Unset VIS_SAFE flag as it turned out to be actually unsafe
for continuos top display as it's passing through sequences
resulting cursor movement (backspace, tab, carriage-return),
and explicitly set VIS_TAB for the same reason.
Reported by: Mark Millard <marklmi@yahoo.com>, swills
Tested by: Mark Millard <marklmi@yahoo.com>, swills
- Part of BAT payload location was lost due to invalid
BAT entry encoding type (32 bits instead of 64 bits)
- The sequence of PB/SB entries in BAT was broken due to
off-by-one index check. It worked for smaller than
4Gb because there were no SB entries in BAT.
MFC after: 1 day
Make sure we call fsync(2) on strip result
in case of "safecopy" and "strip -o tempcopy -- src"
before renaming tempcopy to destination.
MFC after: 3 weeks
X-MFC-With: r363064
Key changes include reduced noise at end of failed build log
and avoid evaluation of unnecessary terms in conditionals.
In META MODE; a target flagged .META is out-of-date if meta file
is missing
MFC after: 1 week
Also, make it not break if STRIPBIN points to strip version without -o support
and destination does not exist before installing.
Reported by: lwhsu
MFC after: 1 month
X-MFC-With: 363064
Make it not break if STRIPBIN points to strip version without -o support.
In that case, perform extra copy just like before r363064.
MFC after: 1 month
X-MFC-With: 363064
Currently, "install -s -S" behaviour is inefficient for upgrade.
First it finds that destination file already exists and copies
source file to temporary file. Then it calls strip(1)
with name of temporary file as single agrument and our strip(1) creates
another temporary file in the /tmp (or TMPDIR) making another copy
that is finally copied to DESTDIR third time.
Meantime, strip(1) has an option "-o dst" to specify destination
so install(1) is allowed to skip initial copying from obj to DESTDIR.
This change makes it do so.
Take a look at https://reviews.freebsd.org/D25551 for details
and efficiency numbers (in short: upto 32% gained for installword).
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D25551
Small EXAMPLES section showing the use of -s, -k and the different exit values
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25575
This version fixes a regression with regard to tradtional behavior of the
non-standard FreeBSD option "-e". In the previous version "-e quit" caused
bc to exit before any computations had been performed, since all -e option
parameters were concatenated and parsed as a whole, with quit causing the
program to exit as soon as it was parsed. This version parses and executes
commands passed with -e one by one and only exits after all prior commands
have been executed.
This commit is not a SVN merge, since the vendor import had been performed
after the import to contrib. Instead the contents of contrib/bc has been
removed and the new version is copied over unchanged from vendor/bc/dist.
* Small addition with four simple examples
* While here, remove three obsolete .Tn macros
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25462
* Add examples showing the use of -f, -C, -s, -n
* Rework the two already present examples that were *format* examples
* Remove .Tn suggested by mandoc(1)
* Remove reference to gdb(1) since it is not present in current
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25406
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
These implementations of the bc and dc programs offer a number of advantages
compared to the current implementations in the FreeBSD base system:
- They do not depend on external large number functions (i.e. no dependency
on OpenSSL or any other large number library)
- They implements all features found in GNU bc/dc (with the exception of
the forking of sub-processes, which the author of this version considers
as a security issue).
- They are significantly faster than the current code in base (more than
2 orders of magnitude in some of my tests, e.g. for 12345^100000).
- They should be fully compatible with all features and the behavior of the
current implementations in FreeBSD (not formally verified).
- They support POSIX message catalogs and come with localized messages in
Chinese, Dutch, English, French, German, Japanese, Polish, Portugueze,
and Russian.
- They offer very detailed man-pages that provide far more information than
the current ones.
The upstream sources contain a large number of tests, which are not
imported with this commit. They could be integrated into our test
framework at a latter time.
Installation of this version is controlled by the option "MK_GH_BC=yes".
This option will be set to yes by default in 13-CURRENT, but will be off
by default in 12-STABLE.
Approved by: imp
Obtained from: https://git.yzena.com/gavin/bc
MFC after: 4 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19982
* bugpoint.1
* clang.1
* llc.1
* lldb.1
* lli.1
* llvm-ar.1
* llvm-as.1
* llvm-bcanalyzer.1
* llvm-cov.1
* llvm-diff.1
* llvm-dis.1
* llvm-dwarfdump.1
* llvm-extract.1
* llvm-link.1
* llvm-mca.1
* llvm-nm.1
* llvm-pdbutil.1
* llvm-profdata.1
* llvm-symbolizer.1
* llvm-tblgen.1
* opt.1
Add newly generated manpages for:
* llvm-addr2line.1 (this is an alias of llvm-symbolizer)
* llvm-cxxfilt.1
* llvm-objcopy.1
* llvm-ranlib.1 (this is an alias of llvm-ar)
Note that llvm-objdump.1 is an exception, as upstream has both a plain
.1 file, and a .rst variant. These will have to be reconciled upstream
first.
MFC after: 3 days
-d and -v are not equivalent options. The former is more verbose than the
latter and the former does not actually send the signals while the latter does.
Let them have their own paragraphs.
From the point of view of the output, -v is equivalent to -s, so describe them
close to each other. The difference is that former actually sends the signals
and the latter doesn't.
PR: 247411
Approved by: manpages(0mp)
Differential Revision: https://reviews.freebsd.org/D25413
* Add four examples showing flags -e, -b, -d, -s
* Remove extra space at the end of the line reported by igor
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25426
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
Sort(1)'s radixsort implementation was broken for multibyte LC_CTYPEs in at
least two ways:
* In actual radix sort, it would only bucket the least significant
byte from each wchar, ignoring the 24 most-significant bits of each
unicode character.
* In degenerate cases / "fast paths," it would fall back to another
sorting algorithm (default: mergesort) with a bogus comparator
offset. The string comparison functions in sort(1) take an offset
in units of the operating character size. However, radixsort was
passing an offset in units of bytes. The byte offset must be
divided by sizeof(wchar_t).
This revision addresses both discovered issues.
Some example testcases:
$ (echo 耳 ; echo 脳 ; echo 耳) | \
LC_CTYPE=ja_JP.UTF-8 LC_COLLATE=C LANG=C sort --radixsort --debug
$ (echo 耳 ; echo 脳 ; echo 耳) | \
LC_CTYPE=C LC_COLLATE=C LANG=C sort --radixsort --debug
$ (for i in $(jot 34); do echo 耳耳耳耳耳; echo 耳耳耳耳脳; echo 耳耳耳耳脴; done) | \
LC_CTYPE=ja_JP.UTF-8 LC_COLLATE=C LANG=C sort --radixsort --debug
PR: 247494
Reported by: knu
MFC after: I do not intend to, but parties interested in stable might want to
* Add two small examples showing the use of -a, -c, -j and -N
* While here, remove obsolete .Tn reported by mandoc(1)
Approved by: 0mp@
Differential Revision: https://reviews.freebsd.org/D25372
Use locale-based string format specifiers when printing
the process names/arguments.
Reviewed by: pstef
Differential Revision: https://reviews.freebsd.org/D25174
* Add a small description before the EXAMPLES that are already in the man page
to explicitely state what we are trying to show instead of having the user
guess what the example is doing.
* Add two more examples to show usage of -s, -t and -f
* mandoc -Tlint reports irrelevant use of .Tn so remove them since according to
mdoc(7) it is there only for compatibility and should not be used in new
manuals.
Approved by: 0mp@
Add EXAMPLES covering -d, -n and -p
Include small explanation about the size of the chunks for the -n option
Approved by: 0mp
Differential Revision: https://reviews.freebsd.org/D25198
- Mention option's arguments in the list of options (so that now we mention
"-N system" instead of just "-N").
- Stylize signals and other constants like O_APPEND with Dv.
- Sort options.
- Change indentation width for readability.
- Fix a couple of typos.
- Sort symbols list.
- Use Sy instead of Cm for symbols. They are not command modifiers.
- Use Ex -std in the EXIT STATUS section for consistency with other manual
pages.
- Use Ql instead of Dq Li for inline code examples as Li has recently been
deprecated by mdoc.
Reviewed by: bcr
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25332
* Add pretty small EXAMPLES section
* While here, fix a warning in line 98 (new sentence in new line)
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25205
- Sort options in the list & indent for readability.
- Pet linters
- Use "\(em" instead of "--"
- Remove Tn macros
- Use Ql instead of Dq Li
- Add arguments to the -M, -N, -p, and -u options in their descriptions.
- Use Sy instead of Li for field names. Li is deprecated, and Ql makes no
sense here.
- Replace a literal block with a list for the table of special names
related to FD.
- Use Ql instead of ``X''.
- Add a dot after etc.
- Reference fuser(1).
MFC after: 1 week
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
ldd proclaims ET_DYN objects as shared libraries and tries to
dlopen(RTLD_TRACE) them to get dependencies. Since PIE binaries are
ET_DYN | DF_1_PIE, refusal to dlopen such binaries breaks ldd.
Fix it by reading and parsing dynamic segment looking for DF_FLAG_1
and taking DF_1_PIE into account when deciding between binary and
library.
Reported by: Dewayne Geraghty <dewayne@heuristicsystems.com.au>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25257
-V is OpenBSD specific, use -version instead.
While here, fix issue reported by mandoc lint and drop nonexistent
script(7) reference.
PR: 247004
Reviewed by: 0mp, markj
Differential Revision: https://reviews.freebsd.org/D25164
Add EXAMPLES covering options I, J, L, n, P.
While here, fix warning (STYLE: no blank before trailing delimiter: Fl P,)
Bumping .Dd
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25214
This patch teaches sed to interpret a "-" in a special way when given
as an argument to the -f flag.
This behavior is also present in GNU sed.
PR: 244872
Tested by: antoine (exp-run)
Reviewed by: pfg, tobik (older version)
Approved by: pfg (src)
Relnotes: yes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24079
VHDX is the successor of Microsoft's VHD file format. It increases
maximum capacity of the virtual drive to 64TB and introduces features
to better handle power/system failures.
VHDX is the required format for 2nd generation Hyper-V VMs.
Reviewed by: marcel
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25184
An EXAMPLE section was adding with some basic examples that show the use of
uniq(1) with various flags.
Submitted by: fernape@
Approved by: bcr@
MFC after: 4 days
Relnotes: yes (EXAMPLE section for uniq(1))
Differential Revision: https://reviews.freebsd.org/D25149
Somewhat predictably, software often wants to use \x27/\x24 among others so
that they can decline worrying about ugly escaping, if said escaping is even
possible. Right now, this software is using these and getting the wrong
results, as we'll interpret those as x27 and x24 respectively. Some examples
of this, when an exp-run was ran, were science/octopus and misc/vifm.
Go ahead and process these at all times. We allow either one or two digits,
and the tests account for both. If extra digits are specified, e.g. \x2727,
then the third and fourth digits are interpreted literally as one might
expect.
PR: 229925
MFC after: 2 weeks
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
summary of changes, or for a more thorough overview:
https://subversion.apache.org/docs/release-notes/1.14
NOTE: there is no need to dump and reload repositories, and the working
copy format is still the same as Subversion 1.8 through 1.13.
Relnotes: yes
MFC after: 2 weeks
X-MFC-With: r361677
When -N is used the missing files are treated as empty.
PR: 233402
Submitted by: Fehmi Noyan Isi <fnoyanisi@yahoo.com>
Reported by: Roman Neuhauser <roman@sigpipe.cz>
MFC after: 3 days
Differential Revision: D25081
Various options to "diff(1)" show filenames, and traditionally make use of the
"--label" parameter, if set.
Restore this behaviour in BSD diff.
While here add a regression test
PR: 244533
Submitted by: Jamie Landeg-Jones <jamie@catflap.org>
MFC after: 3 days
This is consistent with what we are doing for close(2) and it makes
it a bit easier to follow when debugging file descriptor operations.
i.e. many other syscalls are decoding fds as integers rather than
base 16 numbers.
MFC after: 1 week
Changes since 20181221 are mostly portability related
hence the large gap in versions imported.
There are however some bug fixes, and a rework of filemon handling.
In NetBSD make/filemon/filemon_ktrace.c allows use of fktrace
and elimination of filemon(4) which has not had the TLC it needs.
FreeBSD filemon(4) is in much better shape, so bmake/filemon/filemon_dev.c
allows use of that, with a bit less overhead than the ktrace model.
Summary of changes from ChangeLog
o str.c: empty string does not match % pattern
plus unit-test changes
o var.c: import handling of old sysV style modifier using '%'
o str.c: refactor brk_string
o meta.c: meta_oodate, CHECK_VALID_META is too aggressive for CMD
a blank command is perfectly valid.
o meta.c: meta_oodate, check for corrupted meta file
earlier and more often.
* meta.c: meta_compat_parent check for USE_FILEMON
patch from Soeren Tempel
o meta.c: fix compat mode, need to call meta_job_output()
o job.c: extra fds for meta mode not needed if using filemon_dev
o meta.c: avoid passing NULL to filemon_*() when meta_needed()
returns FALSE.
o filemon/filemon_{dev,ktrace}.c: allow selection of
filemon implementation. filemon_dev.c uses the kernel module
while filemon_ktrace.c leverages the fktrace api available in
NetBSD. filemon_ktrace.c can hopefully form the basis for
adding support for other tracing mechanisms such as strace on
Linux.
o meta.c: when target is out-of-date per normal make rules
record value of .OODATE in meta file.
o parse.c: don't pass NULL to realpath(3)
some versions cannot handle it.
o parse.c: ParseDoDependency: free paths rather than assert
plus more unit-tests
Update libarchive to 3.4.3
Relevant vendor changes:
PR #1352: support negative zstd compression levels
PR #1359: improve zstd version checking
PR #1348: support RHT.security.selinux from GNU tar
PR #1357: support for archives compressed with pzstd
PR #1367: fix issues in acl tests
PR #1372: child handling cleanup
PR #1378: fix memory leak from passphrase callback
Apparently, when the -u, -i and -I options where added to sed(1), it was
forgotten to add them to both lines in the SYNOPSIS section. They were only
added to the second line, although they apply to both.
With the updated SYNOPSIS, it is now allowed (and consistent) to run:
sed -i BAK s/foo/bar/g some_file
PR: 240556
Submitted by: Oliver Fromme
MFC after: 5 days
Using UI units allows to fit larger numbers in columns.
Stop calling v_page_size - this is a value that doesn't change at runtime.
Renamed WINDOW *wnd to *wd to avoid conflict with global *wnd variable.
Use bit-shift to convert page size to byte.
PR: 246458
Submitted by: ota@j.email.ne.jp
MFC after: 2 weeks
Differential Revision: D24834
was one of the additions in PWB, and appeared in System III and later commercial
versions of Unix. The different args to uname weren't aded until System III. Add
a quick note to note the late entry into the BSD fork of Unix since PWB
otherwise implies a pre-fork date.
elfctl has been merged to stable/12, and so will appear in FreeBSD 12.2
Reported by: Dewayne Geraghty
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Examples of depecrated algorithms in manual pages and sample configs
are updated where relevant. I removed the one example of combining
ESP and AH (vs using a cipher and auth in ESP) as RFC 8221 says this
combination is NOT RECOMMENDED.
Specifically, this removes support for the following ciphers:
- des-cbc
- 3des-cbc
- blowfish-cbc
- cast128-cbc
- des-deriv
- des-32iv
- camellia-cbc
This also removes support for the following authentication algorithms:
- hmac-md5
- keyed-md5
- keyed-sha1
- hmac-ripemd160
Reviewed by: cem, gnn (older verisons)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24342
This may happen, for instance, if one happens to have an alias of diff to
diff -up and attempts to specify the amount of context on top of that.
Aliases like this may cause other problems, but if they're really not ever
generating non-unified diffs then we should at least not break that
use-case.
In addition, we'll now pick up a format mismatch if -p is specified with
!contextual && !unified && !unset.
Fix up a small trailing whitespace nit in the tests while we're here, and
add tests to make sure that we can double up all the formatting options.
Reported by: jbeich
MFC after: 3 days
Attach sockstat -j to the specified jail if the jail is in a new vnet.
Otherwise we do not see all sockets belonging to the jail.
Reviewed by: jamie
Approved by: mmacy (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24413
It turns out that currently mandoc(1) is not handling Fl in Ss
correctly (maybe it never was). Let's just replace "Fl S \&Ss ..."
with "-S ...". After all, this subsection title is stylized anyway, so Fl
is not that helpful.
MFC after: 2 weeks
This matches GNU diff(1) behavior and, more importantly, eliminates any
source of confusion if multiple formatting options are specified.
Note that the committed diff differs slightly from the submitted: I've
modified it so that we initialize diff_format to something that isn't an
accepted format option so that we can also reject --normal -c and -c
--normal, which would've otherwise been accepted because the default was
--normal. After option parsing we default it to D_NORMAL if it's still
unset.
PR: 243975
Submitted by: fehmi noyan isi
MFC after: 1 week
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
instead of sprinkling them out over many disjoint files. This is a follow-up
to achieve the same goal in an incomplete rev.348521.
Approved by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20520
The ugly stick here is this bit in the respective headers:
#ifndef EXTERN
#define EXTERN extern
#endif
with a follow-up #define EXTERN in a single .c file to push all of their
definitions into one spot. A pass should be made over these three later to
push these definitions into the correct files instead, but this will suffice
for now and at a more leisurely pace.
MFC after: 3 days
Spread the globals far and wide, hopefully to the files that make the most
sense.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
The kyua.conf from examples doesn't match the expected config and
contains a lot of undesirable entries such as setting the architecture
to amd64 explicitly.
Reported by: arichardson (missing config)
Reviewed by: emaste
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D24267
calendar(1) syntax is not capable of representing the rules for the
US Election Day. The hardcoded date was set in r15066 in 1996 and
hasn't changed since then.
PR: 173389
Reported by: Steve Ames <steve@energistic.com>
MFC after: 1 week
Both the result of the first_dayofweek_of_year and the target
weekday are zero-based (0 fo sunday) while the target month-day
or year-day is 1-based. Adjust logic accordingly.
Also add testcase for this PR to the kyua test suite
PR: 201062
Submitted by: Richard Narron <comet.berkeley@gmail.com>
MFC after: 1 week
"Latin".
Arguably the entire -p option should be removed. It shows only a few
countries, and it doesn't have any relationship with the rest of the
program.
PR: 244801
Submitted by: grog@
Reported by: Hamid Ali
As noted by brooks/emaste, this is the wrong approach to take.
Revert the changes so brooks can apply a more proper change.
Requested by: brooks, emaste
kd is already properly declared in extern.h and defined in main.c, rendering
this definition useless. This fixes the -fno-common build.
MFC after: 3 days
These manpages were meant to be templated once per `configure` run.
Given that we're not bound by as many constants, e.g., `--prefix` isn't
generally changing for kyua in the base system, having to generate the
manpages each build seems slightly less than optimal.
In the event that one's build environment doesn't define `$SH`, the build
will also fail until this change is introduced.
Instead of jumping through hoops dealing with shells or permissions, let's
just cut to the chase and check the generated copies into the sourcebase
under usr.bin/kyua .
MFC with: r359260
Reported by: Julian Stacey <jhs@berklix.com>
The "kyua about" command assumes these files exist causing tests
supplied devel/kyua to fail.
Fix a bug defining the default KYUA_DOCDIR so the installed files can be
found.
Reported by: jenkins tests
Reviewed by: lwhsu
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24187
Having kyua in the base system will simplify automated testing in CI and
eliminates bootstrapping issues on new platforms.
The build of kyua is controlled by WITH(OUT)_TESTS_SUPPORT.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24103
There is an example in tail(1) manual page explaining how to use tail(1) to
track the contents of /var/log/messages. The example uses the -f flag to
follow the file. The problem with the -f flag is that it cannot handle the
situation where /var/log/messages is rotated. Hence, use -F instead in the
example.
Reviewed by: asomers
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24157
It turns out that units(1) is not as horrible to use in scripts
as I initially thought. When the --terse flag is combined
with an appropriate output format (set via --output-format),
units(1) is actually capable of producing very nice results.
For example:
units -o %0.f -t '4 gigabytes' bytes
is is just going to print out the expected value of 4294967296.
There is no time to waste. People have to know about it.
I am adding an example for this at the top of the examples section
because this is what users are most likely looking for.
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D24096
These have an educational value and are, no doubt, an integral part of the fun
behind running the BSDs.
PR: 242909, 242918
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23581
In order to determine the type of a compressed file, we have to read
in the first four bytes which may also be important for decompression
purposes, to do that we would pass the buffer that we have already
read in, along with the size of it.
Rename header1 to fourbytes to make that explicit, and remove all
checks for prelen.
Reported by: cem
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24034
Clang from 9.0.0 onwards already has the necessary relocation range
extenders, so this workaround is no longer needed (it produces longer
and slower code). Tested on real hardware, and in cross-compile
environment.
Submitted by: mmel
This will be used to tag binaries that require W+X mappings, in advance
of the ability to prevent W^X in mmap/mprotect.
There is still some discussion about the flag's name, but the ABI won't
change even if the name does (as kib pointed out in the review).
Reviewed by: csjp, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23909
Add four new counters for ND6 related Anti-DoS measures.
We split these out into a separate upfront commit so that we only
change the struct size one time. Implementations using them will
follow.
PR: 157410
Reviewed by: melifaro
MFC after: 2 weeks
X-MFC: cannot really MFC this without breaking netstat
Sponsored by: Netflix (initially)
Differential Revision: https://reviews.freebsd.org/D22711
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
The windowsize option permits multiple blocks to be transmitted
before the receiver sends an ACK improving throughput for larger
files.
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23836
Hexdump test was failling on big endian systems when testing decimal, octal
and hexa outputs as the tests were designed on a little endian system. This
revision adds the two distinct flavors of output expected and determines at
runtime which to compare against.
Submitted by: Renato Riolino <renato.riolino_eldorado.org.br>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23191
GCC points out a couple levels down in convert_to_features that this may be
used uninitialized. Indeed, this is true- initialize it to NULL so that we
at least deref a null pointer.
elfctl is a tool for modifying the NT_FREEBSD_FEATURE_CTL ELF note,
which contains a set of flags for enabling or disabling vulnerability
mitigations and other features.
Reviewed by: csjp, kib
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23910
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
As described in Warner's email message[1] to the FreeBSD-arch mailing
list we have reached GCC 4.2.1's retirement date. At this time all
supported architectures either use in-tree Clang, or rely on external
toolchain (i.e., a contemporary GCC version from ports).
GCC 4.2.1 was released July 18, 2007 and was imported into FreeBSD later
that year, in r171825. GCC has served us well, but version 4.2.1 is
obsolete and not used by default on any architecture in FreeBSD. It
does not support modern C and does not support arm64 or RISC-V.
Thanks to everyone responsible for maintaining, updating, and testing
GCC in the FreeBSD base system over the years.
So long, and thanks for all the fish.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2020-January/019823.html
PR: 228919
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23124
Since we don't set opterr to 0, getopt prints a message when it
encounters an unknown/invalid option. We therefore don't need to
print our own message in the default handler.
Reviewed by: kevans, theraven
Differential Revision: https://reviews.freebsd.org/D23662
realpath(3) is used a lot e.g., by clang and is a major source of getcwd
and fstatat calls. This can be done more efficiently in the kernel.
This works by performing a regular lookup while saving the name and found
parent directory. If the terminal vnode is a directory we can resolve it using
usual means. Otherwise we can use the name saved by lookup and resolve the
parent.
See the review for sample syscall counts.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23574
This is the kdump counterpart of the truss support added in r358116, and
also a part of D23733. shm_open2 is the successor to shm_open.
Reviewed by: kaktus
shm_open2 is similar to shm_open, except it also takes shmflags and optional
name to label the anonymous region for, e.g., debugging purposes.
The appropriate support for decoding shmflags was added to libsysdecode in
r358115.
This is a part of D23733.
Reviewed by: kaktus
The first argument to shm_open(2) as well as shm_open2(2) may be a path or
SHM_ANON. Decode SHM_ANON, at least- paths will show up as namei results in
kdump output, which may be sufficient; in those cases, we'll have printed an
address.
Future commits will add support for shm_open2() to libsysdecode/truss/kdump.
Reported by: kaktus
MFC after: 3 days
This includes a small battery of /memreserve/ fixes to make sure dtc is
properly writing these regions into the output file and reading them back
out.
As of this update, dtc will now also assume common defaults for -I/-O if
only one is specified; namely, dts for one implies dtb for the other and
vice versa (Requested by: jhibbits, preserves GPL dtc behavior too).
MFC after: 1 week
--tabsize was previously listed as optional_argument, but didn't account for
the optionality of it in the argument handling. This is irrelevant -- the
manpage doesn't indicate that the argument is optional, and indeed there's
no clear interpretation of omitting the argument because there's no other
side effect of --tabsize.
The "malformed" argument part of the header on this message is simply
referring to usage like this:
% diff --tabsize 4 A B
With an optional_argument, the argument must be attached to the parameter
directly (e.g. --tabsize=4), so the argument is effectively NULL with the
above invocation as if no argument had been passed.
PR: 243974
Submitted by: fehmi noyan isi <fnoyanisi yahoo com> (diff.c portion)
MFC after: 3 days
- Long options must be stylized with the Fl macro as well.
Reviewed by: bapt
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23642
Update libarchive to 3.4.2
Relevant vendor changes:
PR #1289: atomic extraction support (bsdtar -x --safe-writes)
PR #1308: big endian fix for UTF16 support in LHA reader
PR #1326: reject RAR5 files that declare invalid header flags
Issue #987: fix support 7z archive entries with Delta filter
Issue #1317: fix compression output buffer handling in XAR writer
Issue #1319: fix uname or gname longer than 32 characters in pax writer
Issue #1325: fix use after free when archiving hardlinks in ISO9660 or XAR
Use localtime_r() and gmtime_r() instead of localtime() and gmtime()
X-MFC-With: r356212,r356365,r356416
MFC after: 1 week
The intent is to provide bsd-specific flags relevant to interpreter
and C runtime. I did not want to reuse AT_FLAGS which is common ELF
auxv entry.
Use bsdflags to report kernel support for sigfastblock(2). This
allows rtld and libthr to safely infer the syscall presence without
SIGSYS. The tunable kern.elf{32,64}.sigfastblock blocks reporting.
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
Remove the long obsolete elf2aout utility. Should any ports need to
know when this left the tree, use 1300077 as the revision so we
avoid multiple bumps for the sparc64 removal.
Reviewed by: brooks@, emaste@
Differential Revision: https://reviews.freebsd.org/D23527
Only sparc64 used this, so we will be removing it from FreeBSD 13. Add
the usual deprecation notice in a MFC-able way.
Reviewed by: emaste, rgrimes
Differential Revision: https://reviews.freebsd.org/D23526
file could reasonably be NULL here if we we're using stdin. Albeit less
likely in normal usage, one could actually hit either of these warnings on
stdin.
ubmitted by: sigsys@gmail.com
MFC after: 3 days
This allows one to set the environment of the specified user either from
login.conf alone (-L) or both login.conf and ~/.login_conf if present (-U).
This is a supporting feature to allow service(8) to pull in the environment
of the "daemon" class before invoking the rc script.
This is a part of D21481.
Submitted by: Andrew Gierth < andrew_tao173.riddles.org.uk>
This is a sensible default used by, e.g., cron(8), and useful if one wanted
to honor it.
This is a part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
This allows it to be easily suppressed in, e.g., the "daemon" class where it
will not be properly expanded.
This is a part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Changes to units.1:
- Change the description to a more descriptive "conversion calculator".
- Sort options.
- Split the description into sections to make it easier to navigate the
manual page.
- Improve the description of various options.
- Document the default value of the output format.
- Use more mdoc macros for better readability.
- Document the behavior of the PATH environmental variable.
- Improve examples.
- Add sections: EXIT STATUS, DIAGNOSTICS, and HISTORY.
- Document that units(1) cannot convert negative values and it handles long
unit lists poorly.
- Update the documentation of the -V flag to match the implementation.
units(1) prints its version and the units data file instead of its
version and usage information.
Changes to units.c:
- Update usage information.
- Sort longopts elements.
This commit does not attempts to change the current behavior of units(1).
What's left to do is probably defining a better versioning (at the moment
units(1) always reports "FreeBSD units" as its version) and changing the
behavior of the -V flag to only print version.
Reviewed by: allanjude (earlier version), bcr
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D18977
Disable new clang 10.0.0 warnings about misleading indentation in flex.
As this is contributed code with very messy indentation, which will
almost certainly never be upgraded, just disable the warning.
MFC after: 3 days
