function instead of unlink(2).
Now when pidfile_remove() uses unlinkat(2) to remove the pidfile
it is safe to use this function in capability mode.
Style fix: sort headers.
PR: 220524
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D11692
In a recent interpretation[1], "\\" shall return a non-zero value
(indicating either no match or an error).
The fix involves a change over r254091 and now the behavior matches the
Sun/IBM/HP closed source implementations and also likely musl libc.
Submitted by: Joerg Schilling <joerg at schily.net>
MFC after: 1 week
[1] http://austingroupbugs.net/view.php?id=806
When the mps(4) and mpr(4) drivers need to reinitialize the
firmware, they sometimes need to reallocate all of the memory
allocated by the driver. The reallocation happens whenever the IOC
Facts change. That should only happen after a firmware upgrade.
If the reinitialization happens as a result of a timed out command
sent to the card, the command that timed out and triggered the
reinit may have been freed if iocfacts_allocate() reallocated all
memory. If the caller attempts to access the command after that,
the kernel will panic because the caller will be dereferencing
freed memory.
The solution is to set a flag in the softc when we reallocate,
and avoid dereferencing the command strucure if we've reallocated.
The changes are largely the same in both drivers, since mpr(4) is a
derivative of mps(4).
o In iocfacts_allocate(), if the IOC Facts have changed and we
need to reallocate, set the REALLOCATED flag in the softc.
o Change wait_command() to take a struct mps_command ** instead of
a struct mps_command *. This allows us to NULL out the caller's
command pointer if we have to reinit the controller and the data
structures get reallocated. (The REALLOCATED flag will be set
in the softc if that has happened.)
o In every place that calls wait_command(), make sure we handle
the case where the command is NULL after the call.
o The mpr(4) driver has mpr_request_polled() which can also
reinitialize the card. Also check for reallocation there.
Reviewed by: scottl, slm
MFC after: 1 week
Sponsored by: Spectra Logic
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
This is the FreeBSD equivalent of LLVM r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
Submitted by: Karnajit Wangkhem
Obtained from: LLVM r310591
This patch modifies function ofw_fdt_setprop (called by OF_setprop),
so that it can add property, when replacing is not possible.
Adding property is needed to fixup FDT's that have missing
properties.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11879
Use PPID and PID to kill off the pre-install and parent pkg(8)
processes unless 'Y' or 'y' are entered at the prompt if the user
wants to proceed with upgrading the kernel and userland at the same
time.
This restores some of the logic and intent of r322327, with the
caveat of printing "child process terminated unexpectedly."
MFC after: 5 days
MFC with: r322327, r322352
Sponsored by: The FreeBSD Foundation
The assembly in sys/mips/include/profile.h will only work for o32 ABI.
Submitted by: Alexander Richardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11950
after r319757.
1) Correct the return value from __wait_event_common() from 1 to 0 in
case the timeout is specified as MAX_SCHEDULE_TIMEOUT. In the other
case __ret is zero and will be substituted in the last part of the
macro with the appropriate value before return.
2) Make sure the "timeout" argument is casted to "int" before
evaluating negativity. Else the signedness of a "long" might be
checked instead of the signedness of an integer.
3) The wait_event() function should not have a return value.
Found by: KrishnamRaju ErapaRaju <Krishna2@chelsio.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
handles a timeout value of MAX_SCHEDULE_TIMEOUT which basically means there
is no timeout. This is a regression issue after r319757.
While at it change the type of returned variable from "long" to "int" to
match the actual return type.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It appears I misunderstand process forking and signal handling in
how the pre-/post-install scripts are executed internally by pkg(8).
In some cases (not all), ^C when prompted to cancel the kernel
package update will stop the pre-install script from executing, but
allow pkg(8) to continue extracting the package when it is not the
intent.
In order to keep somewhat of an anti-footshooting measure in place,
print the recommendation to install the kernel package first if
ASSUME_ALWAYS_YES is false and TERM is set, then sleep for 5 seconds
to allow the user to see the message.
MFC after: 5 days
MFC with: r322327
X-MFC-Note: Maybe not until I am happy with this..
Sponsored by: The FreeBSD Foundation
Introduce a new define to take int account the xAPIC ID limit, for
systems where x2APIC is not available/reliable.
Also change some of the usages of the APIC ID to use an unsigned int
(which is the correct storage type to deal with x2APIC IDs as found in
x2APIC MADT entries).
This allows booting FreeBSD on a box with 256 CPUs and APIC IDs up to
295:
FreeBSD/SMP: Multiprocessor System Detected: 256 CPUs
FreeBSD/SMP: 1 package(s) x 64 core(s) x 4 hardware threads
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
CPU1 (AP/HT): APIC ID: 1
CPU2 (AP/HT): APIC ID: 2
CPU3 (AP/HT): APIC ID: 3
[...]
Core HW ID = 73
CPU252 (AP): APIC ID: 292
CPU253 (AP/HT): APIC ID: 293
CPU254 (AP/HT): APIC ID: 294
CPU255 (AP/HT): APIC ID: 295
Submitted by: kib (previous version)
Relnotes: yes
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11913
So that MAX_APIC_ID can be bumped without wasting memory.
Note that the usage of MAX_APIC_ID in the SRAT parsing forces the
parser to allocate memory directly from the phys_avail physical memory
array, which is not the best approach probably, but I haven't found
any other way to allocate memory so early in boot. This memory is not
returned to the system afterwards, but at least it's sized according
to the maximum APIC ID found in the MADT table.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11912
Populate the lapics arrays and call cpu_add/lapic_create in the setup
phase instead. Also store the max APIC ID found in the newly
introduced max_apic_id global variable.
This is a requirement in order to make the static arrays currently
using MAX_LAPIC_ID dynamic.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11911
Apply the changes from upstream jemalloc 048c6679. This is actually not
quite a cherry pick due to makefile difference and because FreeBSD does
not carry the msvc project files which were also modified in that
commit.
Approved by: jasone (maintainer), markj (mentor)
Sponsored by: Dell EMC Isilon
The amd64 build of boot2 was failing with gcc 6.3.0 due to being more
than 1 kB too large. It was apparently generating a .eh_frame section
which was not being removed by objcopy -S. The .eh_frame section seems
to be mandatory per the amd64 ABI, but boot2 is compiled for i386 (uses
-m32), and therefore should be optional in this context. Suppress
generation of .eh_frame with the -fno-asynchronous-unwind-tables flag to
gcc. This saves 1348 bytes (the limit is 7680 bytes).
Reviewed by: dim, imp
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11928
key_msg2sp() is used for parsing data from setsockopt(IP[V6]_IPSEC_POLICY)
call. This socket option is usually used to configure IPsec bypass for
socket. Only privileged user can set this socket option.
The message syntax is described here
http://www.kame.net/newsletter/20021210/
and our libipsec is usually used to create the correct request.
Add additional checks:
* that sadb_x_ipsecrequest_len is not out of bounds of user supplied buffer
* that src/dst's sa_len is the same
* that 2*sa_len is not out of bounds of user supplied buffer
* that 2*sa_len fits into bounds of sadb_x_ipsecrequest
Reported by: Ilja van Sprundel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11796
The idea here is that, provided upstream pkg(8) maintainers accept
the proposed change, the kernel.ucl will contain a post-install
script causing pkg(8) to emit a message informing to reboot the
system after the kernel is upgraded using 'pkg upgrade', so the
new userland is installed on the running new kernel. At present,
this functionality does not exist in pkg(8), but will help ensure
the upgrade path follows that from UPDATING. To work around this
for now, evaluate ASSUME_ALWAYS_YES, and prompt the user if they
wish to proceed if not set to true.
Since there is a kernel dependency, and a non-GENERIC kernel may
be in use, update Makefile.inc1 to replace '%KERNCONF%' in the
runtime.ucl with the first-built kernel set either via command line
or in make.conf(5).
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
* Enable i386 ABI creation for freebsd
* Added an extra argument in ABISysV_i386::PrepareTrivialCall for mmap
syscall
* Unlike linux, the last argument of mmap is actually 64-bit(off_t).
This requires us to push an additional word for the higher order bits.
* Prior to this change, ktrace dump will show mmap failures due to
invalid argument coming from the 6th mmap argument.
Submitted by: Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D34776
FIODTYPE will be needed by hexdump(1) to speed up the -s flag on devices
that should be able to support fseek(3); specifically, in an attempt to
correct for the fact that most tape drives don't support seeking yet don't
indicate as such when fseeko(3) is invoked. Related: D10939
Reviewed by: cem, emaste, oshogbo
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D10937
reduces diff between amd64 and i386. Also, it fixes a regression introduced
in r322076, i.e., identify_hypervisor() failed to identify some hypervisors.
This function assumes cpu_feature2 is already initialized.
Reported by: dexuan
Tested by: dexuan
Some libusb consumers in Linux-land (in this case, libusb4java) expect a
dev_capability member that they can use to enumerate the device
capabilities.
No particular layout is expected of this, just that it can be traversed
using the bLength member until bNumDeviceCapabilities are read and that the
consumer may then use one of the libusb_get_*_descriptor methods to extract
specific (usb 2.0 vs. ss) capability information.
In collaboration with: hselasky
Reviewed by: hselasky
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11494
geom_bsd, geom_mbr and geom_sunlabel have been obsolete since Marcel
Moolenaar's geom_part was in FreeBSD 7. They haven't been in GENERIC
since FreeBSD 8. Add warning when used.
geom_vol_ffs has been obsolete since ufs support to geom_label was
committed in FreeBSD 5. It hasn't been in GENERIC since FreeBSD 5.
Add warning when used.
geom_fox has been obsolete since gmultipath was committed in FreeBSD 7.
(no warning added, since this is a very obscure class).
These will all be removed in FreeBSD 12.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D11935
Note: Classes will be removed after MFC
New flag 0x4 can be configured in net.enc.[in|out].ipsec_bpf_mask.
When it is set, if_enc(4) additionally captures a packet via BPF after
invoking pfil hook. This may be useful for debugging.
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11804
