endpoints.
This can be used to configure several IPsec tunnels between two hosts
with different security associations.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
The CBQ BORROW flag conflicts with the RMCF_CODEL flag; the
two sets of definitions actually define the same things. The symptom
is that a kernel with CBQ support and not CODEL fails to load a QoS
policy with the obscure error "pfctl: DIOCADDALTQ: Cannot allocate memory."
If ALTQ_DEBUG is enabled, the error becomes a little clearer:
"rmc_newclass: CODEL not configured for CBQ!" is printed by the kernel.
There really shouldn't be two sets of macros that have to be defined
consistently, but the include structure isn't right for exporting
CBQ flags to altq_rmclass.h. Re-align the definitions, and add
CTASSERTs in the kernel to ensure that the definitions are consistent.
PR: 215716
Reviewed by: pkelsey
MFC after: 2 weeks
Sponsored by: Forcepoint LLC
Differential Revision: https://reviews.freebsd.org/D17758
iflib_stop() was not resetting the rxq completion queue state variables.
This meant that for any driver that has receive completion queues, after a
reinit, iflib would start asking what's available on the rx side starting at
whatever the completion queue index was prior to the stop, instead of at 0.
Submitted by: pkelsey
Reported by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
Ensure that any time CSUM_IP_TSO or CSUM_IP6_TSO is set that the corresponding
CSUM_IP6?_TCP / CSUM_IP flags are also set.
Rather than requireing drivers to bake-in an understanding that TSO implies
checksum offloads, make it explicit.
This change requires us to move the IFLIB_NEED_ZERO_CSUM implementation to
ensure it's zeroed for TSO.
Reported by: Jacob Keller <jacob.e.keller@intel.com>
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17801
r333502 removed initialization of ifc_nhwtxqs, and it's not clear
there's a need to copy it into the struct iflib_ctx at all. Use
ctx->ifc_sctx->isc_ntxqs instead.
Further, iflib_stop() did not clear the last ring in the case where
isc_nfl != isc_nrxqs (such as when IFLIB_HAS_RXCQ is set). Use
ctx->ifc_sctx->isc_nrxqs here instead of isc_nfl.
Reported by: pkelsey
Reviewed by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17979
mutexes but now are converted to epoch(9) use thread-private epoch_tracker.
Embedding tracker into ifnet(9) or ifnet derived structures creates a non
reentrable function, that will fail miserably if called simultaneously from
two different contexts.
A thread private tracker will provide a single tracker that would allow to
call these functions safely. It doesn't allow nested call, but this is not
expected from compatibility KPIs.
Reviewed by: markj
r338838 attempted to fix issues with rxcsum and rxcsum6.
However, the rxcsum bits were set as though if_setcapenablebit() was
being called, not if_togglecapenable() which is in use. As a result,
it was not possible to disable rxcsum when rxcsum6 was supported.
PR: 233004
Reported by: lev
Reviewed by: lev
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17881
If the syncdev is removed we no longer need to clean up the multicast
entry we've got set up for that device.
Pass the ifnet detach event through pf to pfsync, and remove our
multicast handle, and mark us as no longer having a syncdev.
Note that this callback is always installed, even if the pfsync
interface is disabled (and thus it's not a per-vnet callback pointer).
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17502
pf subscribes to ifnet_departure_event events, so it can clean up the
ifg_pf_kif and if_pf_kif pointers in the ifnet.
During vnet shutdown interfaces could go away without sending the event,
so pf ends up cleaning these up as part of its shutdown sequence, which
happens after the ifnet has already been freed.
Send the ifnet_departure_event during vnet shutdown, allowing pf to
clean up correctly.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17500
The callbacks are installed and removed depending on the state of the
pfsync device, which is per-vnet. The callbacks must also be per-vnet.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17499
So we have a global limit of 1024 fragments, but it is fine grained to
the region of the packet. Smaller packets may have less fragments.
This costs another 16 bytes of memory per reassembly and devides the
worst case for searching by 8.
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D17734
Remember 16 entry points based on the fragment offset. Instead of
a worst case of 8196 list traversals we now check a maximum of 512
list entries or 16 array elements.
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D17733
VIMAGE, and feature richness and global state increasing the 8k of
vnet module space are no longer sufficient for people and loading
multiple modules, e.g., pf(4) and ipl(4) or ipsec(4) will fail on
the second module.
Increase the module space to 8 * PAGE_SIZE which should be enough
to hold multiple firewalls, ipsec, multicast (as in the old days was
a problem), epair, carp, and any kind of other vnet enabled modules.
Sadly this is a global byte array part of the vnet_set, so we cannot
dynamically change its size; otherwise a TUNABLE would have been
a better solution.
PR: 228854
Reported by: Ernie Luzar, Marek Zarychta
Discussed with: rgrimes on current
MFC after: 3 days
This change defines the RA "6" (IPv6-Only) flag which routers
may advertise, kernel logic to check if all routers on a link
have the flag set and accordingly update a per-interface flag.
If all routers agree that it is an IPv6-only link, ether_output_frame(),
based on the interface flag, will filter out all ETHERTYPE_IP/ARP
frames, drop them, and return EAFNOSUPPORT to upper layers.
The change also updates ndp to show the "6" flag, ifconfig to
display the IPV6_ONLY nd6 flag if set, and rtadvd to allow
announcing the flag.
Further changes to tcpdump (contrib code) are availble and will
be upstreamed.
Tested the code (slightly earlier version) with 2 FreeBSD
IPv6 routers, a FreeBSD laptop on ethernet as well as wifi,
and with Win10 and OSX clients (which did not fall over with
the "6" flag set but not understood).
We may also want to (a) implement and RX filter, and (b) over
time enahnce user space to, say, stop dhclient from running
when the interface flag is set. Also we might want to start
IPv6 before IPv4 in the future.
All the code is hidden under the EXPERIMENTAL option and not
compiled by default as the draft is a work-in-progress and
we cannot rely on the fact that IANA will assign the bits
as requested by the draft and hence they may change.
Dear 6man, you have running code.
Discussed with: Bob Hinden, Brian E Carpenter
Previously, changing the MTU would require destroying the lagg and
creating a new one. Now it is allowed to change the MTU of
the lagg interface and the MTU of the ports will be set to match.
If any port cannot set the new MTU, all ports are reverted to the original
MTU of the lagg. Additionally, when adding ports, the MTU of a port will be
automatically set to the MTU of the lagg. As always, the MTU of the lagg is
initially determined by the MTU of the first port added. If adding an
interface as a port for some reason fails, that interface is reverted to its
original MTU.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reviewed by: mav
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D17576
That commit is causing kernel panics in em(4), so this will be reverted
until those are fixed.
Reported by: ae@, pho@, et al
Sponsored by: Intel Corporation
This change is similar to r339646. The callback that checks for appearing
and disappearing of tunnel ingress address can be called during VNET
teardown. To prevent access to already freed memory, add check to the
callback and epoch_wait() call to be sure that callback has finished its
work.
MFC after: 20 days
allowed.
ipsec_srcaddr() callback can be called during VNET teardown, since
ingress address checking subsystem isn't VNET specific. And thus
callback can make access to already freed memory. To prevent this,
use V_ipsec_idhtbl pointer as indicator of VNET readiness. And make
epoch_wait() after resetting it to NULL in vnet_ipsec_uninit() to
be sure that ipsec_srcaddr() is finished its work.
Reported by: kp
MFC after: 20 days
Changelist:
- Move large parts of VALE code to a new file and header netmap_bdg.[ch].
This is useful to reuse the code within upcoming projects.
- Improvements and bug fixes to pipes and monitors.
- Introduce nm_os_onattach(), nm_os_onenter() and nm_os_onexit() to
handle differences between FreeBSD and Linux.
- Introduce some new helper functions to handle more host rings and fake
rings (netmap_all_rings(), netmap_real_rings(), ...)
- Added new sysctl to enable/disable hw checksum in emulated netmap mode.
- nm_inject: add support for NS_MOREFRAG
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17364
The taskqgroup_detach function does not check if task is already enqueued when
detaching it. This may lead to kernel panic if enqueued task starts after
context state lock is destroyed. Ensure that the already enqueued admin tasks
are executed before detaching them.
The issue was discovered during validation of D16429. Unloading of if_ixlv
followed by immediate removal of VFs with iovctl -D may lead to panic on
NODEBUG kernel.
As well, check if iflib is in detach before enqueueing new admin or iov
tasks, to prevent new tasks from executing while the taskqgroup tasks
are being drained.
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: shurd@, erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D17404
SX-locks, during if_purgeaddrs(), by not allowing to hold the epoch
read lock over typical network IOCTL code paths. This is a regression
issue after r334305.
Reviewed by: ae (network)
Differential revision: https://reviews.freebsd.org/D17647
MFC after: 1 week
Sponsored by: Mellanox Technologies
* use CK_LIST and FNV hash to keep chains of softc;
* read access to softc is protected by epoch();
* write access is protected by ipsec_ioctl_sx. Changing of softc fields
is allowed only when softc is unlinked from CK_LIST chains.
* linking/unlinking of softc is allowed only when ipsec_ioctl_sx is
exclusive locked.
* the plain LIST of all softc is replaced by hash table that uses ingress
address of tunnels as a key.
* added support for appearing/disappearing of ingress address handling.
Now it is allowed configure non-local ingress IP address, and thus the
problem with if_ipsec(4) configuration that happens on boot, when
ingress address is not yet configured, is solved.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17190
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17214
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
* remove the note about ingress address from BUGS section.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
appearing and disappearing on the host system.
Such handling is need, because tunneling interfaces must use addresses,
that are configured on the host as ingress addresses for tunnels.
Otherwise the system can send spoofed packets with source address, that
belongs to foreign host.
The KPI uses ifaddr_event_ext event to implement addresses tracking.
Tunneling interfaces register event handlers and then they are
notified by the kernel, when an address disappears or appears.
ifaddr_event_compat() handler from if.c replaced by srcaddr_change_event()
in the ip_encap.c
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
vlan_lladdr_fn() is called from taskqueue, which means there's no vnet context
set. We can end up trying to send ARP messages (through the iflladdr_event
event), which requires a vnet context.
PR: 227654
MFC after: 3 days
handler receives the type of event IFADDR_EVENT_ADD/IFADDR_EVENT_DEL,
and the pointer to ifaddr. Also ifaddr_event now is implemented using
ifaddr_event_ext handler.
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17100
Finishes the conversion of the 40Gb Intel Ethernet drivers to iflib(9) for
FreeBSD 12.0, and fixes numerous bugs in both ixl(4) and iavf(4).
This commit also re-adds the VF driver to GENERIC since it now compiles and
functions.
The VF driver name was changed from ixlv(4) to iavf(4) because the VF driver is
now intended to be used with future products, not just with Fortville/Fort Park
VFs.
A man page update that documents these drivers is forthcoming in a separate
commit.
Reviewed by: sbruno@, kbowling@
Tested by: jeffrey.e.pieper@intel.com
Approved by: re (gjb@)
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D16429
epoch section without exiting that epoch section. This is bad for two
reasons: the epoch section won't exit, and we will leave the epoch tracker
from the stack on the epoch list.
Fix the epoch leak by making sure we exit epoch sections before returning.
Reviewed by: ae, gallatin, mmacy
Approved by: re (gjb, kib)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17450
is done via using ifconfig, which uses a SIOCSIFMTU ioctl() command, or
doing it using a TUNSIFINFO/TAPSIFINFO ioctl() command.
Without this patch, for IPv6 the new MTU is not used when creating routes.
Especially, when initiating TCP connections after increasing the MTU,
the old MTU is still used to compute the MSS.
Thanks to ae@ and bz@ for helping to improve the patch.
Reviewed by: ae@, bz@
Approved by: re (kib@)
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D17180
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
Various capabilities were not being handled correctly in the
SIOCSIFCAP handler. Specifically:
IFCAP_RXCSUM and IFCAP_RXCSUM_IPV6 could be set even if not supported
It was impossible to disable IFCAP_RXCSUM and/or IFCAP_RXCSUM_IPV6 via
ifconfig since it does ioctl() per command-line flag rather than combine
them into a single call.
IFCAP_VLAN_HWCSUM could not be modified via the ioctl()
Setting any combination of the three IFCAP_WOL flags would set only
IFCAP_WOL_MCAST | IFCAP_WOL_MAGIC. For example, setting only
IFCAP_WOL_UCAST would result in both IFCAP_WOL_MCAST and IFCAP_WOL_MAGIC
being enabled, but IFCAP_WOL_UCAST would not be enabled.
Because if_vlancap() was called before if_togglecapenable(), vlan flags
were sometimes not applied correctly.
Interfaces were being unnecessarily stopped and restarted for WoL
PR: 231151
Submitted by: Kaho Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>
Reported by: Shirkdog <mshirk@daemon-security.com>
Reviewed by: galladin
Approved by: re (gjb)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17158
Similar to arm64, riscv compiler uses PC-relative loads/stores,
and with static data compiler does not emit relocations.
In result, kernel module linker has nothing to fix and data accessed
from the wrong location.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Remove sysctls:
txq_drain_encapfail - now a duplicate of encap_txd_encap_fail
intr_link - was never incremented
intr_msix - was never incremented
rx_zero_len - was never incremented
The following were not incremented in all code-paths that apply:
m_pullups, mbuf_defrag, rxd_flush, tx_encap, rx_intr_enables, tx_frees,
encap_txd_encap_fail.
Fixes:
Replace the broken collapse_pkthdr() implementation with an MPASS().
fl_refills and fl_refills_large were not incremented when using netmap.
Reviewed by: gallatin
Approved by: re (marius)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16733
use the already existing one. No functional changes.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17004
The MP ring may have txq pointers enqueued. Previously, these were
passed to m_free() when IFC_QFLUSH was set. This patch checks for
the value and doesn't call m_free().
Reviewed by: gallatin
Approved by: re (gjb)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16882
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
ether_set_pcp should not be called from ether_output_frame for VLAN
interfaces -- the vid + pcp will be inserted during vlan_transmit in
that case. r337943 sets the VLAN's ifnet's if_pcp to a proper PCP value
and this led to double encapsulation (once with vid 0 and second time
with vid+pcp).
PR: 230794
Reviewed by: kib@
Approved by: re@ (gjb@)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D16887
2^32 bps or greater to be used. Prior to this, bandwidth parameters
would simply wrap at the 2^32 boundary. The computations in the HFSC
scheduler and token bucket regulator have been modified to operate
correctly up to at least 100 Gbps. No other algorithms have been
examined or modified for correct operation above 2^32 bps (some may
have existing computation resolution or overflow issues at rates below
that threshold). pfctl(8) will now limit non-HFSC bandwidth
parameters to 2^32 - 1 before passing them to the kernel.
The extensions to the pf(4) ioctl interface have been made in a
backwards-compatible way by versioning affected data structures,
supporting all versions in the kernel, and implementing macros that
will cause existing code that consumes that interface to use version 0
without source modifications. If version 0 consumers of the interface
are used against a new kernel that has had bandwidth parameters of
2^32 or greater configured by updated tools, such bandwidth parameters
will be reported as 2^32 - 1 bps by those old consumers.
All in-tree consumers of the pf(4) interface have been updated. To
update out-of-tree consumers to the latest version of the interface,
define PFIOC_USE_LATEST ahead of any includes and use the code of
pfctl(8) as a guide for the ioctls of interest.
PR: 211730
Reviewed by: jmallett, kp, loos
MFC after: 2 weeks
Relnotes: yes
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D16782
Upcoming Ethernet hardware will support new media types that aren't in the kernel
yet, so they are added here. These mostly include new 25G/50G/100G media types;
and this commit introduces new 200G/400G speeds and media.
Reviewed by: hselasky@, jhb@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D16731
