Add it to the x86 GENERIC and MINIMAL kernels
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D28738
This package is intended to be used with ice(4) version 0.28.1-k.
That update will happen in a forthcoming commit.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
This uses the chacha20 IETF and poly1305 implementations from
libsodium. A seperate auth_hash is created for the auth side whose
Setkey method derives the poly1305 key from the AEAD key and nonce as
described in RFC 8439.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27837
Note that this algorithm implements the mode defined in RFC 8439.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27836
AFAICT, this was an oversight from
9e5787d228 (svn r364746). That revision
inadvertently disabled assertions unconditionally.
Reviewed by: freqlabs
MFC after: 3 days
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D28256
Update zfs_config.h to match latest merge in FreeBSD
The version string is declared as 2.0.0-FreeBSD_gf11b09dec to provide
more information about the loaded module:
- the OpenZFS version in base is 2.0
- we are using the in tree-module ("FreeBSD")
- the last merged OpenZFS git revision ("gf11b09dec")
With future merges the git revision tag should be updated.
As we are merging from OpenZFS master branch and already include features
like dRAID, referencing patchlevel releases (2.0.1, 2.0.2) is pointless.
Reviewed by: freqlabs
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28447
This code implements a version of the devres framework found
working for various iwlwifi use cases and also providing functions
for ttm_page_alloc_dma.c from DRM.
Part of the framework replicates the consumed KPI, while others
are internal helper functions.
In addition the simple devm_k*malloc() consumers were implemented
and kvasprintf() was enhanced to also work for the devm_kasprintf()
case.
Addmittingly lkpi_devm_kmalloc_release() could be avoided but for
the overall understanding of the code and possible memory tracing
it may still be helpful.
Further devsres consumer are implemented for iwlwifi but will follow
later as the main reason for this change is to sort out overlap with
DRM.
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi
MFC After: 3 days
Reviewed-by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D28189
Implement linux firmware KPI compat code.
This includes: request_firmware() request_firmware_nowait(),
request_firmware_direct(), firmware_request_nowarn(),
and release_firmware().
Given we will try to map requested names from natively ported
or full-linuxkpi-using drivers to a firmware(9) auto-loading
name format (.ko file name and image name matching),
we quieten firmware(9) and print success or failure (unless
the _nowarn() version was called) in the linuxkpi implementation.
At the moment we try up-to 4 different naming combinations,
with path stripped, original name, and requested name with '/'
or '.' replaced.
We do not currently defer loading in the "nowait" case.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
(firmware(9) nowarn update from D27413)
MFC after: 3 days
Reviewed by: kib, manu (looked at older versions)
Differential Revision: https://reviews.freebsd.org/D27414
This node is part of an A10-NSP (L2-BSA) development.
Carrier networks tend to stack three or more tags for internal
purposes and therefore hiding the service tags deep inside of the
stack. When decomposing such an access network frame, the processing
order is typically reversed: First distinguish by service, than by
other means.
This new netgragh node allows to bring the relevant VLAN in front (to
the out-most position). This way other netgraph nodes (like ng_vlan)
can operate on this specific type.
Reviewed by: manpages (gbe), brueffer (manpages), kp
Approved by: kp (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: IKS Service GmbH
Differential Revision: https://reviews.freebsd.org/D22076
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
Since we use --input-type binary these options are rather meaningless. Both
binutils and elftoolchain ignore the option in this case, but LLVM does not,
and instead strips all symbols from the output file, causing missing symbols at
run time if building with llvm-objcopy. Thus simply remove the options; the
linux module has never included them for building its VDSO (added in r283407),
but for some reason the original commit of linux64 (r283424) added them.
These should however eventually be changed to use template assembly files as is
now done for firmware and MFS_IMAGE.
Reviewed by: emaste, trasz
Differential Revision: https://reviews.freebsd.org/D27740
Currently only amd64, i386 and powerpc build VirtIO modules, yet all other
architectures have at least one kernel configuration that includes the
transport drivers, and so they lack drivers for all the devices they don't
statically compile into the kernel. Instead, enable the build everywhere so all
architectures have the full set of device drivers available.
Reviewed by: bryanv (earlier version), imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D28058
Many I2C "compatibility" mouse devices found on touchpads continue to
return last report data in sampling mode after touch has been ended.
That results in cursor drift. Filter out such a reports with comparing
content of current report with content of previous one.
Reported by: many
Tested by: omatsuda, gllb (github.com)
Obtained from: sysutils/iichid
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
This driver supports some arm and arm64 boards equipped with
"snps,dw-wdt"-compatible watchdog device.
Tested on RK3399-based board (RockPro64).
Once started watchdog device cannot be stopped.
Interrupt handler has mode to kick watchdog even when software does not do it
properly.
This can be controlled via sysctl: dev.dwwdt.prevent_restart.
Also - driver handles system shutdown and prevents from restart when system
is asked to reboot.
Submitted by: kjopek@gmail.com
Differential Revision: https://reviews.freebsd.org/D26761
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
This module intended to measure performance of routing lookups.
Uses a list of IP addresses specified by sysctl one-by-one.
Performance testing is triggered by changing sysctl OID with a number of lookups to execute.
Lookups are done by the chunks of 10K routes, entering/exiting epoch on
chunk granularity to amortise cost.
Example:
make -C sys/modules/test/fib_lookup unload load
for i in `cat ~/ip4.txt`; do sysctl net.route.test.add_inet_addr=$i; done
for i in `cat ~/ip6.txt`; do sysctl net.route.test.add_inet6_addr=$i; done
sysctl net.route.test.run_inet=10000000
dmesg | tail
Dec 13 23:24:05 current kernel: 10000000 packets in 417240173 nanoseconds, 23967011 pps
Dec 13 23:24:06 current kernel: run: 10000000 packets vnet 0xfffff80003073f00
Dec 13 23:24:07 current kernel: 10000000 packets in 423086254 nanoseconds, 23635842 pps
Differential Revision: https://reviews.freebsd.org/D27604
This change introduces loadable fib lookup modules based on
DPDK rte_lpm lib targeted for high-speed lookups in large-scale tables.
It is based on the lookup framework described in D27401.
IPv4 module is called dpdk_lpm4. It wraps around rte_lpm [1] library.
This library implements variation of DIR24-8 [2] lookup algorithm.
Module provide lockless route lookups and in-place incremental updates,
allowing for good RIB performance.
IPv6 module is called dpdk_lpm6. It wraps around rte_lpm6 [3] library.
Implementation can be seen as multi-bit trie where the stride or number of bits
inspected on each level varies from level to level.
It can vary from 1 to 14 memory accesses, with 5 being the average value
for the lengths that are most commonly used in IPv6.
Module provide lockless route lookups for global unicast addresses
and in-place incremental updates, allowing for good RIB performance.
Implementation details:
* wrapper code lives in `sys/contrib/dpdk_rte_lpm/dpdk_lpm[6].c`.
* rte_lpm[6] implementation contains both RIB and FIB code.
. RIB ("rule_") code, backed by array of hash tables part has been commented out,
as base radix already provides all the necessary primitives.
* link-local lookups are currently implemented as base radix lookup.
This part should be converted to something like read-only radix trie.
Usage detail:
Compile kernel with option FIB_ALGO and load dpdk_lpm4/dpdk_lpm6
module at any time. They will be picked up automatically when
amount of routes raises to several thousand.
[1]: https://doc.dpdk.org/guides/prog_guide/lpm_lib.html
[2]: http://yuba.stanford.edu/~nickm/papers/Infocom98_lookup.pdf
[3]: https://doc.dpdk.org/guides/prog_guide/lpm6_lib.html
Differential Revision: https://reviews.freebsd.org/D27412
A test of this is funcs/tst.strtok.d which has this filter:
BEGIN
/(this->field = strtok(this->str, ",")) == NULL/
{
exit(1);
}
The test will randomly fail with exit status of 1 indicating that this->field
was NULL even though printing it out shows it is not.
This is compiled to the DTrace instruction set:
// Pushed arguments not shown here
// call strtok() and set result into %r1
07: 2f001f01 call DIF_SUBR(31), %r1 ! strtok
// set thread local scalar this->field from %r1
08: 39050101 stls %r1, DT_VAR(1281) ! DT_VAR(1281) = "field"
// Prepare for the == comparison
// Set right side of %r2 to NULL
09: 25000102 setx DT_INTEGER[1], %r2 ! 0x0
// string compare %r1 (strtok result) to %r2
10: 27010200 scmp %r1, %r2
In this case only %r1 is loaded with a string limit set to lim1. %r2 being
NULL does not get loaded and does not set lim2. Then we call dtrace_strncmp()
with MIN(lim1, lim2) resulting in passing 0 and comparing neither side.
dtrace_strncmp() handles this case fine and it already has been while
being lucky with what lim2 was [un]initialized as.
Reviewed by: markj, Don Morris <dgmorris AT earthlink.net>
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27671
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
