virtualizing the pfil hooks.
For consistency add the V_ to virtualize the pfil hooks in here as well.
MFC after: 55 days
X-MFC after: julian MFCed r197952.
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.
Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months
specific routes. When the routing table changes, for example,
when a new route with a more specific prefix is inserted into the
routing table, the flow-table is not updated to reflect that change.
As such existing connections cannot take advantage of the new path.
In some cases the path is broken. This patch will update the affected
flow-table entries when a more specific route is added. The route
entry is properly marked when a route is deleted from the table.
In this case, when the flow-table performs a search, the stale
entry is updated automatically. Therefore this patch is not
necessary for route deletion.
Submitted by: simon, phk
Reviewed by: bz, kmacy
MFC after: 3 days
usable again with options VIMAGE kernels.
Submitted by: bz (the original version, probably identical to this one)
Reviewed by: many @ DevSummit Cambridge
MFC after: 3 days
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
MFC after: immediately
has not worked since the arp-v2 rewrite.
The event handler will be called with the llentry write-locked and
can examine la_flags to determine whether the entry is being added
or removed.
Reviewed by: gnn, kmacy
Approved by: gnn (mentor)
MFC after: 1 month
- Interface link-local address is not reachable within the
node that owns the interface, this is due to the mismatch
in address scope as the result of the installed interface
address loopback route. Therefore for each interface
address loopback route, the rt_gateway field (of AF_LINK
type) will be used to track which interface a given
address belongs to. This will aid the address source to
use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
only for validation reason. Doing so will eliminate as much
of the special case (loopback addresses) handling code
as possible, however, these empty nd6 entries should not
be returned to the userland applications such as the
"ndp" command.
Since both of the above issues contain common files, these
files are committed together.
Reviewed by: bz
MFC after: immediately
New counters now exist for:
requests sent
replies sent
requests received
replies received
packets received
total packets dropped due to no ARP entry
entrys timed out
Duplicate IPs seen
The new statistics are seen in the netstat command
when it is given the -s command line switch.
MFC after: 2 weeks
In collaboration with: bz
and sysuninit handlers.
Previously, sx_vnet, which is a lock designated for protecting
the vnet list, was (ab)used for protecting vnet sysinit / sysuninit
handler lists as well. Holding exclusively the sx_vnet lock while
invoking sysinit and / or sysuninit handlers turned out to be
problematic, since some of the handlers may attempt to wake up
another thread and wait for it to walk over the vnet list, hence
acquire a shared lock on sx_vnet, which in turn leads to a deadlock.
Protecting vnet sysinit / sysuninit lists with a separate lock
mitigates this issue, which was first observed with
flowtable_flush() / flowtable_cleaner() in sys/net/flowtable.c.
Reviewed by: rwatson, jhb
MFC after: 3 days
information for interface of IFF_POINTOPOINT or IFF_LOOPBACK type.
Since the L2 information (rt_lle) is invalid for these interface
types, accidental caching attempt will trigger panic when the invalid
rt_lle reference is accessed.
When installing a new route, or when updating an existing route, the
user supplied gateway address may be an interface address (this is
particularly true for point-to-point interface related modules such
as ppp, if_tun, if_gif). Currently the routing command handler always
set the RTF_GATEWAY flag if the gateway address is given as part of the
command paramters. Therefore the gateway address must be verified against
interface addresses or else the route would be treated as an indirect
route, thus making that route unusable.
Reviewed by: kmacy, julia, rwatson
Verified by: marcus
MFC after: 3 days
which allows an index to be reserved for an ifnet without making
the ifnet available for management operations. Use this in if_alloc()
while the ifnet lock is released between initial index allocation and
completion of ifnet initialization.
Add ifindex_free() to centralize the implementation of releasing an
ifindex value. Use in if_free() and if_vmove(), as well as when
releasing a held index in if_alloc().
Reviewed by: bz
MFC after: 3 days
and centralize in a single function ifindex_alloc(). Assert the
IFNET_WLOCK, and add missing IFNET_WLOCK in if_alloc(). This does not
close all known races in this code.
Reviewed by: bz
MFC after: 3 days
list/index locks, to protect link layer address tables. This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.
Reviewed by: bz, kmacy
MFC after: 3 days
has ifaddresses of AF_LINK type which thus have an embedded
if_index "backpointer", we must update that if_index backpointer
to reflect the new if_index that our ifnet just got assigned.
This change affects only options VIMAGE builds.
Submitted by: bz
Reviewed by: bz
Approved by: re (rwatson), julian (mentor)
ifnet list during if_ef load, directly acquire the ifnet_sxlock
exclusively. That way when if_alloc() recurses the lock, it's a write
recursion rather than a read->write recursion.
This code structure is arguably a bug, so add a comment indicating that
this is the case. Post-8.0, we should fix this, but this commit
resolves panic-on-load for if_ef.
Discussed with: bz, julian
Reported by: phk
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
Specifically, not until the per-vnet parts have been set up.
Submitted by: kmacy@
Reviewed by: julian@, zec@
Approved by: re(rwatson)
MFC after: immediately
moving a frequently executed flowtable syslog statement from being
conditional on bootverbose to conditional on a per-vnet flowtable
sysctl.
Approved by: re@
the mbuf for obtaining the fib index
- check that a cached flow corresponds to the same fib index as the
packet for which we are doing the lookup
- at interface detach time flush any flows referencing stale rtentrys
associated with the interface that is going away (fixes reported
panics)
- reduce the time between cleans in case the cleaner is running at
the time the eventhandler is called and the wakeup is missed less
time will elapse before the eventhandler returns
- separate per-vnet initialization from global initialization
(pointed out by jeli@)
Reviewed by: sam@
Approved by: re@
with their own virtual network stack. Jails only inheriting a
network stack cannot change anything that cannot be changed from
within a prison.
Reviewed by: rwatson, zec
Approved by: re (kib)
NET_RT_DUMP, which otherwise only returned information of AF_MAX.
This was broken in r193232 (save your time - my bug, my fix).
PR: kern/137700
Reported by: Larry Baird (lab gta.com)
Tested by: Larry Baird (lab gta.com)
Reviewed by: zec, lstewart, qing
Approved by: re (kib)
when adding the __start_ symbol knows the expected section alignment
and can place the __start_ symbol correctly.
These sections will not support symbols with super-cache line alignment
requirements.
For full details, see posting to freebsd-current, 2009-08-10,
Message-ID: <20090810133111.C93661@maildrop.int.zabbadoz.net>.
Debugging and testing patches by:
Kamigishi Rei (spambox haruhiism.net),
np, lstewart, jhb, kib, rwatson
Tested by: Kamigishi Rei, lstewart
Reviewed by: kib
Approved by: re
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
vnet.c to iterate virtual network stacks without being aware of
the implementation details previously hidden in kern_vimage.c.
Now they are in the same file, so remove this added complexity.
Reviewed by: bz
Approved by: re (vimage blanket)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
L2 information. For an indirect route the cached L2 entry contains the
MAC address of the gateway. Typically the default route is used to
transmit multicast packets when explicit multicast routes are not
available. The ether_output() function bypasses L2 resolution function
if it verifies the L2 cache is valid, because the cached L2 address
(a unicast MAC address) is copied into the packets as the destination
MAC address. This validation, however, does not apply to broadcast and
multicast packets because the destination MAC address is mapped
according to a standard method instead.
Submitted by: Xin Li
Reviewed by: bz
Approved by: re
- Allow loopback route to be installed for address assigned to
interface of IFF_POINTOPOINT type.
- Install loopback route for an IPv4 interface addreess when the
"useloopback" sysctl variable is enabled. Similarly, install
loopback route for an IPv6 interface address when the sysctl variable
"nd6_useloopback" is enabled. Deleting loopback routes for interface
addresses is unconditional in case these sysctl variables were
disabled after an interface address has been assigned.
Reviewed by: bz
Approved by: re
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
(ifconfig ifN (-)vnet <jname|jid>) work correctly.
Move vi_if_move to if.c and split it up into two functions(*),
one for each ioctl.
In the reclaim case, correctly set the vnet before calling if_vmove.
Instead of silently allowing a move of an interface from the current
vnet to the current vnet, return an error. (*)
There is some duplicate interface name checking before actually moving
the interface between network stacks without locking and thus race
prone. Ideally if_vmove will correctly and automagically handle these
in the future.
Suggested by: rwatson (*)
Approved by: re (kib)
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
non-vrtiualized sysctls so we cannot used one common function.
Add a macro to convert the arg1 in the virtualized case to
vnet.h to not expose the maths to all over the code.
Add a wrapper for the single virtualized call, properly handling
arg1 and call the default implementation from there.
Convert the two over places to use the new macro.
Reviewed by: rwatson
Approved by: re (kib)
nor destructors, as there's no actual work to do.
In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.
Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.
Reviewed by: bz
Approved by: re (vimage blanket)
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use). Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.
Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions. Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.
Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.
Update various consumers of these KPIs based on whether they may sleep
or not.
Reviewed by: bz
Approved by: re (kib)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
little purpose and are unused in the base system.
The IOCTL functionality is entirely duplicated and routing sockets
provide a richer interface than the kqueue functionality.
Further, it is not practical for these devices to be made sensible in
the face of VIMAGE.
Bump __FreeBSD_version on the off chance that there is any code out
there that actually uses this stuff.
Reviewed by: rwatson
Discussed with: bz, zec
Approved by: re@ (kensmith)
MAXCPU to mp_maxid, and handling and reporting of requests to use more
threads than we have CPUs to run them on.
Reviewed by: bz
Approved by: re (kib)
MFC after: 6 weeks
if_addr_rlock() and if_addr_runlock() for regular address lists, and
if_maddr_rlock() and if_maddr_runlock() for multicast address lists.
We will use these in various kernel modules to avoid encoding specific
type and locking strategy information into modules that currently use
IF_ADDR_LOCK() and IF_ADDR_UNLOCK() directly.
MFC after: 6 weeks
arrays to [MAXCPU], offering moderate memory savings. In some places,
this requires using CPU_ABSENT() to handle less common platforms with
sparse CPU IDs. In several places, assert that the selected CPUID for
work placement or statistics is not CPU_ABSENT() to be on the safe side.
Discussed with: bz, jeff
Note that this does not actually enable full-range i/o requests for
64 architectures, and is done now to update KBI only.
Tested by: pho
Reviewed by: jhb, bde (as part of the review of the bigger patch)
in_ifaddrhead and INADDR_HASH address lists.
Previously, these lists were used unsynchronized as they were effectively
never changed in steady state, but we've seen increasing reports of
writer-writer races on very busy VPN servers as core count has gone up
(and similar configurations where address lists change frequently and
concurrently).
For the time being, use rwlocks rather than rmlocks in order to take
advantage of their better lock debugging support. As a result, we don't
enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion
is complete and a performance analysis has been done. This means that one
class of reader-writer races still exists.
MFC after: 6 weeks
Reviewed by: bz
Import if_epair(4), a virtual cross-over Ethernet-like interface pair.
Note these files are 1:1 from p4 and not yet connected to the build
not knowing about the new netisr interface.
Sponsored by: The FreeBSD Foundation
- at_ifawithnet(), which acquires an locks it needs and returns an
at_ifaddr reference.
- at_ifawithnet_locked(), which relies on the caller locking
at_ifaddr_list, and returns a pointer rather than a reference.
Update various consumers to prefer one or the other, including ether
and fddi output, to properly release at_ifaddr references.
Rework at_control() to manage locking and references in a manner
identical to in_control().
MFC after: 6 weeks
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:
ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr
Remove unused macro which didn't have required referencing:
IFP_TO_IA6
This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.
Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.
Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)
This change should make options VIMAGE kernel builds usable again,
to some extent at least.
Note that the size of struct vnet_inet has changed, though in
accordance with one-bump-per-day policy we didn't update the
__FreeBSD_version number, given that it has already been touched
by r194640 a few hours ago.
Reviewed by: bz
Approved by: julian (mentor)
- shrink size guards for vnet_net.
vnet_rtable does not need size guards as it is self-contained.
- remove a bunch of defines from vnet.h no longer valid.
Vimage module, which had been there already but now is stateful.
All variables are now file local; so this further limits the global
spreading of routing related things throughout the kernel.
Add a missing function local variable in case of MPATHing.
Reviewed by: zec
No longer export rt_tables as all lookups go through
rt_tables_get_rnh().
We cannot make rt_tables (and rtstat, rttrash[1]) static as
netstat -r (-rs[1]) would stop working on a stripped
VIMAGE_GLOBALS kernel.
Reviewed by: zec
Presumably broken by: phk 13.5y ago in r12820 [1]
a pointer to an ifaddr matching the passed socket address, returns a
boolean indicating whether one was present. In the (near) future,
ifa_ifwithaddr() will return a referenced ifaddr rather than a raw
ifaddr pointer, and the new wrapper will allow callers that care only
about the boolean condition to avoid having to free that reference.
MFC after: 3 weeks
- Unify reference count and lock initialization in a single function,
ifa_init().
- Move tear-down from a macro (IFAFREE) to a function ifa_free().
- Move reference count bump from a macro (IFAREF) to a function ifa_ref().
- Instead of using a u_int protected by a mutex to refcount(9) for
reference count management.
The ifa_mtx is now used for exactly one ioctl, and possibly should be
removed.
MFC after: 3 weeks
Add necessary changes to the kernel for this (basically introduce a
bpf_zero_counters() function). As well, update the man page.
MFC after: 1 month
Discussed with: rwatson
missing it.
Remove the "hidden" kernel only include of vimage.h from ip_var.h added
with the very first Vimage commit r181803 to avoid further kernel poisoning.
by if_free (w/o doing if_attach); move ifq_attach to if_alloc and
rename ifq_attach/detach to ifq_init/ifq_delete to better identify
their purpose
Reviewed by: jhb, kmacy
parameter "vnet" when it is created, a new vnet instance will be created
along with the jail. Networks interfaces can be moved between prisons
with an ioctl similar to the one that moves them between vimages.
For now vnets will co-exist under both jails and vimages, but soon
struct vimage will be going away.
Reviewed by: zec, julian
Approved by: bz (mentor)
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
actual implementation.
Remove the accessor functions for the compiled out case, just returning
"unavail" values. Remove the kernel conditional from the header file as
it is no longer needed, only leaving the externs.
Hide the improperly virtualized SYSCTL/TUNABLE for the flowtable size
under the kernel option as well.
Reviewed by: rwatson
Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...
X-MFC: never
Reviewed by: bz
Approved by: gnn(mentor)
Obtained from: NETASQ
use IPv4/v6 for inter-node communication (according to my reading).
Properly wrap the carp callouts in INET || INET6 and refelect this
in sys/conf/files as well. While in theory this should be ok,
it might be a bit optimistic to think that carp could build with
inet6 only[1].
Discussed with: mlaier [1]
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
So properly hide the already #ifdef SCTP code with
#if defined(INET) || defined(INET6) as well to get us
closer to a non-INET/INET6 kernel.
Discussed with: tuexen [1]
If packet leaves ipfw to other kernel subsystem (dummynet, netgraph, etc)
it carries pointer to matching ipfw rule. If this packet then reinjected back
to ipfw, ruleset processing starts from that rule. If rule was deleted
meanwhile, due to existed race condition panic was possible (as well as
other odd effects like parsing rules in 'reap list').
P.S. this commit changes ABI so userland ipfw related binaries should be
recompiled.
MFC after: 1 month
Tested by: Mikolaj Golub
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
+ move ipfw and dummynet hooks declarations to raw_ip.c (definitions
in ip_var.h) same as for most other global variables.
This removes some dependencies from ip_input.c;
+ remove the IPFW_LOADED macro, just test ip_fw_chk_ptr directly;
+ remove the DUMMYNET_LOADED macro, just test ip_dn_io_ptr directly;
+ move ip_dn_ruledel_ptr to ip_fw2.c which is the only file using it;
To be merged together with rev 193497
MFC after: 5 days
an accessor function to get the correct rnh pointer back.
Update netstat to get the correct pointer using kvm_read()
as well.
This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.
Reviewed by: julian, rwatson, zec
X-MFC: not possible
required for options DEVICE_POLLING.
De-fragment the NETISR_ constant space and lower NETISR_MAXPROT from
32 to 16 -- when sizing queue arrays using this compile-time constant,
significant amounts of memory are saved.
Warn on the console when tunable values for netisr are automatically
adjusted during boot due to exceeding limits, invalid values, or as a
result of DEVICE_POLLING.
threads:
- Support up to one netisr thread per CPU, each processings its own
workstream, or set of per-protocol queues. Threads may be bound
to specific CPUs, or allowed to migrate, based on a global policy.
In the future it would be desirable to support topology-centric
policies, such as "one netisr per package".
- Allow each protocol to advertise an ordering policy, which can
currently be one of:
NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
an implicit or explicit source (such as an interface or socket).
NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
as well as allowing protocols to provide a flow generation function
for mbufs without flow identifers (m2flow). Falls back on
NETISR_POLICY_SOURCE if now flow ID is available.
NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
each packet handled by netisr (m2cpuid).
- Provide utility functions for querying the number of workstreams
being used, as well as a mapping function from workstream to CPU ID,
which protocols may use in work placement decisions.
- Add explicit interfaces to get and set per-protocol queue limits, and
get and clear drop counters, which query data or apply changes across
all workstreams.
- Add a more extensible netisr registration interface, in which
protocols declare 'struct netisr_handler' structures for each
registered NETISR_ type. These include name, handler function,
optional mbuf to flow ID function, optional mbuf to CPU ID function,
queue limit, and ordering policy. Padding is present to allow these
to be expanded in the future. If no queue limit is declared, then
a default is used.
- Queue limits are now per-workstream, and raised from the previous
IFQ_MAXLEN default of 50 to 256.
- All protocols are updated to use the new registration interface, and
with the exception of netnatm, default queue limits. Most protocols
register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
NETISR_POLICY_FLOW, and will therefore take advantage of driver-
generated flow IDs if present.
- Formalize a non-packet based interface between interface polling and
the netisr, rather than having polling pretend to be two protocols.
Provide two explicit hooks in the netisr worker for start and end
events for runs: netisr_poll() and netisr_pollmore(), as well as a
function, netisr_sched_poll(), to allow the polling code to schedule
netisr execution. DEVICE_POLLING still embeds single-netisr
assumptions in its implementation, so for now if it is compiled into
the kernel, a single and un-bound netisr thread is enforced
regardless of tunable configuration.
In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.
Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.
An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking. It will be enabled once further rmlock
optimization has taken place. However, in practice, netisrs are
rarely registered or unregistered at runtime.
A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.
This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.
Bump __FreeBSD_version.
Reviewed by: bz
assigning ifnets from one vnet to another. Deletion of vnets is not
yet supported.
The interface is implemented as an ioctl extension so that no syscalls
had to be introduced. This should be acceptable given that the new
interface will be used for a short / interim period only, until the
new jail management framwork gains the capability of managing vnets.
This method for managing vimages / vnets has been in use for the past
7 years without any observable issues.
The userland tool to be used in conjunction with the interim API can be
found in p4: //depot/projects/vimage-commit2/src/usr.sbin/vimage/... and
will most probably never get commited to svn.
While here, bump copyright notices in kern_vimage.c and vimage.h to
cover work done in year 2009.
Approved by: julian (mentor)
Discussed with: bz, rwatson
CPU for too long period than necessary. Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.
In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).
Bump __FreeBSD_version in order to signal such situation.
Reviewed by: emaste
Sponsored by: Sandvine Incorporated
- Add rm_init_flags() and accept extended options only for that variation.
- Add a flags space specifically for rm_init_flags(), rather than borrowing
the lock_init() flag space.
- Define flag RM_RECURSE to use instead of LO_RECURSABLE.
- Define flag RM_NOWITNESS to allow an rmlock to be exempt from WITNESS
checking; this wasn't possible previously as rm_init() always passed
LO_WITNESS when initializing an rmlock's struct lock.
- Add RM_SYSINIT_FLAGS().
- Rename embedded mutex in rmlocks to make it more obvious what it is.
- Update consumers.
- Update man page.
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
to optionally have overlapping unit numbers if attached in different
vnets.
At this stage if_loop is the only clonable ifnet class that has been
extended to allow for such overlapping allocation of unit numbers, i.e.
in each vnet it is possible to have a lo0 interface. Other clonable ifnet
classes remain to operate with traditional semantics, i.e. each instance
of a clonable ifnet will be assigned a globally unique unit number,
regardless in which vnet such an ifnet becomes instantiated.
While here, garbage collect unused _lo_list field in struct vnet_net,
as well as improve indentation for #defines in sys/net/vnet.h.
The layout of struct vnet_net has changed, therefore bump
__FreeBSD_version.
This change has no functional impact on nooptions VIMAGE kernel builds.
Reviewed by: bz, brooks
Approved by: julian (mentor)
for reassigning ifnets from one vnet to another.
if_vmove() works by calling a restricted subset of actions normally
executed by if_detach() on an ifnet in the current vnet, and then
switches to the target vnet and executes an appropriate subset of
if_attach() actions there.
if_attach() and if_detach() have become wrapper functions around
if_attach_internal() and if_detach_internal(), where the later
variants have an additional argument, a flag indicating whether a
full attach or detach sequence is to be executed, or only a
restricted subset suitable for moving an ifnet from one vnet to
another. Hence, if_vmove() will not call if_detach() and if_attach()
directly, but will call the if_detach_internal() and
if_attach_internal() variants instead, with the vmove flag set.
While here, staticize ifnet_setbyindex() since it is not referenced
from outside of sys/net/if.c.
Also rename ifccnt field in struct vimage to ifcnt, and do some minor
whitespace garbage collection where appropriate.
This change should have no functional impact on nooptions VIMAGE kernel
builds.
Reviewed by: bz, rwatson, brooks?
Approved by: julian (mentor)
route is also being deleted, the link-layer address table
(arp or nd6) will flush those L2 llinfo entries that match
the removed prefix.
Reviewed by: kmacy
direct dispatch policy for specific protocols (NETISR_USB). We leave
the additional 'flags' argument to netisr_register() for the time being,
even though it is no longer required.
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:
1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:
options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet
2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:
INIT_VNET_NET(ifp->if_vnet); becomes
struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];
3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.
4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.
5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.
6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.
Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.
Reviewed by: bz, rwatson
Approved by: julian (mentor)
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.
Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)
interface pointer, but also a reference to it.
Modify ifioctl() to use ifunit_ref(), holding the reference until
all ioctls, etc, have completed.
This closes a class of reader-writer races in which interfaces
could be removed during long-running ioctls, leading to crashes.
Many other consumers of ifunit() should now use ifunit_ref() to
avoid similar races.
MFC after: 3 weeks
pointers to "dead" implementations that no-op rather than invoking
the device driver. This would generally be unexpected and
possibly quite badly handled by most device drivers after
if_detach() has completed.
Reviewed by: bms
MFC after: 3 weeks
if_alloc(), and portions of data structure destruction from if_detach()
to if_free(). These changes leave more of the struct ifnet in a
safe-to-access condition between alloc and attach, and between detach
and free, and focus on attach/detach as stack usage events rather than
data structure initialization.
Affected fields include the linkstate task queue, if_afdata lock,
address lists, kqueue state, and MAC labels. ifq_attach() ifq_detach()
are not moved as ifq_attach() may use a queue length set by the device
driver between if_alloc() and if_attach().
MFC after: 3 weeks
calls if_free(), and remains set if the refcount is elevated. IF_DYING
skips the bit in the if_flags bitmask previously used by IFF_NEEDSGIANT,
so that an MFC can be done without changing which bit is used, as
IFF_NEEDSGIANT is still present in 7.x.
ifnet_byindex_ref() checks for IFF_DYING and returns NULL if it is set,
preventing new references from by acquired by index, preventing
monitoring sysctls from seeing it. Other lookup mechanisms currently
do not check IFF_DYING, but may need to in the future.
MFC after: 3 weeks
after the corresponding interface has been destroyed:
(1) Add an ifnet refcount, ifp->if_refcount. Initialize it to 1 in
if_alloc(), and modify if_free_type() to decrement and check the
refcount.
(2) Add new if_ref() and if_rele() interfaces to allow kernel code
walking global interface lists to release IFNET_[RW]LOCK() yet
keep the ifnet stable. Currently, if_rele() is a no-op wrapper
around if_free(), but this may change in the future.
(3) Add new ifnet field, if_alloctype, which caches the type passed
to if_alloc(), but unlike if_type, won't be changed by drivers.
This allows asynchronous free's of the interface after the
driver has released it to still use the right type. Use that
instead of the type passed to if_free_type(), but assert that
they are the same (might have to rethink this if that doesn't
work out).
(4) Add a new ifnet_byindex_ref(), which looks up an interface by
index and returns a reference rather than a pointer to it.
(5) Fix if_alloc() to fully initialize the if_addr_mtx before hooking
up the ifnet to global lists.
(6) Modify sysctls in if_mib.c to use ifnet_byindex_ref() and release
the ifnet when done.
When this change is MFC'd, it will need to replace if_ispare fields
rather than adding new fields in order to avoid breaking the binary
interface. Once this change is MFC'd, if_free_type() should be
removed, as its 'type' argument is now optional.
This refcount is not appropriate for counting mbuf pkthdr references,
and also not for counting entry into the device driver via ifnet
function pointers. An rmlock may be appropriate for the latter.
Rather, this is about ensuring data structure stability when reaching
an ifnet via global ifnet lists and tables followed by copy in or out
of userspace.
MFC after: 3 weeks
Reported by: mdtancsa
Reviewed by: brooks
- fix bug where tail pointer of the free list would not get advanced
- clear entry's next pointer when it is added to the freelist to avoid freeing
an entry that it still points to
as well as providing stateful load balancing when used with RADIX_MPATH.
- Currently compiled in to i386 and amd64 but disabled by default, it can be enabled at
runtime with 'sysctl net.inet.flowtable.enable=1'.
- Embedded users can remove it entirely from the kernel by adding 'nooption FLOWTABLE' to
their kernel config files.
- A minimal hookup will be added to ip_output in a subsequent commit. I would like to see
more review before bringing in changes that require more churn.
Supported by: Bitgravity Inc.
- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel. This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.
MFC after: 3 days
dependency tracking and ordering enforcement.
With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.
The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.
The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.
For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.
A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.
Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.
The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.
Reviewed by: bz
Approved by: julian (mentor)
when using the "self" keyword in tables or as ()-style host address and
fixes "ifconfig -g all" output.
PR: kern/130977, kern/131310
Submitted by: Mikolaj Golub
MFC after: 3 days
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
handle the ioctl. There are other paths that already call it, but this
allows for a non-interface socket (like AF_LOCAL which ifconfig now
uses) to use a broader class of interface ioctls.
Approved by: bz (mentor), rwatson
no-op's that I inadvertently added. Even if locking is needed in general
for the ioctl's, setting a single long will not need it due to the operation
being atomic.
Reported by: rwatson
LO_CSUM_FEATURES - a bitmask of supported transmit offload features, which
will be stored in if_hwassist if IFCAP_TXCSUM is enabled, and be cleared
from mbuf packet header csum flags on transmit. (1)
LO_CSUM_SET - a bitmask of supported receive offload features, which will
be set on the mbuf packet header csum flags on transmit if IFCAP_RXCSUM
is enabled.
While here, fix SCTP offload for loopback: offer generation on the
transmit side, don't just skip validation on the receive side.
Obtained from: DragonflyBSD (1)
MFC after: 1 week
have its MTU set higher than 1500 (ETHERMTU). Its new limit is now
65535 as enforced by ifhwioctl() in if.c
This allows a tap(4) device to be added to a bridge, which requires all
interface members to have the same MTU, with an interface configured for
jumbo frames. QEMU may now connect to a network via tap(4) without
requiring the real interface to have its MTU set to 1500 or lower.
Reviewed by: rpaulo, bms
MFC after: 1 week
avoidance:
- Enable setting the RXCSUM and TXCSUM flags for loopback interfaces;
set both by default.
- When RXCSUM is set, flag packets sent over the loopback interface as
having checked and valid IP, UDP, TCP checksums so that higher
protocol layers won't check them.
- Always clear CSUM_{IP,UDP_TCP} checksum required flags on transmit,
as they will have gotten there as a result of TXCSUM being set.
This is done only for packets explicitly sent over the loopback, not
simulated loopback via if_simloop() due to !SIMPLEX interfaces, etc.
Note that enabling TXCSUM but not RXCSUM will lead to unhappiness, as
checksums won't be generated but will be validated.
Kris reports that this leads to significant performance improvements
in loopback benchmarking with TCP and UDP for throughput:
RXCSUM RXCSUM+TXCSUM
TCP 15% 37%
UDP 10% 74%
Update man page.
Reviewed by: sam
Tested by: kris
MFC after: 1 week
in FreeBSD 5.x to allow network device drivers to run with Giant
despite the network stack being Giant-free. This significantly
simplifies calls into ioctl() on network interfaces, especially
in the multicast code, as well as eliminates deferred invocation
of interface if_start routines.
Disable the build on device drivers still depending on
IFF_NEEDSGIANT as they no longer compile. They will be removed
in a few weeks if they haven't been made MPSAFE in that time.
Disabled drivers:
if_ar
if_axe
if_aue
if_cdce
if_cue
if_kue
if_ray
if_rue
if_rum
if_sr
if_udav
if_ural
if_zyd
Drivers that were already disabled because of tty changes:
if_ppp
if_sl
Discussed on: arch@
consumers which fork after the shared pages have been setup. pflogd(8)
is an example. The problem is understood and there is a fix coming in
shortly.
Folks who want to continue using it can do so by setting
net.bpf.zerocopy_enable
to 1.
Discussed with: rwatson
are not currently owned by userspace before clearing or rotating them.
Otherwise we may not play by the rules of the shared memory protocol,
potentially corrupting packet data or causing userspace applications
that are playing by the rules to spin due to being notified that a
buffer is complete but the shared memory header not reflecting that.
This behavior was seen with pflogd by a number of reporters; note that
this fix is not sufficient to get pflogd properly working with
zero-copy BPF, due to pflogd opening the BPF device before forking,
leading to the shared memory buffer not being propery inherited in the
privilege-separated child. We're still deciding how to fix that
problem.
This change exposes buffer-model specific strategy information in
reset_d(), which will be fixed at a later date once we've decided how
best to improve the BPF buffer abstraction.
Reviewed by: csjp
Reported by: keramida
