Inludes minor changes relative to upstream, for compatibility with
FreeBSD's in-tree LLVM 3.3:
- Reverted LLDB r191806, restoring use of previous API.
- Reverted part of LLDB r189317, restoring previous enum names.
- Work around missing LLVM r192504, using previous registerEHFrames API
(limited functionality).
- Removed PlatformWindows header include and init/terminate calls.
Sponsored by: DARPA, AFRL
To avoid missing a chance to cancel thread, call _pthread_testcancel at the
beginning of _sem_timedwait.
Submitted by: Eric van Gyzen < eric at vangyzen dot net >
Add hwpmc(4) support for the PowerPC 970 class processors, direct events.
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.
Import libucl into head
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
When querying a process's umask via sysctl in libprocstat(), don't
print a warning if EPERM is returned as this is an expected failure
mode rather than error -- similar to current handling of ESRCH.
This makes the output of 'procstat -as' vastly more palatable.
Sponsored by: DARPA, AFRL
If rare conditions such as concurrent conflicting manipulation of the
filesystem occur, fts_read() frees the current FTSENT without adjusting
the pointers in the FTS accordingly. A later fts_close() then frees the
same FTSENT again.
- r260505 Allow tests to provide a Kyuafile when they relied on auto-generation.
- r260525 Respect the original layout of the atf-{c,c++} tests.
- r260526 Fix path to the process_helpers for the libatf-c++ tests.
- r260576 Generate and install pkg-config files for atf.
- r260577 Add atf pkg-config files from the vendor branch.
- r260584 Prevent misc_helpers from running as a test.
Import libc++ 3.4 release. This contains a lot of bugfixes, and some
preliminary support for C++1y.
MFC r261604:
HEAD is not buildable for the past day. Commit a 'quick fix' in order to permit
buildworld to complete.
Reviewed by: theraven
MFC r261608:
Apply a cleaner solution for the sign warnings that can occur when
compiling libc++'s <locale> header with -Wsystem-headers on.
This has also been submitted upstream.
Reported by: asomers
MFC r261801:
An ABI incompatibility crept into the libc++ 3.4 import in r261283. It
was caused by upstream libc++ commit r194536, which aimed to make the
headers more standards-compliant, by making std::pair's copy constructor
trivial. Unfortunately, this could cause certain C++ applications using
shared libraries built against the previous version of libc++ to crash.
Fix the ABI incompatibility by making std::pair's copy constructor
non-trivial again.
Please note: Any C++ applications or shared libraries built with libc++
between r261283 and this revision should be recompiled.
Reported by: stefanf
While it isn't too late and kvm_read_zpcpu() function isn't yet used
outside libkvm(3), change its order of arguments, so that it is the
same as in kvm_read().
Merge r261805 from head:
Add kvm_getncpus() to obtain mp_ncpus.
- Consistently pass around context information using a simple pointer.
This fixes some dereferencing bugs in Chinese character set conversions.
- Fix Simplified Chinese character set conversions by switching around the
fields of an internal struct so it corresponds with the way variables of
this type are initialised.
- Fix an array index out of bounds bug in iconv VIQR (Vietnamese) module.
- Silence gcc warning about unsigned comparison with 0.
Also record r258316 and r258587 as merged so they no longer show up as
eligible.
PR: 185964
Submitted by: Manuel Mausz <manuel-freebsd@mausz.at>
Merge from CheriBSD:
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
Sponsored by: DARPA, AFRL
Several changes to the local APIC support in bhyve:
- Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'.
- If a vcpu disables its local apic and then executes a 'HLT' then spin
down the vcpu and destroy its thread context. Also modify the 'HLT'
processing to ignore pending interrupts in the IRR if interrupts have
been disabled by the guest. The interrupt cannot be injected into the
guest in any case so resuming it is futile.
- Use callout(9) to drive the vlapic timer instead of clocking it on each
VM exit.
- When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP.
- Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.
- Fix the vlapic version register.
- Add a command to bhyvectl to inject an NMI on a specific vcpu.
- Add an API to deliver message signalled interrupts to vcpus. This allows
callers to treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
- Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to
'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively.
- Consolidate the virtual apic initialization in a single function:
vlapic_reset()
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Export table entries in the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
In _pthread_kill(), if passed pthread is current thread, do not send
the signal second time, by adding the missed else before if statement.
PR: threads/186309
The posix_fallocate(2) syscall should return error number on error,
without modifying errno.
MFC r261290:
The posix_madvise(3) and posix_fadvise(2) should return error on
failure, same as posix_fallocate(2).
Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
Similar to the (1 << 31) case it is not defined to do (2 << 30).
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Several enhancements to the I/O APIC support in bhyve including:
- Move the I/O APIC device model from userspace into vmm.ko and add
ioctls to assert and deassert I/O APIC pins.
- Add HPET device emulation including a single timer block with 8 timers.
- Remove the 'vdev' abstraction.
Approved by: neel
Split the last gcc-specific flags off into CFLAGS.gcc. This also
removes the need to use -Qunused-arguments for clang throughout the
tree.
MFC r260369:
Apply band-aid for 32-bit compat libs failures after r260334: put back
-Qunused-arguments for clang for now, until I can figure out a way to
make it unneeded in all scenarios. Sorry about the breakage.
Fix several bugs in sctp_bindx():
* Set errno to EAFNOSUPPORT if an address is provided which is neither
AF_INET nor AF_INET6.
* Don't modify the arguments.
* Don't smash the stack when provided with a non-zero port.
* Handle the case correctly where the first address provided is
an IPv6 address.
The compile time constant limit on number of swap devices was removed in 5.2.
As such, remove the EINVAL error saying so. Currently the vm.nswapdev sysctl
just represents the number of added swap devices.
Fix this build for clang.
MFC r259730:
To avoid having to explicitly test COMPILER_TYPE for setting
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC r259913:
For libstand and sys/boot, split off gcc-only flags into CFLAGS.gcc.
MFC r259927:
Fix pc98 build, by also forcing COMPILER_TYPE in sys/boot/pc98/boot2's
Makefile.
Pointy hat to: dim
This is a MFC into stable/10 of:
- r258286 Update notes for imports of atf.
- r258289 MFV: Import atf-0.18.
- r258290 Drop all ATF tools code.
This is "make tinderbox" clean as run on ref10-amd64 with the default
WITHOUT_TESTS option. A "make buildworld" with WITH_TESTS set now works
as well.
This is a MFC into stable/10 of:
- r257849 Add libatf-c++ to the prebuild libs.
- r257853 Build and install the atf tests.
- r258233 Move all atf directories to the tests mtree.
- r258285 Fix the build of some ATF tests.
This change is "make tinderbox" clean on ref10-amd64 with the default
settings of WITHOUT_TESTS. It is likely for the WITH_TESTS build to
still be broken because not all relevant changes have been merged yet.
This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.
Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.
Consistently add the relocation offset only when the ELF type is not
ET_EXEC. This fixes several problems with the DTrace pid provider not
being able to match probes.
Modify the libproc breakpoint add/remove functions to stop the target
process if it has not already been stopped, since this is required for
ptrace(2) to work.
libdtrace does not seem to stop target processes before trying to remove
their breakpoints, so we were previously failing to remove the breakpoint
on r_debug_state() in rtld. This was causing processes to die with SIGTRAP
if they called dlopen(3) after dtrace(1) had detached.
This is a MFC of:
- r256761 Clearly split the logic to build ATF and plain tests apart.
- r256762 Add the automatic generation of Atffile files.
- r256763 Add the automatic generation of Kyuafile files.
- r256764 Plug atf-run into the 'test' target.
- r256765 Plug kyua into the 'test' target.
- r257096 Move the TESTSBASE definition to bsd.own.mk.
- r257099 Add missing plain.test.mk.
- r258297 Remove registration of C++ test programs into PROGS.
- r258298 Fix the build of plain test programs.
- r258551 Install plain.test.mk.
- r259208 Add tap.test.mk.
Approved by: rpaulo (mentor)
MFC r256661:
Fix the libproc build when DEBUG is defined.
MFC r257222:
Clean up the debug printing in libproc a bit. In particular:
* Don't print any error messages to stderr unless DEBUG is defined.
* Add a DPRINTFX macro for use when errno isn't set.
* Print the error string from libelf when appropriate.
MFC r257235:
Remove an incorrect debug printf.
MFC r257248:
Fix the build with gcc.
MFC r257298:
Revert r257248 and fix the problem in a way that doesn't violate style(9).
Do not force to run atexit handlers, which text comes from a dso owning
the handle passed to __cxa_finalize() but which are registered by other
dso, when the process is inside exit(3).
Implement extended LUN support. If PIM_EXTLUNS is set by a SIM, encode
the upper 32-bits of the LUN, if possible, into the target_lun field as
passed directly from the REPORT LUNs response. This allows extended LUN
support to work for all LUNs with zeros in the lower 32-bits, which covers
most addressing modes without breaking KBI. Behavior for drivers not
setting PIM_EXTLUNS is unchanged. No user-facing interfaces are modified.
Extended LUNs are stored with swizzled 16-bit word order so that, for
devices implementing LUN addressing (like SCSI-2), the numerical
representation of the LUN is identical with and without PIM_EXTLUNS. Thus
setting PIM_EXTLUNS keeps most behavior, and user-facing LUN IDs, unchanged.
This follows the strategy used in Solaris. A macro (CAM_EXTLUN_BYTE_SWIZZLE)
is provided to transform a lun_id_t into a uint64_t ordered for the wire.
This is the second part of work for full 64-bit extended LUN support and is
designed to a bridge for stable/10 to the final 64-bit LUN code. The
third and final part will involve widening lun_id_t to 64 bits and will
not be MFCed. This third part will break the KBI but will keep the KPI
unchanged so that all drivers that will care about this can be updated now
and not require code changes between HEAD and stable/10.
Reviewed by: scottl
