG_FILES=1
for dvdrom and cdrom targets. (Later reverted.)
Exclude the *.debug.txz distributions from dvdrom and
cdrom images, but include them for ftp distribution.
r262516:
Rename ${dist}.debug.txz to ${dist}-dbg.txz to prevent the
following output:
eval: ${base....}: Bad substitution
eval: ${doc....}: Bad substitution
eval: ${games....}: Bad substitution
eval: ${lib32....}: Bad substitution
This also follows other naming conventions seen in the
wild.
r267345:
Explicitly set MK_DEBUG_FILES=no, which overrides the
WITH_DEBUG_FILES=1 and WITHOUT_DEBUG_FILES=1 collisions
previously experienced.
This change allows us to create the {base,kernel}_debug.txz
distributions without accidentally installing the *.debug
files on the medium itself.
r267397:
Remove evaluations of MK_DEBUG_FILES where not needed.
If DEBUG_DISTRIBUTIONS is empty, which is true if
MK_DEBUG_FILES evaluates to 'no' above, the loop does
nothing.
MFC after: 1 month
Tested on: head@r267801
Reviewed by: brooks [1], emaste, imp [1]
[1] earlier version
Sponsored by: The FreeBSD Foundation
This allows greater granular control over the release
build, and avoids WITH_FOO=1 and WITHOUT_FOO=1 collision.
This change was verified to produce correct results
compared to an earlier build by diffing find(1) output
of the resulting bootonly/, dvd/, and release/ directories.
Tested on: head@r267449
MFC after: 1 month
X-MFC-Note: Requires commits not yet MFC'd, so likely
longer than 1 month.
Sponsored by: The FreeBSD Foundation
On head/, or more specifically, when WITNESS is in
the kernel config, the console is spammed excessively
with lock order reversal between isofs and devfs.
Set debug.witness.trace=0 in the installer sysctl.conf
to avoid printing the full KDB stack backtrace. This
does not prevent printing the lock order reversal has
happened, only lessens the console spam.
Sponsored by: The FreeBSD Foundation
when WITH_COMPRESSED_IMAGES is used.
Requested by: delphij, brooks, Nikolai Lifanov
MFC After: 1 week
X-MFC-With: r264027,r264028,r264029,r264030
Sponsored by: The FreeBSD Foundation
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.
With gzip(1) compression, downloadable image are reduced in
size quite significantly. Build test against head@263927
shows the following:
bootonly.iso: 64% smaller
disc1.iso: 44% smaller
memstick.img: 47% smaller
mini-memstick.img: 65% smaller
dvd1.iso: untested
This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.
Requested by: wkoszek
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
src/ and ports/ distributions.
While I am thinking about it, exclude .git directories for src/
and ports/, as somewhat of a followup to r262499.
Sponsored by: The FreeBSD Foundation
- Add a release-dvd.conf pkg(8) configuration file to override
the default FreeBSD.conf configuration.
- Remove architecture-specific pkg-stage.conf files, consolidate,
and move their contents to scripts/pkg-stage.sh.
- Use 'pkg -vv' to determine the ABI, which is used as the
cache directory.
Prior to these changes, it would be possible for pkg-stage to fetch
conflicting binary packages from multiple repositories.
Tested against: head@r260522, stable/10@r260522
MFC after: 3 days
X-Insta-MFC: possibly
Sponsored by: The FreeBSD Foundation
to what is done for mergemaster(8). This allows etcupdate(8)
to work out-of-box after the first upgrade of a system.
Submitted by: jhb
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
installation.
As part of the 'pkg-stage' target, copy the configuration file
to the 'packages/repos/' directory on the DVD filesystem.
MFC after: 3 days
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
specifying 'WITH_DVD=1' during 'make release'.
This caused some problems during the freebsd-update builds for
10.0-BETA4.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
with the additional step of fetching packages for inclusion on the
dvd image.
The 'pkg-stage' target is used to run 'scripts/pkg-stage.sh' if
the '${TARGET}/pkg-stage.conf' configuration file exists (currently
only amd64 and i386).
Allow dvd1.iso to be skipped if NODVD=1.
MFC after: 3 days
X-MFC-With: r258305, r258307, r258308, r258309
Sponsored by: The FreeBSD Foundation
'bootonly.iso' components to create a smaller memory stick image.
This is useful for system recovery, where a full memstick.img image
is not necessarily needed (or wanted). In addition, it is possible to
do bootonly-style installation, where the base.txz, kernel.txz, etc.
are fetched from a remote source.
Provide backwards-compatible target (mini-memstick), to keep in sync
with the targets documented in release/Makefile.
Prompted by: wblock
MFC after: 1 week
X-MFC-after: 10.0-RELEASE
Sponsored by: The FreeBSD Foundation
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
distribution. This can happen if the src/ tree checkout is
within its own ZFS dataset, and the 'snapdir' ZFS property
is set to 'visible.'
Approved by: hrs
MFC after: 3 days
X-MFC-To: stable/9 only
