In certain scenarios, it is possible for PCPU data to be
accessed before it has been initialized (e.g. during printf
if the kernel was built with the TSLOG option).
Initialize the PCPU pointer for hart 0 at the beginning of
initriscv() rather than near the end.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D19726
Since r233109, kldload has the -n option, which silently ignores options
that are already loaded.
https://lists.freebsd.org/pipermail/freebsd-rc/2018-December/003899.html
Note that this script no longer reports if the module is already loaded,
but it could be argued this wasn't particularly useful information.
PR: docs/234248
Reviewed by: bcr (docs), kib, rgrimes (visual)
Approved by: jilles
Differential Revision: https://reviews.freebsd.org/D18670
DEBUG_FLAGS is always added to CFLAGS. This setting appears to be
accidental and came in with r243327.
Reviewed by: anish, emaste, jhb, rgrimes
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19787
Such processes will be reparented to the reaper when the current
parent is done with them (i.e., ptrace detached), so p_oppid must be
updated accordingly.
Add a regression test to exercise this code path. Previously it
would not be possible to reap an orphan with a stale oppid.
Reviewed by: kib, mjg
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19825
346002 did miss the fact that we do not only undo the loadaddr, but also
we need to remove the inserted module. Implement file_remove() to do the job.
MFC after: 1w
The last_file variable is used to reset the loadaddr variable back to original
value; however, it is possible the last_file is NULL, so we can not blindly
trust it. But then again, we can just save the original loadaddr and use
the saved value for recovery.
MFC after: 1w
r345994 has finally fixed the bug that caused the nfsuserd(8) daemon to
fail when jails were enabled, so delete the BUGS entry from the man page.
PR: 205193
MFC after: 2 weeks
are enabled.
The nfsuserd(8) daemon does not function correctly when jails are enabled,
since localhost gets mapped to another IP address and, as such, the upcall
RPC fails.
This patch fixes the problem by doing a getsockname(2) of a socket mapped
to localhost to find out what the correct address is for the comparison
test with the upcall's from IP address.
This patch also adds INET6 support and the required #ifdef's for INET and
INET6. It now uses INET6 by default for the upcalls, if the kernel has
INET6 support and the daemon is also built with INET6 support.
Tested by: freebsd@danielengel.com (earlier version)
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19218
'tos' is an index into an array and never holds a negative value. Correct
its signedness to match PCTRIE_LIMIT, which it is compared to in assertions.
No functional change (kills a warning).
The kernel code uses UDP to do upcalls to the nfsuserd(8) daemon to get
updates to the username<->uid and groupname<->gid mappings.
A change to AF_LOCAL last year had to be reverted, since it could result
in vnode locking issues on the AF_LOCAL socket.
This patch adds INET6 support and the required #ifdef INET and INET6
to the code.
Requested by: bz
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: http://reviews.freebsd.org/D19218
Don't page fault if the file descriptor provided with "-o fd" is invalid.
This is a merge of r345419 from the projects/fuse2 branch.
Reviewed by: ngie
Tested by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19836
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
* The BIO bio_data may not be page aligned. Only the base address of each
page worth of data is extracted to pass to OPAL. Without page alignment
it can scribble over random memory when finishing the page read. Fix this
by short-reading the first page to properly align for full page reads.
* Fix the definition of OPAL_FLASH_ERASE.
* Properly handle the async message result, as now returned from r345974.
* Properly return the full opal_msg from an async completion.
* Don't keep bugging OPAL, wait 100us or so. With some minor changes to
DELAY() to drop to very low priority, the thread won't hog the CPU while
polling for the async completion.
ifconfig(8) syntax allows to specify only single address_family,
so we need additional invocation of ifconfig to support configuration
of cloned gif interface that may use different address families
for its internal and external addresses.
Also, ifconfig(8) does not allow to omit "inet6" keyword for address family
specifying IPv6 addresses as outer addresses of the interface.
Also, address_family is not "parameter" and it has to go before parameters
including "tunnel" keyword, so "ifconfig gif0 tunnel inet6 $oip1 $oip2" would be
wrong syntax and only "ifconfig gif0 inet6 tunnel $oip1 $oip2" is right.
With this change, the following works:
gifconfig_gif0="inet6 2a00::1 2a01::1"
ifconfig_gif0="inet 10.0.0.1 10.0.0.2 netmask 255.255.255.252"
MFC after: 2 weeks
It performs BUS_RESET_CHILD() on the parental bus and the specified
device.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
For PCI device (i.e. child of a PCI bus), reset tries FLR if
implemented and worked, and falls to power reset otherwise.
For PCIe bus (child of a PCIe bridge or root port), reset
disables PCIe link and then re-trains it, performing what is known as
link-level reset.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
The methods BUS_RESET_PREPARE(), BUS_RESET(), and BUS_RESET_POST()
should be implemented by bus which can provide reset to a device. The
methods are described in inline doxygen comments.
Code only provides BUS_RESET_PREPARE() and BUS_RESET_POST() helpers
instead of default implementation, because actual bus needs to handle
device state around reset, while helpers provide the other half of
typical prepare/post code.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
bhyve's NVMe emulation was transferring Identify data back to the guest
incorrectly causing memory corruptions. These corruptions resulted in
core dumps and other system level errors in the guest.
In their simplest form, NVMe Physical Region Page (PRP) values in
commands indicate which physical pages to use for data transfer. The
first PRP value is not required to be page aligned but does not cross a
page boundary. The second PRP value must be page aligned, does not cross
a page boundary, and need not be contiguous with PRP1.
The code was copying Identify data past the end of PRP1. This happens to
work if PRP1 and PRP2 are physically contiguous but will corrupt guest
memory in unpredictable ways if they are not.
Fix is to copy the Identify data back to the guest piecewise (i.e. for
each PRP entry). Also fix a similarly wrong problem when copying back
Log page data.
Reviewed by: imp (mentor), araujo, jhb, rgrimes, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19695
The NVMe specification defines bits 13:4 of BAR0 as Reserved (i.e. 0x0).
Most drivers do not enforce this, but the Windows NVMe driver does and
will refuse to start the device (i.e. error 10) if any of these bits are
set.
The current BAR size calculation tries to minimize the amount of memory
the device reserves by scaling the BAR size by the maximum number of
queues supported by the device. But unless the device supports a large
number of queue pairs (over 1536), it will reserve too little memory.
The fix is to allocate a minimum of 16K bytes for BAR0.
Tested on Windows Server 2016 and 2019
Reviewed by: imp (mentor), araujo, jhb, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19676
Otherwise we might miss the last iteration where EOF appears below
unaligned noff.
Reported and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19811
Add the ability to use interrupts for i2c message.
We still use polling for early boot i2c transfer (for PMIC
for example) but as soon as interrupts are available use them.
On Allwinner SoC >A20 is seems that polling mode is broken for some
reason, this is now fixed by using interrupt mode.
For Allwinner also fix the frequency calculation, the one in the code
was for when the APB frequency is at 48Mhz while it is at 24Mhz on most
(all?) Allwinner SoCs. We now support both cases.
While here add more debug info when it's compiled in.
Tested On: A20, H3, A64
MFC after: 1 month
Remove the phrase from boilerplate copyright we stick on vers.c when
we can't find the template file. In practice, this won't change a
thing, except for the case of compiling the kernel standalone w/o the
rest of a tree on a system that doesn't have
/usr/share/examples/etc/bsd-copyright installed.
