limited in the amount of data they can handle at once.
Drivers can set ifp->if_hw_tsomax before calling ether_ifattach() to
change the limit.
The lowest allowable size is IP_MAXPACKET / 8 (8192 bytes) as anything
less wouldn't be very useful anymore. The upper limit is still at
IP_MAXPACKET (65536 bytes). Raising it requires further auditing of
the IPv4/v6 code path's as the length field in the IP header would
overflow leading to confusion in firewalls and others packet handler on
the real size of the packet.
The placement into "struct ifnet" is a bit hackish but the best place
that was found. When the stack/driver boundary is updated it should
be handled in a better way.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week (using spare struct members to preserve ABI)
cacos, cacosf, cacosh, cacoshf,
casin, casinf, casinh, casinhf,
catan, catanf, catanh, catanhf,
logl, log2l, log10l, log1pl
I am hoping kargl@ will commit expl and expm1l soon, in which case this
bump will cover those, too.
Requested by: danfe
long double versions don't pass yet. (They are rather nit-picky cases,
so there's ongoing discussion with Bruce about whether it is worth the
performance cost.)
space, fork(2) would cause shadowing of the physical object and
copying of the shared page into private copy, effectively preventing
updates for the exported timehands structure and stopping the clock.
Specify the maximum allowed permissions for the page to be read and
execute, preventing write from the user mode.
Reported and tested by: <huanghwh@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
identified, unify the code of check_deferred_signal() for all
architectures, making the variant under #ifdef x86 common.
Tested by: marius (sparc64)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
used as the estimation of size, to 32GB. This provides around 100K of
buffer headers and corresponding KVA for buffer map at the peak.
Sizing the cache larger is not useful, also resulting in the wasting
and exhausting of KVA for large machines.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
clearing the page's PGA_REFERENCED flag. Since we are typically
manipulating the page's act_count field when we are clearing its
PGA_REFERENCED flag, the page lock is already held everywhere that we clear
the PGA_REFERENCED flag. So, in fact, this revision only changes some
comments and an assertion. Nonetheless, it will enable later changes to
object locking in the pageout code.
Introduce vm_page_assert_locked(), which completely hides the implementation
details of the page lock from the caller, and use it in
vm_page_aflag_clear(). (The existing vm_page_lock_assert() could not be
used in vm_page_aflag_clear().) Over the coming weeks, I expect that we'll
either eliminate or replace the various uses of vm_page_lock_assert() with
vm_page_assert_locked().
Reviewed by: attilio
Sponsored by: EMC / Isilon Storage Division
display a global instead of the passed-argument; however since the global
always has the same value as the passed argument, it made no difference in
the realtime operation.
caused by the standard (and correct) behavior of the shell to discard the
return status of lvalue-operands in a pipe-chain.
The solution is to not pipe the file-acquisition directly into sort(1) but
instead store the output (allowing immediate testing of the return status)
and later sort it.
edge-case. The case was that you have been through the FTP setup once before
and on the second time through, you cancel at the re-selection of a new FTP
server.
The spurious warning was "device_media: not found" and was caused because
the underlying call to f_device_network_down() did not check to see if the
network device existed before attempting to shut it down.
Add checks to make sure we don't forge ahead unless the device exists.
make their purpose more clear by their names:
f_dialog_input_change() and
f_dialog_input_expire()
Are now (respectively):
f_dialog_input_expire_password() and
f_dialog_input_expire_account()
Upon revisit to this portion of code, the former names were too confusing.
behavior(s); e.g., `-Xd' versus `-dX' did not produce the same results.
The libraries common.subr and dialog.subr automatically process the
arguments passed to the program and enable/disable functionality without the
need to process the arguments within your program. For example, if "$@"
contains `-d', common.subr will see this and enable debugging regardless of
whether you process "$@" yourself or not (this automatic processing can
easily be disabled for custom scripts that don't want it; see the afore-
mentioned scripts for additional details).
NOTE: common.subr stores a copy of "$@" in $ARGV for convenient (and
repeated) processing by libraries such as dialog.subr which provide such
transparent functionality for the consuming script(s).
However, the libraries don't know if a program wants to accept `extra'
options. Flags are not really a problem, because the library can be
programmed to silently ignore unknown flags. The trouble comes into play
when the program wants to define an option that takes an argument.
For example:
bsdconfig -D logfile -X
In the above example, the library uses getopts to process $ARGV and if it
doesn't know that `-D' takes an argument, the option processing will
prematurely terminate on `logfile' (this is standard/correct behavior for
getopts but is undesired in our situation where we have partially off-loaded
main argument processing).
The problem is solved by allowing the program to define an extra set of
options to be included in each library's handling of $ARGV. Only options
that require arguments are truly necessary to be pre-specified in this new
manner.
invocation. Specifically, "top-load" your arguments and in the order in-
which they will be displayed. For example, many [if not all] widgets display
information in the following order, top-to-bottom (visually):
+ backtitle (displayed behind the widget at top-left)
+ title (at the top of the `window')
+ prompt text (just below the title and above whatever widget you choose)
+ Depending on widget, _one_ of the following:
- menu list
- radio list
- check list
- text input box with initial text
- [Xdialog(1)] 2x or 3x text input boxes
- [dialog(1)] a multi-part form
- progress bar
- etc. (many more widget choices)
+ buttons (right below the selected widget)
+ [dialog(1)] the hline (displayed at bottom of `window')
NOTE: Xdialog(1) accepts and silently ignores --hline
When building local arguments for your dialog invocation, if the value can't
be cleanly loaded into a local, add "# Calculated below" to the end of the
local declaration while retaining the block order of argument declarations.
Move other local declarations that are not associated with this top-loading
the dialog arguments to right-above where they are first-used.
Also, standardize on the names of the arguments. For example, always use
$prompt (instead of sometimes $msg and sometimes $prompt); use $menu_list
or $shell_list or $radio_list for those respective widgets; ad nauseum.
While we're doing this, flush-out full arguments for many invocations that
were passing NULL strings (making it unapparent if you were staring at this
one invocation what argument that NULL string was supposed to represent).
Last, while we're in startup/rcconf let's remove the unnecessary use of a
GLOBAL (RCCONF_MENU_LIST) for the menu_list.
and f_dialog_default_fetch(). Operating similar to functions introduced by
SVN r251236 and r251242, these functions operate as a pair for helping track
the default-item data (for the --menu, --checklist, and --radiolist
widgets).
This replaces the direct usage of a global to store the data with an
abstract method for readability and to centralize the code.
responsible for retrieving stored input (for the --inputbox and --password
widgets).
When we (Ron McDowell and I) developed the first version of bsdconfig, it
used temporary files to store responses from dialog(1). That hasn't been
true for a very long time, so the need to always execute some clean-up
function is long-deprecated. The function that used to perform these clean-
up routines for these widgets was f_dialog_inputstr().
We really don't need f_dialog_inputstr() for its originally designed purpose
as all dialog invocations no longer require temporary files.
Just as in r251236, redesign f_dialog_inputstr() in the following four ways:
1. Rename f_dialog_inputstr() to f_dialog_inputstr_fetch()
2. Introduce the new first-argument of $var_to_set to reduce forking
3. Create a corresponding f_dialog_inputstr_store() to abstract storage
4. Offload the sanitization to a new function, f_dialog_line_sanitize()
It should be noted that f_dialog_line_sanitize() -- unlike its cousin from
SVN r251236, f_dialog_data_sanitize() -- trims leading/trailing whitespace
from the user's input. This helps prevent errors and common mistakes caused
by the fact that the new cdialog implementation allows the right-arrow
cursor key to go beyond the last byte of realtime input (adding whitespace
at the end of the typed value).
While we're centralizing the sanitization, let's rewrite f_dialog_input()
while we're here to likewise reduce forking. The f_dialog_input() function
now expects the first argument of $var_to_set instead of producing results
on standard-out.
These changes greatly improve readability and also improve performance.
because different tests have different ideas about what it means to be
"close enough" to the right answer, depending on the properties of the
function being tested. In the process, I fixed some warnings and
added a few more 'volatile' hacks, which are sufficient to make all
the tests pass at -O2 with clang.
dtrace_probe(). Arguments beyond these five must be obtained in an
architecture-specific way; this can be done through the getargval provider
method, and through dtrace_getarg() if getargval isn't overridden.
This change fixes two off-by-one bugs in the way these arguments are fetched
in FreeBSD's DTrace implementation. First, the SDT provider must set the
aframes parameter to 1 when creating a probe. The aframes parameter controls
the number of frames that dtrace_getarg() will step over in order to find
the frame containing the extra arguments. On FreeBSD, dtrace_getarg() is
called in SDT probe context via
dtrace_probe()->dtrace_dif_emulate()->dtrace_dif_variable->dtrace_getarg()
so aframes must be 3 since the arguments are in dtrace_probe()'s frame; it
was previously being called with a value of 2 instead. illumos uses a
different aframes value for SDT probes, but this is because illumos SDT
probes fire by triggering the #UD fault handler rather than calling
dtrace_probe() directly.
The second bug has to do with the way arguments are grabbed out
dtrace_probe()'s frame on amd64. The code currently jumps over the first
stack argument and retrieves the rest of them using a pointer into the
stack. This works on i386 because all of dtrace_probe()'s arguments will be
on the stack and the first argument is the probe ID, which should be
ignored. However, it is incorrect to ignore the first stack argument on
amd64, so we correct the pointer used to access the arguments.
MFC after: 2 weeks
seven arguments.
The original test uses Solaris' uadmin system call to trigger the test
probe; this change adds a sysctl to the dtrace_test module and gets the test
program to trigger the test probe via the sysctl handler.
The test is currently failing on amd64 because of some bugs in the way that
probe arguments beyond the first five are obtained - these bugs will be
fixed in a separate change.
retrieving stored data (for the --menu, --calendar, --timebox, --checklist,
and --radiolist widgets).
When we (Ron McDowell and I) developed the first version of bsdconfig, it
used temporary files to store responses from dialog(1). That hasn't been
true for some very long time, so the need to always store the return status
of dialog(1) and then call some function to clean-up is long-deprecated. The
function that used to do the clean-up was f_dialog_menutag().
We really don't need f_dialog_menutag() for its originally designed purpose,
as all dialog invocations (even when in a sub-shell) do not use temporary
files anymore.
However, we do need to keep f_dialog_menutag() around because it still fills
the need of being able to abstract the procedure for fetching stored data
provided by functions that display the aforementioned widgets.
In re-designing f_dialog_menutag(), four important changes are made:
1. Rename f_dialog_menutag() to f_dialog_menutag_fetch()
2. Introduce the new first-argument of $var_to_set to reduce number of forks
3. Create a corresponding f_dialog_menutag_store() to abstract the storage
4. Offload the sanitization to a new function, f_dialog_data_sanitize()
NOTE: That last one is important. Not all functions need to store their data
for later fetching, meanwhile every invocation of dialog should be sanitized
(as we learned early-on in the i18n-effort -- underlying libraries will spit
warnings to stderr for bad values of $LANG and since dialog outputs its
responses to stderr, we need to sanitize every response of these warnings).
These changes greatly improve readbaility and also improve performance by
reducing unnecessary forking.
