- Replace do-while statements with void expressions.
- Wrap __asm statements in statement expressions.
- Make the macros function-like:
- Evaluate all arguments exactly once.
- Make sure there's a sequence point between evaluation of the arguments
and the function body. Arguments should be evaluated before any memory
barriers.
- Fix use of __atomic_is_lock_free built-in. It requires the address of
an atomic variable as second argument. Use this built-in on clang as
well because clang's __c11_atomic_is_lock_free only takes the size of the
variable into account.
- In atomic_exchange_explicit put the barrier before instead of after the
__sync_lock_test_and_set call.
Reviewed by: theraven
- Use a dedicated task to handle deferred transmits from the if_transmit
method instead of reusing the existing per-queue interrupt task.
Reusing the per-queue interrupt task could result in both an interrupt
thread and the taskqueue thread trying to handle received packets on a
single queue resulting in out-of-order packet processing and lock
contention.
- Don't define ixgbe_start() at all where if_transmit is used.
Tested by: Vijay Singh
Reviewed by: jfv
MFC after: 2 weeks
is set by specifying '-a <arch>'. (Only supported for i386 on amd64
and powerpc on powerpc64 currently).
- Change how textproc/docproj is installed:
o Attempt to install from pkg(8);
o Fall back to pkg_add(1) if pkg(8) installation is not
successful;
o Fall back to installing from ports as last resort.
- Ensure the script is run by root[1].
- Get OSVERSION from param.h[1].
Provided by: glebius [1]
Reviewed by: nwhitehorn, kensmith
Approved by: kensmith
MFC After: 2 weeks
X-Needs-MFC: r240586, r240587, r240588
When the compiler is clang add c++11 to COMPILER_FEATURES.
When the compiler supports c++11, default to building libc++. This will
not impact the compliation of programs, but will make it easier for
users with clang compiled systems to test libc++ by passing -stdlib=libc++
to their c++ compliations.
Device nodes are in the format /dev/led/isci.busX.portY.locate.
Sponsored by: Intel
Requested by: Paul Maulberger <paul dot maulberger at gmx dot de>
MFC after: 1 week
things like EAPOL frames make it out.
After a whole bunch of hacking/testing, I discovered that they weren't
being early-dropped by the stack (but I should look at ensuring that
later..) but were even making to the hardware transmit queue.
They were mostly even being received by the remote end. However, the
remote end was completely ignoring them.
This didn't happen under 150-170MBit TCP tests as I'm guessing the TX
queue stayed very busy and the STA didn't do any scanning. However, when
doing 100Mbit/s of TCP traffic, the STA would do background scanning -
which involves it coming in and out of powersave mode with the AP.
Now, this is a total and utter hack around the real problems, which are:
* I need to implement proper power save handling and integrate it into
the filtered frames support, so the driver/stack doesn't send frames
whilst the station is actually in sleep;
* .. but frames were actually making it to the STA (macbook pro) and
the AP did receive an ACK; but a tcpdump on the receiving side showed
the EAPOL frame never made it. So the stack was dropping it for
some reason;
* Importantly - the EAPOL frames are currently going into the non-QoS
TID, which maps to the BE queue and is susceptible to that queue being
busy doing other things, but;
* There's other traffic going on in the non-QoS TID from other contexts
when scanning is going on and it's possible there's some races causing
sequence number/IV issues, but;
* Importantly importantlly, I think the interaction with TID 16 multicast
traffic in power save mode is causing issues - since I -believe- the
sequence number space being used by the EAPOL frames on TID 16 overlaps
with the multicast frames that have sequence numbers allocated and
are then stuffed on the cabq. Since with EAPOL frames being in TID 16
and queued to the BE queue, it's going to be waiting to be serviced
with all of the aggregate traffic going on - and if the CABQ gets
emptied beforehand, those TID 16 multicast frames with sequence numbers
will go out beforehand.
Now, there's quite likely a bunch of "stuff happening slightly out of
sequence" going on due to the nature of the TX path (read: lots of
overlapping and concurrent ath_start() and ath_raw_xmit() calls going
on, sigh) but I thought I had caught them all and stuffed each TID TX
behind a lock (that lasted as long as it needed to in order to get
the frame onto the relevant destination queue - thus keeping things
in order.)
Unfortunately the last problem is the big one and I'm going to stare at
it some more. If it _is_
So this is a work around for now to ensure that EAPOL frames actually
make it out before any other stuff in the non-QoS TID and HOPEFULLY
before the CABQ gets active.
I'm now going to spend a little time in the TX path figuring out exactly
why the sender is rejecting things. There's two (well, three if you count
EAPOL contents invalid) possibilities:
* The sequence number is out of order (ie, something else like the multicast
traffic on CABQ) is going out first on TID 16;
* The CCMP IV is out of order (similar to above - but less likely, as the
TX key for multicast traffic is different to unicast traffic);
* EAPOL contents strangely invalid.
AP: Ubiquiti RSPRO, AR9160/AR9220 NICs
STA: Macbook Pro, Broadcom 11n NIC
getmq_read() and getmq_write() respectively, just like sys_kmq_timedreceive()
and sys_kmq_timedsend().
Sponsored by: FreeBSD Foundation
MFC after: 2 weeks
The requirement (implied by the KASSERT in tap_destroy) that the tap is
closed isn't valid; destroy_dev will block in devdrn while other threads
are in d_* functions.
Note: if_tun had the same issue, addressed in SVN revisions r186391,
r186483 and r186497. The use of the condvar there appears to be
redundant with the functionality provided by destroy_dev.
Sponsored by: ADARA Networks
Reviewed by: dwhite
MFC after: 2 weeks
Well, in theory we can pass those two flags, because O_RDONLY is 0,
but we won't be able to read from a descriptor opened with O_EXEC.
Update the comment.
Sponsored by: FreeBSD Foundation
MFC after: 2 weeks
If O_EXEC is provided don't require CAP_READ/CAP_WRITE, as O_EXEC
is mutually exclusive to O_RDONLY/O_WRONLY/O_RDWR.
Without this change CAP_FEXECVE capability right is not enforced.
Sponsored by: FreeBSD Foundation
MFC after: 3 days
lock may be held.
Kim reported that the TID lock wasn't held when ath_tx_update_clrdmask()
was called. Well, the underlying hardware TXQ for that TID.
I'm betting it's the cabq stuff. ath_tx_xmit_normal() can be called
for both real and software cabq. For software cabq, the real destination
txq is different to the txq. So, the lock check will fail.
Reported by: Kim Culhan <w8hdkim@gmail.com>
"genunix" This will requires us to modify externally created
DTrace scripts but makes logical sense for FreeBSD.
Requested by: rpaulo
MFC after: 2 weeks
offline in response to a INQUIRY command that does not retreive vital
product data(I personally have observed the behaviour on an Adaptec 2405
and a 5805). Force the peripheral qualifier to "connected" so that upper
layers correctly recognize that a disk is present.
This bug was uncovered by r216236. Prior to that fix, aac(4) was
accidentally clearing the peripheral qualifier for all inquiry commands.
This fixes an issue where passthrough devices were not created for
disks behind aac(4) controllers suffering from the bug. I have
verified that if a disk is not present that we still properly detect
that and not create the passthrough device.
Sponsored by: Sandvine Incorporated
MFC after: 1 week
as controlled by kern.random.sys.harvest.swi. SWI harvesting feeds into
the interrupt FIFO and each event is estimated as providing a single bit of
entropy.
Reviewed by: markm, obrien
MFC after: 2 weeks
entries with different security flavors are in the exports(5)
file. For that case, mountd replies with the security flavors
of the last entry and not the correct one for the client host.
This patch fixes that by storing separate copies of the flavors
for each host/net case, plus a default one for the case where
no hosts/nets are specified on an entry in the exports(5) file.
Unlike the patch in the PR, it replies with the security flavors
for the entry instead of merging the security flavors for all
the entries and replying with that.
Tested by: attila.bogar at linguamatics.com
PR: kern/164933
MFC after: 2 weeks
LUNs respectively. This removes a huge number of error messages
from CAM during bus scans.
Copied almost verbatim from mav's commit r237460.
Submitted by: Mike Tancsa <mike at sentex dot net>
MFC after: 3 days
immediately panics on boot with INVARIANTS enabled. The driver already
clearly expects to be able to recurse on this mutex - the main I/O
is always recursing on this lock.
Reported and tested by: Mike Tancsa <mike at sentex dot net>
MFC after: 1 week
This should eventually be unified with ATH_DEBUG() so I can get both
from one macro; that may take some time.
Add some new probes for TX and TX completion.
* use the correct frame status - although the completion descriptor is
the _last_ in the frame/aggregate, the status is currently stored in
the _first_ buffer.
* Print out ath_buf specific fields once, not per descriptor in an ath_buf.
umsX character device returns a read error. Update devd.conf rules
to use "DEVFS" events which are generated after that the umsX
character device node has been created/destroyed, and then there
should be no need for moused to wait up to 10 seconds for umsX to
be ready. Opening umsX should not fail except if the kernel is low
on memory. In that case the user can replug the USB mouse or use
"usbconfig" to reset the device. In case of USB mouse devices,
moused should neither retry to open its character device,
once the first read error has happened. This is an indication
of device detach.
MFC after: 1 week
