line up the function names in an earlier generation of the API when
some of the functions returned structure pointers.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
apply PHYS_TO_VM_PAGE() to the physical address obtained from the page
table.
(This is based upon similar changes made to the amd64 and i386 pmaps and
a part of a long-term campaign to eliminate pte objects.)
Tested by: wilko
- Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds
the header type.
- Replace several magic numbers with appropriate constants for the header
type register and a couple of PCI_FUNCMAX.
- Merge to amd64 the fix to the i386 bridge code to skip devices with
unknown header types.
Requested by: imp (1, 2)
- Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode
interlock.
- Don't use the B_LOCKED flag and QUEUE_LOCKED for background write
buffers. Check for the BKGRDINPROG flag before recycling or throwing
away a buffer. We do this instead because it is not safe for us to move
the original buffer to a new queue from the callback on the background
write buffer.
- Remove the B_LOCKED flag and the locked buffer queue. They are no longer
used.
- The vnode interlock is used around checks for BKGRDINPROG where it may
not be strictly necessary. If we hold the buf lock the a back-ground
write will not be started without our knowledge, one may only be
completed while we're not looking. Rather than remove the code, Document
two of the places where this extra locking is done. A pass should be
done to verify and minimize the locking later.
reading the CIS on some cards. However, not all just yet. This makes
at least some of the xircom cards that weren't working to work. It
doesn't make my home and away card work, however.
o Don't get the card offset wrong. This is the biggest hassle for
reading the CIS. The old code was just so wrong I can't believe that
it worked at all.
o Don't set the bit that allows/forces 16-bit memory access to the
memory. It is hard coded with 0x80.
o Don't need to slow down memory access with wait-states. OLDCARD didn't
need them and it doesn't hurt anything.
o remove bogus grousying in comment.
32K pages are selected. In spec_getpages() change the printf format
specifier and add an explicit cast so that we always print the field
as a long type.
- In ULCK_BUF we no longer need to acquire the lock, just write the buf out.
- The combination of these changes eliminates one more use of B_LOCKED which
is in the way of making the buffer cache SMP safe. In the long term
ext2fs should probably not try to optimize the use of their metadata bufs
with a private cache. This will starve the rest of the system for buffers
in the extreme case.
Discussed with: bde (A long time ago..)
Tested on: md disk/x86
Bug Fixes:
- Allow users to use LAA
- Remember promiscuous mode settings while bridging
- Allow gratuitous arp's to be sent
PR: 52966/54488
MFC after: 1 week
METEORSSIGNAL ioctl. Applications use this ioctl with the value
METEOR_SIG_MODE_MASK (0xFFFF0000, -65536) to reset signal delivery,
but revision 1.126 caused the driver to return EINVAL in this case.
Interestingly, the same METEORSSIGNAL ioctl in the meteor driver uses
0 to reset signal delivery.
This commit allows METEOR_SIG_MODE_MASK as a synonym for 0 in the
bktr driver, and restructures the code a bit so that it is otherwise
identical between the bktr and meteor drivers.
returned mbuf can be NULL. Check for NULL in rip_output() when
prepending an IP header. This prevents mbuf exhaustion from
causing a local kernel panic when sending raw IP packets.
PR: kern/55886
Reported by: Pawel Malachowski <pawmal-posting@freebsd.lublin.pl>
MFC after: 3 days
compatibility routine, go ahead and accept that as 'success'. A
properly written compatible driver should return < 0 for both the
compat match and compat probe routines, so this will wind up doing the
right thing.
This will get rid of the warnings issued at shutdown (that seems to
worry alot of users), but will also no flush cache on lots of
devices that can, but doesn't set the right support bits...
Without this option it is not possible to omit the driver from the
configuration file and successfully build a kernel.
This option is specific to alpha.
implementations. Use those on platforms that don't have MD
headers. Remove the ia64 MD header. We're going to use the C
implementation there.
Suggested by: bde
Restructure the way ATA/ATAPI commands are processed, use a common
ata_request structure for both. This centralises the way requests
are handled so locking is much easier to handle.
The driver is now layered much more cleanly to seperate the lowlevel
HW access so it can be tailored to specific controllers without touching
the upper layers. This is needed to support some of the newer
semi-intelligent ATA controllers showing up.
The top level drivers (disk, ATAPI devices) are more or less still
the same with just corrections to use the new interface.
Pull ATA out from under Gaint now that locking can be done in a sane way.
Add support for a the National Geode SC1100. Thanks to Soekris engineering
for sponsoring a Soekris 4801 to make this support.
Fixed alot of small bugs in the chipset code for various chips now
we are around in that corner anyways.
bus tag is to allow bus space accesses prior to having newbus
fully initialized, such as would be the case for console drivers.
Since barriers are a fundamental part of bus space accesses, not
allowing them on fake tags would defeat the purpose of these tags.
We use the barrier function normally associated with nexus. This
is the barrier used when subordinates haven't defined a barrier
themselves.
support stripped out and minimally renamed to owi. This driver
attaches to lucent cards only. This is designed to aid in the testing
of fixes to the wi driver for lucent cards. It is supported only as a
module (you cannot compile it into your kernel). You cannot have the
wi driver in your kernel (or loaded as a moudle) to use the owi
module.
I've not connected it to build, as this module is currently for
debugging purposes. This is for developers only at the present time.
If we can't get lucent support fixed by 5.2 code freeze, then we'll
re-evaulate this support level. Please use this to fix the lucent
support in dev/wi. This will be removed from the system when lucent
support has been fixed in dev/wi.
Note to developers: Do not connect this to the build, make it possible
to build into the kernel or otherwise 'integrate' this into system
without checking with me first. This is for debugging purposes only.
If this doesn't work for you, I don't want to hear about it unless you
are fixing the wi driver :-)
gfb_draw if 'flip' is specified. This causes the mouse cut region
to be displayed in reverse color so it is visbile.
- Use the "other" implementation of gfb_cursor for the creator driver,
which doesn't assume there is a hardware cursor. It seems that the
hardware cursor that creator provides doesn't display the character
under the cursor in reverse colors, so the driver does this manually
and uses the hardware cursor for the mouse pointer (which it also works
much better for). This is wedged here because it required less hoops
than accessing the syscons vtb from inside the video driver, which is
needed to read the character and color attributes under the new cursor
position.
These are fixed resolution and operate only in pixel mode so they present
a challenge to syscons (square peg, round hole, etc, etc). The driver
provides a video driver interface for syscons and a separate character
device for X to mmap. Wherever possible the creator's accelarated graphics
functions are used so text mode is very fast.
Based roughly on the openbsd driver.
goto and abstracted by the itry, ithrow and icatch macros (among
others). The problem with this code is that it doesn't compile on
ia64. The compiler is sufficiently confused that it inserts a call
to __ia64_save_stack_nonlock(). This is a magic function that saves
enough of the stack to allow for non-local gotos, such as would be
the case for nested functions. Since it's not a compiler defined
function, it needs a runtime implementation. This we have not in a
standalone compilation as is the kernel.
There's no indication that the compiler is not confused on other
platforms. It's likely that saving the stack in those cases is
trivial enough that the compiler doesn't need to off-load the
complexity to a runtime function.
The code is believed to be correctly translated, but has not been
tested. The overall structure remained the same, except that it's
made explicit. The macros that implement the try/catch construct
have been removed to avoid reintroduction of their use. It's not
a good idea.
In general the rewritten code is slightly more optimal in that it
doesn't need as much stack space and generally is smaller in size.
Found by: LINT
round the result up to a multiple of 4 bytes so that it will always
be a multiple of the sample size. Also use the actual buffer size
from sc->bufsz instead of the default DS1_BUFFSIZE.
This fixes panics and bad distortion I have seen on Yamaha DS-1
hardware, mainly when playing certain Real Audio media.
Reviewed by: orion (an earlier version of the patch)
first sample in the buffer to be ignored. The bug caused a repetitive
glitch in one of the stereo channels when playing mono sound on
configurations that use the monotostereo16 feeder.
Reviewed by: orion
to intptr_t. This fixes a compiler warning (integer from pointer
without cast) in scvgarndr.c when SC_PIXEL_MODE is defined.
o Define readb() and writeb(). Both are used in scvgarndr.c when,
guess what, SC_PIXEL_MODE is defined.
Both changes are ia64 specific.
Found by: LINT
reacquire the "first" object's lock while a backing object's lock is held.
Since this is a lock-order reversal, vm_fault() uses trylock to acquire
the first object's lock, skipping the sequential access optimization in
the unlikely event that the trylock fails.
in struct vm_page are defined as u_int for 16K pages and u_long
for 32K pages, with the implied assumption that long will at least
be 64 bits wide on platforms where we support 32K pages.
from the ia32 specific stuff. Some of this still needs to move to the MI
freebsd32 area, and some needs to move to the MD area. This is still
work-in-progress.
commands. Add a quirk for the Creative Nomad MuVo USB device that uses
it as well as NO_SYNCHRONIZE_CACHE.
PR: kern/53094
Submitted by: Richard Nyberg <rnyberg@it.su.se>
MFC after: 3 days
device should handle them.
This prevents for instance GEOM::ioctl requests from reaching a
lower BSDlabel node, which ps@ found would confuse newfs(8).
CB710, CB720, CB1211, CB1225, CB1410 and CB1420
These are likely licensed designed from TI, and the Linux PCMCIA code
treats them as TI chips.
Add comment, but no ID for the 711E1 from O2Micro.
