only. This is a MAJOR incompatible change for the sparc64 platform,
but will not effect FreeBSD on other architectures.
Reviewed by: imp for UPDATING, freebsd-sparc for the change itself.
This may not be a generally valid configuration, but neither is relying
on the PCI clock to be stable.
The only currently known and supported hardware is the VPN14x1 from
Soekris, and since it has external clock, we fail safe(r) by using
it.
Unfortunately there is no way to probe this reliably.
Retire g_sanity() and corresponding debugflag (0x8)
Retire g_{stall,release}_events().
Under #ifdef DIAGNOSTIC:
Make g_valid_obj() an official function and have it return an an
non-zero integer which indicates the kind of object when found.
Implement G_VALID_{CLASS,GEOM,CONSUMER,PROVIDER}() macros based
on g_valid_obj().
Sprinkle calls to these macros liberally over the infrastructure.
Always check that we do not free a live object.
that I added recently:
- When a periodic timer fires, it's automatically re-armed. We must
make sure to re-arm the timer _before_ invoking any caller-supplied
defered procedure call: the DPC may choose to call KeCancelTimer(),
and re-arming the timer after the DPC un-does the effect of the
cancel.
- Fix similar issue with periodic timers in subr_ndis.c.
- When calling KeSetTimer() or KeSetTimerEx(), if the timer is
already pending, untimeout() it first before timeout()ing
it again.
- The old Atheros driver for the 5211 seems to use KeSetTimerEx()
incorrectly, or at the very least in a very strange way that
doesn't quite follow the Microsoft documentation. In one case,
it calls KeSetTimerEx() with a duetime of 0 and a period of 5000.
The Microsoft documentation says that negative duetime values
are relative to the current time and positive values are absolute.
But it doesn't say what's supposed to happen with positive values
that less than the current time, i.e. absolute values that are
in the past.
Lacking any further information, I have decided that timers with
positive duetimes that are in the past should fire right away (or
in our case, after only 1 tick). This also takes care of the other
strange usage in the Atheros driver, where the duetime is
specified as 500000 and the period is 50. I think someone may
have meant to use -500000 and misinterpreted the documentation.
- Also modified KeWaitForSingleObject() and KeWaitForMultipleObjects()
to make the same duetime adjustment, since they have the same rules
regarding timeout values.
- Cosmetic: change name of 'timeout' variable in KeWaitForSingleObject()
and KeWaitForMultipleObjects() to 'duetime' to avoid senseless
(though harmless) overlap with timeout() function name.
With these fixes, I can get the 5211 card to associate properly with
my adhoc net using driver AR5211.SYS version 2.4.1.6.
a static const global variable in ah_core.c. This makes it more clear
that this array does not require synchronization, as well as
synchronizing the layout to the ESP algorithm list. This is the
version of my patch that Itojun committed to the KAME tree.
Obtained from: me, via KAME
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
- Add encapmtx to protect ip_encap.c global variables (encapsulation
list).
- Unifdef #ifdef 0 pieces of encap_init() which was (and now really
is) basically a no-op.
- Lock encapmtx when walking encaptab, modifying it, comparing
entries, etc.
- Remove spl's.
Note that currently there's no facilite to make sure outstanding
use of encapsulation methods on a table entry have drained bfore
we allow a table entry to be removed. As such, it's currently the
caller's responsibility to make sure that draining takes place.
Reviewed by: mlaier
stf_destroy() to handle the common softc destruction path for the
two destruction sources: interface cloning destroy, and module
unload.
NOTE: sc_ro, the cached route for stf conversion, is not synchronized
against concurrent access in this change, that will follow in a future
change.
Reviewed by: pjd
Push if_faith softc destruction logic into faith_destroy() so that
it can be called after softc list removal in both the clone destroy
and module unload paths.
ndis_probe_pci() doesn't contain an entry for an IRQ resource, try to
force one to be routed to us anyway by adding an extra call to
bus_alloc_resource(). If this fails, then we have to abort the attach.
Patch provided by jhb, tweaked by me.
really sure why we have a softc list for if_loop, given that it
can't be unloaded, but that's an issue to revisit in the future as
corrupting the softc list would still cause panics.
Reviewed by: benno
Since there are two destroy paths for if_disc interfaces --
module unload and cloan interface destroy, create a new utility
function disc_destroy(), which is callded on a softc after it
has been removed from the global softc list; the cloaner and
module unload entry paths will both remove it before calling
disc_destroy().
Reviewed by: pjd
prevented newfs to work on volumes that are larger than 1TB.
PR: 63577
Submitted by: Masaki Takakashi <mtakahashi@se.gtd.cosmo.co.jp>
Approved by: grog (mentor), bde
least common multiple of all disks sector sizes.
This will allow to safely concatenate disks with different sector sizes.
- Mark unused function arguments.
- Other minor cleanups.
in the Memory Mapped Configuration Region (MMCR) to reset the CPU.
If CPU_ELAN is set, try this first to reset the CPU before the
traditional way.
Without this change, my Compulab board powers down on 'reset' instead
of rebooting.
This adds the former ports registered groups: proxy and authpf as well as
the proxy user. Make sure to run mergemaster -p in oder to complete make
installworld without errors.
This also provides the passive OS fingerprints from OpenBSD (pf.os) and an
example pf.conf.
For those who want to go without pf; it provides a NO_PF knob to make.conf.
__FreeBSD_version will be bumped soon to reflect this and to be able to
change ports accordingly.
Approved by: bms(mentor)
- security.bsd.hardlink_check_uid, when set, means, that unprivileged
users are not permitted to create hard links to files not
owned by them,
- security.bsd.hardlink_check_gid, when set, means, that unprivileged
users are not permitted to create hard links to files owned
by group they don't belong to.
OK'ed by: rwatson
ethernet (tested) and FDDI (not tested). The main use for this is on ADSL (or
other ATM) connections where bridged ethernet is used, PPPoE being a prime
example.
There is no manual page as yet, I will write one shortly.
Reviewed by: harti
that we (p1) are currently running, we hold a reference on p_textvp which
means the vnode cannot go away. p2 cannot run yet (and hence cannot exit)
so this should be safe to do at this point. As a bonus, it removes a
block of under-Giant code that was there to support the vref.
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
if_ndis.c has been split into if_ndis_pci.c and if_ndis_pccard.c.
The ndiscvt(8) utility should be able to parse device info for PCMCIA
devices now. The ndis_alloc_amem() has moved from kern_ndis.c to
if_ndis_pccard.c so that kern_ndis.c no longer depends on pccard.
NOTE: this stuff is not guaranteed to work 100% correctly yet. So
far I have been able to load/init my PCMCIA Cisco Aironet 340 card,
but it crashes in the interrupt handler. The existing support for
PCI/cardbus devices should still work as before.
- Push Giant down a bit in coredump() and call coredump() with the proc
lock already held rather than unlocking it only to turn around and
relock it.
Requested by: peter
process group and session dereferences. Also, check that p_pgrp and
p_sesssion are NULL before dereferencing them.
- Push down Giant in fork1().
Requested by: peter
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.
Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.
Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.
Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.
Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.
Tested by: Cy Schubert <Cy.Schubert AT komquats.com>
The previous logic meant that if a user sets it to a minimal cooling value
acpi_thermal will not use higher cooling levels. Reverse the logic so that
the user requesting a level (say, 2) also gets 0 - 1 also.
PR: kern/61592
Submitted by: Andrew Thompson <andy@fud.org.nz>
DIAGNOSTIC instead of INVARIANTS. INVARIANTS is intended for tests
that don't substantially change code flow or behavior (passive), but
this test required locking both the proc lock and scheduler lock
in order to execute. It also appears to be a very advisory diagnostic
as opposed to an invariant violation.
Following discussion with: bde
- completely unused things
- all of rev.1.102 (C++ support). <sys/cdefs.h> is included by the
prerequisite <sys/types.h>. __BEGIN_DECLS/__END_DECLS has no effect
(except possibly if undefined behaviour is invoked using a hack like
defining away __inline) since this header doesn't really support any
extern functions.
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
unnecessary and wrong. While it is necessary to verify that the page is
still free after dropping and reacquiring the free page queue lock, the
physical contiguity of the page can not change, making this check
unnecessary. This check was wrong in that it could cause an out-of-bounds
array access.
Tested by: rwatson
along with KeInitializeTimerEx(), KeSetTimer(), KeSetTimerEx(),
KeCancelTimer(), KeReadStateTimer() and KeInitializeDpc(). I don't
know for certain that these will make the Atheros driver happy since
I don't have the card/driver combo needed to test it, but these are
fairly independent so they shouldn't break anything else.
- Debugger() is present even in kernels without options DDB, so no
conditional compilation is necessary (pointed out by bde).
- Remove the extra km_acquirecnt member that I added to struct kmutant
and embed it within an unused portion of the structure instead, so that
we don't make the structure larger than it's defined to be in Windows.
I don't know what crack I was smoking when I decided it was ok to do
this, but it's worn off now.
than a style bug for the includes -- queue.h is a prerequisite for
_lock.h and _mutex.h but was included after them.
Removed bogus prototype for fget_locked(). The prototype was originally
needed to support K&R but was bogotified by converting the function header
to new-style.
always expects to be running on some MS OS. A survey of ASL shows that
this is the 2nd most common expected OS value. (1st is Win98 and we don't
emulate its buggy ACPI support.) Our ACPI support is similar to Win2k,
also. Put this behavior under ACPICA_PEDANTIC so we can get back to our
previous behavior for OSV testing.
even though the spec mandates this. Some have a value of 5 to indicate
throttling + C2 and some have 7 to indicate an extra C3 state. Support
throttling if the value is >= 4, C2 for >= 5, and C3 for >= 6.
routines to guard against problems caused by (possibly) buggy drivers.
The RealTek 8180 wireless driver calls NdisFreeBuffer() to release
some of its buffers _after_ it's already called NdisFreeBufferPool()
to destroy the pool to which the buffers belong. In our implementation,
this error causes NdisFreeBuffer() to touch stale heap memory.
If you are running a release kernel, and hence have INVARIANTS et al
turned off, it turns out nothing happens. But if you're using a
development kernel config with INVARIANTS on, the malloc()/free()
sanity checks will scribble over the pool memory with 0xdeadc0de
once it's released so that any attempts to touch it will cause a
trap, and indeed this is what happens. It happens that I run 5.2-RELEASE
on my laptop, so when I tested the rtl8180.sys driver, it worked fine
for me, but people trying to run it with development systems checked
out or cvsupped from -current would get a page fault on driver load.
I can't find any reason why the NDISulator would cause the RealTek
driver to do the NdisFreeBufferPool() prematurely, and the same driver
obviously works with Windows -- or at least, it doesn't cause a crash:
the Microsoft documentation for NdisFreeBufferPool() says that failing
to return all buffers to the pool before calling NdisFreeBufferPool()
causes a memory leak.
I've written to my contacts at RealTek asking them to check if this
is indeed a bug in their driver. In the meantime, these new sanity checks
will catch this problem and issue a warning rather than causing a trap.
The trick is to keep a count of outstanding buffers for each buffer pool,
and if the driver tries to call NdisFreeBufferPool() while there are still
buffers outstanding, we mark the pool for deletion and then defer
destroying it until after the last buffer has been reclaimed.
is set, since some drivers with debug info can be very chatty.
Also implement DbgBreakPoint(), which is the Windows equivalent of
Debugger(). Unfortunately, this forces subr_ntoskrnl.c to include
opt_ddb.h.
Sort acpi debug values. Change "disable" to "disabled" to match rest of
the kernel. Remove debugging from acpi_toshiba since it was only used for
probe/attach.
ifp is now passed explicitly to ether_demux; no need to look it up again.
Make mtag a global var in ip_input.
Noticed by: rwatson
Approved by: bms(mentor)
vm_page_free() is called. The problem with holding this lock is that it is
a spin lock and vm_page_free() may attempt the acquisition of a different
default-type lock.
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.
It would be nice to have more available, but segments lower than
this are reserved for either memory or 1:1 mapped device i/o,
and seg 15 is OpenFirmware ROM. Also, the effort to keep OpenFirmware
available for callbacks limits the use of VA-mapped segments.
Fortunately UMA_MD_SMALL_ALLOC takes away a lot of VM pressure.
Obtained from: NetBSD
include/ucontext.h
- remove trapframe and switch over to 'generic' description of machine
state. Include version field to help with future modifications.
Include floating point and altivec state, and hopefully align
correctly
powerpc/copyinout.c
- fill out casuptr() sync primitive, required by kern_umtx.c
powerpc/machdep.c
- shifted proc0/thread0/pcpu setup to before cninit, since
syscons -> make_dev -> devlock requires a valid curthread
- implemented get_mcontext/set_mcontext
- recast sendsig/sigreturn to use get/set_mcontext and new
ucontext struct. floating point now saved
- TODO: save/restore altivec state
powerpc/vm_machdep.c
- implemented cpu_thread_setup/cpu_set_upcall/cpu_set_upcall_kse
- eliminated trailing whitespace
Submitted by: Suleiman Souhlal <refugee@segfaulted.com>, ucontext by grehan
race in between sleepq_add() and sleepq_catch_signals() in that setting
td_wchan and TDF_SINTR is not atomic to sched_lock but only to the sleepq
lock. This band-aid will stop assertion failures, but there is perhaps a
larger problem with the sleepq_add/sleepq_catch_signals race that I am not
sure how to solve. For the signals case the race is harmless because we
always call cursig() after setting TDF_SINTR. However, KSE doesn't do
anything in sleepq_catch_signals() to check that this race was lost, so I
am unsure if this race is harmful for this specific abort.
to NET_UNLOCK_GIANT(). While they are used in similar ways, the
semantics are quite different -- NET_LOCK_GIANT() and NET_UNLOCK_GIANT()
directly wrap mutex lock and unlock operations, whereas drop/pickup
special case the handling of Giant recursion. Add a comment saying
as much.
Add NET_ASSERT_GIANT(), which conditionally asserts Giant based
on the value of debug_mpsafenet.
checking and freeing a different pointer that may or may not have been
assigned the same value. This should fix panics under load that were
recently reported.
serial console connections but not graphical consoles. This fixes the
graphical console machines. It leaves the initial promcons console
driver in place until a bit later in the boot sequence, delaying the
switch to the device drivers more appropriate for the machine's real
console setup. Note we still need the delayed make_dev() for promcons,
it does not have a proper bus interface so unlike other console drivers
it will not be found later during normal device discovery.
Tested by: sepotvin <at> videotron <dot> ca
Root cause explained by: grehan (-current)
Approved by: rwatson (mentor)
but a bit more reamins to be done. For now, it is usable.
PR:
Submitted by: Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
Reviewed by:
Approved by:
Obtained from:
MFC after:
functions in kern_socket.c.
Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".
Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.
Submitted by: sam
than a "waitok" argument. Callers now passing M_WAITOK or M_NOWAIT
rather than 0 or 1. This simplifies the soalloc() logic, and also
makes the waiting behavior of soalloc() more clear in the calling
context.
Submitted by: sam
