to the C99 style. At least, it is easier to read sysent definitions
that way, and search for the actual instances of sigcode etc.
Explicitely initialize sysentvec.sv_maxssiz that was missed in most
sysvecs.
No objection from: jhb
MFC after: 1 month
and bcmp are not the same thing. 'man bcmp' states that the return is
"non-zero" if the two byte strings are not identical. Where as,
'man memcmp' states that the return is the "difference between the
first two differing bytes (treated as unsigned char values" if the
two byte strings are not identical.
So provide a proper memcmp(9), but it is a C implementation not a tuned
assembly implementation. Therefore bcmp(9) should be preferred over memcmp(9).
Reverse the direction of pmap_promote_pde()'s traversal over the specified
page table page. The direction of the traversal can matter if
pmap_promote_pde() has to remove write access (PG_RW) from a PTE that
hasn't been modified (PG_M). In general, if there are two or more such
PTEs to choose among, it is better to write protect the one nearer the
high end of the page table page rather than the low end. This is because
most programs access memory in an ascending direction. The net result of
this change is a sometimes significant reduction in the number of failed
promotion attempts and the number of pages that are write protected by
pmap_promote_pde().
MFamd64 SVN rev 179777 CVS rev 1.621
Tweak the promotion test in pmap_promote_pde(). Specifically, test PG_A
before PG_M. This sometimes prevents unnecessary removal of write access
from a PTE. Overall, the net result is fewer demotions and promotion
failures.
core of this change generalizes the initial page directory setup so that
the kernel can be given arbitrarily large or small.
- small formatting fixes
- update copyright
MFC after: 1 month
so the benefit of having acpi.ko as a standalone module is outweighed by
the complications of drivers compiled into the kernel not including ACPI
attachments by default.
Discussed on: current
On the i386 architecture, the processor only saves the current value
of `%esp' on stack if a privilege switch is necessary when entering
the interrupt handler. Thus, `frame->tf_esp' is only valid for
an entry from user mode. For interrupts taken in kernel mode, we
need to determine the top-of-stack for the interrupted kernel
procedure by adding the appropriate offset to the current frame
pointer.
Reported by: kris, Fabien Thomas
Tested by: Fabien Thomas <fabien.thomas at netasq dot com>
the same vmspace, decrement the reference count of the shared LDT instead
of a newly-made copy. Code factually removed LDT from the process that
did rfork(0).
Introduce user_ldt_deref() function that does decrement of refcount for
the struct proc_ldt, and call it in the rfork(0) case on the shared LDT.
Reviewed by: jhb
MFC after: 1 week
The user_ldt_free() function shall return with dt_lock unlocked.
Error handling code in both functions do not handle this, fix it by
doing necessary lock/unlock.
While there, fix minor style nits.
MFC after: 1 week
code. We only attempt a single reset using this method (a "hard" reset),
and we use two writes to ensure there is a 0 -> 1 transition in bit 2 to
force a reset.
MFC after: 1 week
memory-mapped config access. Add a workaround for these systems by
checking the first function of each slot on bus 0 using both the
memory-mapped config access and the older type 1 I/O port config access.
If we find a slot that is only visible via the type 1 I/O port config
access, we flag that slot. Future PCI config transactions to flagged
slots on bus 0 use type 1 I/O port config access rather than memory mapped
config access.
l_ucontext. To restore the registers content, trampoline needs to
dereference uc_mcontext instead of taking some undefined values from
l_ucontext.
Submitted by: Dmitry Chagin <dchagin@>
MFC after: 1 week
at least pass muster with the loader on 3.0.3
Note that this doesn't actually make it work as Xen 3.0.3
appears to disallow recursive mappings on the page directory
tables, then attempt to build a simple list containing just the high and
low frequencies based on the current CPU frequency calculated during boot
and the contents of the MSR.
MFC after: 1 month
timer. Previously, the various divisors were fixed which meant that while
it gave somewhat reasonable stathz, etc. at hz=1000, it went off the rails
with any other hz value. With these changes, we now pick a lapic timer hz
based on the value of hz. If hz is >= 1500, then the lapic timer runs at
hz. If 1500 hz >= 750, we run the lapic timer at hz * 2. If hz < 750, we
run at hz * 4. We compute a divider at runtime to make stathz run as close
to 128 as we can since stathz really wants to be run at something close to
that frequency. Profiling just runs on every clock tick. So some examples:
With hz = 100, the lapic timer now runs at 400 instead of 2000. stathz
will be 133, and profhz = 400. With hz = 1000 (default), the lapic timer
is still at 2000 (as it is now), stathz is at 133 (as it is now), and
profhz will be 2000 (previously 666).
MFC after: 2 weeks
- Rename pciereg_cfgopen() to pcie_cfgregopen() and expose it to the
rest of the kernel. It now also accepts parameters via function
arguments rather than global variables.
- Add a notion of minimum and maximum bus numbers and reject requests for
an out of range bus.
- Add more range checks on slot/func/reg/bytes parameters to the cfg reg
read/write routines. Don't panic on any invalid parameters, just fail
the request (writes do nothing, reads return -1). This matches the
behavior of the other cfg mechanisms.
- Port the memory mapped configuration space access to amd64. On amd64
we simply use the direct map (via pmap_mapdev()) for the memory mapped
window.
- During acpi_attach() just after loading the ACPI tables, check for a
MCFG table. If it exists, call pciereg_cfgopen() on each subtable
(memory mapped window). For now we only support windows for domain 0
that start with bus 0. This removes the need for more chipset-specific
quirks in the MD code.
- Remove the chipset-specific quirks for the Intel 5000P/V/Z chipsets
since these machines should all have MCFG tables via ACPI.
- Updated pci_cfgregopen() to DTRT if ACPI had invoked pcie_cfgregopen()
earlier.
MFC after: 2 weeks
and 5000P/V/Z chipsets.
- If the base address of the config space BAR is above 4GB for some reason
and this isn't a PAE kernel, then warn about this (under bootverbose)
and don't use the BAR.
PR: kern/126525
Submitted by: Arthur Hartwig @ Nokia
MFC after: 2 weeks
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
