on future UltraSPARC cpus for which the data cache is not direct mapped.
- Move UltraSPARC I and II (spitfire, blackbird, sapphire, sabre) specific
functions to spitfire.c, and add cheetah.c for UltraSPARC III specific
functions. Initially just cache flushing, but there are a few other
functions that will need to move here.
- Add an ipi handler for data cache flushing on UltraSPARC III.
- Use function pointers to select the right cache flushing functions based
on cpu_impl.
With this it is possible to boot single user from an mfs root on UltraSPARC
III systems, including spinning up secondary processors. There is currently
no support for the host to pci bridge, and no documentation for it is
publically available.
Thanks to Oleg Derevenetz for providing access to a system with UltraSPARC
III+ cpus.
UltraSPARC III and higher cpus and do needed setup.
- Disable the "system tick" interrupt for UltraSPARC III. This avoids
an interrupt storm on startup since we're not prepared for these at
all. This feature has questionable use anyway.
- Clear tick on startup and then leave it alone.
kse_mailbox to schedule an upcall, this is useful for userland timeout
routine, for example pthread_cond_timedwait().
Also extract upcall scheduling code from kse_reassign and create
a new function called thread_switchout to include these code.
Reviewed by: julain
the devstat is for an "interior" GEOM node and register using the
name argument as a geom identity pointer. Do not put these devstat
structures on the list returned by the sysctl.
This gives us the ability to tell the two kinds of nodes apart and
leave the current "strictly physical" view of devstat intact without
modifications, yet be able to use devstat for both kinds of devices.
It also saves us bloating struct devstat with another 48 bytes of
space for the name. At least for now.
Reviewed by: ken
Add a mutex and protect the allocation and traversal of the list with it.
When we allocate a page for devstat use we drop the mutex and use
M_WAITOK this is not nice, but under the given circumstances the
best we can do.
In the sysctl handler for returning the devstat entries we do not want to
hold the mutex across copyout(9) calls, so we keep a very careful eye on
the devstat_generation count, and abandon with EBUSY if it changes under
our feet.
Specifically test for BIO_WRITE, rather than default non-read,non-deletes
as write. Make the default be DEVSTAT_NO_DATA.
Add atomic increments of the sequence[01] fields so applications using the
mmap'ed view stand a chance of detecting updates in progress.
Reviewed by: ken
driver should use port or memory based IO, determine it dynamically
at runtime, preferring MMIO where possible. This helps us support newer
arches which dislike port based access better.
Tested on i386 & sparc64, with 3c900, 905, 905b, and 905C cards.
(in varying combinations by both jake and myself)
one tx buffer for these cards. The old driver only used one. We use
1 for symbol, and 3 for prism cards.
o Don't do the maximum loops thing in the ISR. In fact, revert to the
old interrupt handler. Lucent cards don't seem to work too well if
you don't disable/enable interrupts from the card in the ISR.
Between these two changes, Lucent cards suck less. They work in
autoselect mode only. And seem to get 1Mbps or 2Mbps only. Setting a
specific media speed doesn't work, and I've had a few issues even with
these patches. They turn a former brick into a nearly useful card.
These patches work on the prism 2 and 2.5 PC Card cards that I have.
I've not tested this on PCI cards. I suspect, but couldn't find
proof, that they were the reason that the ISR was changed so radically
from its FreeBSD roots in NetBSD. We might need to have a variant ISR
if so.
4 bits. This reportedly fixes booting on the SW7500CW2. Much thanks to
the submitter for tracking this down!
Submitted by: Brian Buchanan <brian@ncircle.com>
Reviewed by: peter
MFC after: 3 days
- Use SYSINIT to initialize the structures instead of checking
total_bpages against 0 in alloc_bounce_pages(), which could lead
to several initializations being done at the same time.
- Add missing locking in bus_dmamap_load(), the bounce pages mutex
must be held when calling reserve_bounce_pages() and when touching
the bounce_map_waitinglist list.
- Remove the useless splhigh() and splx() calls.
- Assert that the bounce pages mutex is held in reserve_bounce_pages()
to catch regressions.
code both seem to call wi_start (directly or via the if_start pointer)
without checking to see if OACTIVE is 0. In addition, I think that
with the use of 3 transmit buffers this routine can be called with
OACTIVE set, but I might be mistaken about that (and it doesn't
matter).
Reviewed by: sam
Noticed by: imp, alfred, ambrisko
but I decided that it was important for this patch to not bit-rot, and
since it is mainly moving code around, the total amount of entropy is
epsilon /phk)
This is a patch to move the common parts of linux_getcwd() back into
kern/vfs_cache.c so that the standard FreeBSD libc getcwd() can use it's
extended functionality. The linux syscall linux_getcwd() in
compat/linux/linux_getcwd.c has been rewritten to use it too. It should
be possible to simplify libc's getcwd() after this. No doubt this code
needs some cleaning up, since I've left in the sysctl variables I used
for debugging.
PR: 48169
Submitted by: James Whitwell <abacau@yahoo.com.au>
to avoid a "locking against myself" panic when udf_hashins() tries
to lock it again. Lock the vnode in udf_hashins() before adding it to
the hash bucket.
are machine dependent because they are not required to update the tlb when
mappings are added or removed, and doing so is machine dependent.
In addition, an implementation may require that pages mapped with pmap_kenter
have a backing vm_page_t, which is not necessarily true of all physical
pages, and so may choose to pass the vm_page_t to pmap_kenter instead of the
physical address in order to make this requirement clear.
