Commit Graph

78 Commits

Author SHA1 Message Date
bz
0a90ef1728 MFP4: @176978-176982, 176984, 176990-176994, 177441
"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by:	jhb
Discussed with:	rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	CK Software GmbH
MFC after:	6 days
2010-04-29 11:52:42 +00:00
bz
e66b2bd00b Make sure IPv6 source address selection does not change interface
addresses while walking the IPv6 address list if in the jail case
something is connecting to ::1.

Reported by:	Pieter de Boer (pieter thedarkside.nl)
Tested by:	Pieter de Boer (pieter thedarkside.nl)
MFC after:	4 days
2010-04-27 15:05:03 +00:00
bz
d80ba03e3c Add ip4.saddrsel/ip4.nosaddrsel (and equivalent for ip6) to control
whether to use source address selection (default) or the primary
jail address for unbound outgoing connections.

This is intended to be used by people upgrading from single-IP
jails to multi-IP jails but not having to change firewall rules,
application ACLs, ... but to force their connections (unless
otherwise changed) to the primry jail IP they had been used for
years, as well as for people prefering to implement similar policies.

Note that for IPv6, if configured incorrectly, this might lead to
scope violations, which single-IPv6 jails could as well, as by the
design of jails. [1]

Reviewed by:	jamie, hrs (ipv6 part)
Pointed out by:	hrs [1]
MFC After:	2 weeks
Asked for by:	Jase Thew (bazerka beardz.net)
2010-01-17 12:57:11 +00:00
qingli
0cca60c70d This patch fixes the following issues:
- Interface link-local address is not reachable within the
  node that owns the interface, this is due to the mismatch
  in address scope as the result of the installed interface
  address loopback route. Therefore for each interface
  address loopback route, the rt_gateway field (of AF_LINK
  type) will be used to track which interface a given
  address belongs to. This will aid the address source to
  use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
  the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
  only for validation reason. Doing so will eliminate as much
  of the special case (loopback addresses) handling code
  as possible, however, these empty nd6 entries should not
  be returned to the userland applications such as the
  "ndp" command.
Since both of the above issues contain common files, these
files are committed together.

Reviewed by:	bz
MFC after:	immediately
2009-09-05 16:43:16 +00:00
rwatson
fb9ffed650 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
rwatson
88f8de4d40 Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
rwatson
57ca4583e7 Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
rwatson
bd6eb7be79 Add address list locking for in6_ifaddrhead/ia_link: as with locking
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.

Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.

Reviewed by:	bz
MFC after:	6 weeks
2009-06-25 16:35:28 +00:00
rwatson
9c4380a8ee Convert netinet6 to using queue(9) rather than hand-crafted linked lists
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead).  Adopt
the code styles and conventions present in netinet where possible.

Reviewed by:	gnn, bz
MFC after:	6 weeks (possibly not MFCable?)
2009-06-24 21:00:25 +00:00
bz
a8839212d2 Make callers to in6_selectsrc() and in6_pcbladdr() pass in memory
to save the selected source address rather than returning an
unreferenced copy to a pointer that might long be gone by the
time we use the pointer for anything meaningful.

Asked for by:	rwatson
Reviewed by:	rwatson
2009-06-23 22:08:55 +00:00
rwatson
c9ef486fe1 Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references.  The following routines now return references:

  ifaddr_byindex
  ifa_ifwithaddr
  ifa_ifwithbroadaddr
  ifa_ifwithdstaddr
  ifa_ifwithnet
  ifaof_ifpforaddr
  ifa_ifwithroute
  ifa_ifwithroute_fib
  rt_getifa
  rt_getifa_fib
  IFP_TO_IA
  ip_rtaddr
  in6_ifawithifp
  in6ifa_ifpforlinklocal
  in6ifa_ifpwithaddr
  in6_ifadd
  carp_iamatch6
  ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

  IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc).  In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit.  Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by:	bz
Obtained from:	Apple, Inc. (portions)
MFC after:	6 weeks (portions)
2009-06-23 20:19:09 +00:00
zec
c85551e0bc First pass at separating per-vnet initializer functions
from existing functions for initializing global state.

        At this stage, the new per-vnet initializer functions are
	directly called from the existing global initialization code,
	which should in most cases result in compiler inlining those
	new functions, hence yielding a near-zero functional change.

        Modify the existing initializer functions which are invoked via
        protosw, like ip_init() et. al., to allow them to be invoked
	multiple times, i.e. per each vnet.  Global state, if any,
	is initialized only if such functions are called within the
	context of vnet0, which will be determined via the
	IS_DEFAULT_VNET(curvnet) check (currently always true).

        While here, V_irtualize a few remaining global UMA zones
        used by net/netinet/netipsec networking code.  While it is
        not yet clear to me or anybody else whether this is the right
        thing to do, at this stage this makes the code more readable,
        and makes it easier to track uncollected UMA-zone-backed
        objects on vnet removal.  In the long run, it's quite possible
        that some form of shared use of UMA zone pools among multiple
        vnets should be considered.

	Bump __FreeBSD_version due to changes in layout of structs
	vnet_ipfw, vnet_inet and vnet_net.

Approved by:	julian (mentor)
2009-04-06 22:29:41 +00:00
jamie
12bbe1869f Standardize the various prison_foo_ip[46] functions and prison_if to
return zero on success and an error code otherwise.  The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family.  For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.

Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes).  Remove the explicit
jailed() checks that preceded many of the function calls.

Approved by:	bz (mentor)
2009-02-05 14:06:09 +00:00
kmacy
54c2e2ce52 check return from lla_lookup against NULL not zero 2008-12-16 02:30:42 +00:00
bz
03f6bb9dc9 Another step assimilating IPv[46] PCB code - directly use
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().

Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.

Discussed with:	rwatson
Reviewed by:	rwatson (version before review requested changes)
MFC after:	4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
qingli
ec826ad5c7 This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
bz
604d89458a Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
bz
d2730d5b27 MFp4:
Bring in updated jail support from bz_jail branch.

This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..

SCTP support was updated and supports IPv6 in jails as well.

Cpuset support permits jails to be bound to specific processor
sets after creation.

Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.

DDB 'show jails' command was added to aid debugging.

Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.

Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.

Bump __FreeBSD_version for the afore mentioned and in kernel changes.

Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
  and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
  help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
  suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
  on cluster machines as well as all the testers and people
  who provided feedback the last months on freebsd-jail and
  other channels.
- My employer, CK Software GmbH, for the support so I could work on this.

Reviewed by:	(see above)
MFC after:	3 months (this is just so that I get the mail)
X-MFC Before:   7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
zec
95a15f5c84 Merge more of currently non-functional (i.e. resolving to
whitespace) macros from p4/vimage branch.

Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.

De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.

Reviewed by:  bz, julian
Approved by:  julian (mentor)
Obtained from:        //depot/projects/vimage-commit2/...
X-MFC after:  never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
zec
815d52c5df Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
des
66f807ed8b Retire the MALLOC and FREE macros. They are an abomination unto style(9).
MFC after:	3 months
2008-10-23 15:53:51 +00:00
bz
0991899a98 Bring over the change switching from using sequential to random
ephemeral port allocation as implemented in netinet/in_pcb.c rev. 1.143
(initially from OpenBSD) and follow-up commits during the last four and
a half years including rev. 1.157, 1.162 and 1.199.
This now is relying on the same infrastructure as has been implemented
in in_pcb.c since rev. 1.199.

Reviewed by:	silby, rpaulo, mlaier
MFC after:	2 months
2008-10-20 18:43:59 +00:00
zec
8797d4caec Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
bz
1021d43b56 Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
bz
362cb79214 Pass the ucred along into in{,6}_pcblookup_local for upcoming
prison checks.

Reviewed by:	rwatson
2008-07-10 13:31:11 +00:00
bz
c0ef832fd2 Document required locking in in6_sleectsrc() in case an inp is
passed in by adding an assert.

Requested by:	rwatson
Reviewed by:	rwatson
2008-07-09 16:33:21 +00:00
bz
13896f2e51 Change the parameters to in6_selectsrc():
- pass in the inp instead of both in6p_moptions and laddr.
 - pass in cred for upcoming prison checks.

Reviewed by:	rwatson
2008-07-08 18:41:36 +00:00
rwatson
ca47fccd6b Convert pcbinfo and inpcb mutexes to rwlocks, and modify macros to
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.

This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.

MFC after:	3 months
Tested by:	kris (superset of committered patch)
2008-04-17 21:38:18 +00:00
qingli
4e8901ea7a This patch provides the back end support for equal-cost multi-path
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,

	route add -net 192.103.54.0/24 10.9.44.1
	route add -net 192.103.54.0/24 10.9.44.2

The second route insertion will trigger an error message of
"add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"

Multiple default routes can also be inserted. Here is the netstat
output:

default		10.2.5.1	UGS	0	3074	bge0 =>
default		10.2.5.2	UGS	0	0	bge0

When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,

	route delete default

would fail and trigger the following error message:

"route: writing to routing socket: No such process"
"delete net default: not in table"

On the other hand,

	route delete default 10.2.5.2

would be successful: "delete net default: gateway 10.2.5.2"

One does not have to specify a gateway if there is only a single
route for a particular destination.

I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options  RADIX_MPATH" in the kernel configuration
to enable this feature.

Reviewed by:	robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
bz
866f483083 Correct the commented out debugging printf()s in REPLACE and NEXT macros.
ip6_sprintf() needs a buffer as first argument these days.

MFC after:	2 weeks
2008-01-20 10:08:15 +00:00
obrien
7eb385c2d8 un-__P() 2008-01-08 19:08:58 +00:00
obrien
0d684d927b Clean up VCS Ids. 2007-12-10 16:03:40 +00:00
delphij
42fe5e7f83 Space cleanup
Approved by:	re (rwatson)
2007-07-05 16:29:40 +00:00
delphij
e6f8b0995d ANSIfy[1] plus some style cleanup nearby.
Discussed with:	gnn, rwatson
Submitted by:	Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by:	re (rwatson)
2007-07-05 16:23:49 +00:00
rwatson
00b02345d4 Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.

Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.

We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths.  Do, however, move those prototypes to priv.h.

Reviewed by:	csjp
Obtained from:	TrustedBSD Project
2007-06-12 00:12:01 +00:00
rwatson
c27ef03414 Rename some fields of struct inpcbinfo to have the ipi_ prefix,
consistent with the naming of other structure field members, and
reducing improper grep matches.  Clean up and comment structure
fields in structure definition.
2007-04-30 23:12:05 +00:00
jhb
b0b93a3c55 Optimize sx locks to use simple atomic operations for the common cases of
obtaining and releasing shared and exclusive locks.  The algorithms for
manipulating the lock cookie are very similar to that rwlocks.  This patch
also adds support for exclusive locks using the same algorithm as mutexes.

A new sx_init_flags() function has been added so that optional flags can be
specified to alter a given locks behavior.  The flags include SX_DUPOK,
SX_NOWITNESS, SX_NOPROFILE, and SX_QUITE which are all identical in nature
to the similar flags for mutexes.

Adaptive spinning on select locks may be enabled by enabling the
ADAPTIVE_SX kernel option.  Only locks initialized with the SX_ADAPTIVESPIN
flag via sx_init_flags() will adaptively spin.

The common cases for sx_slock(), sx_sunlock(), sx_xlock(), and sx_xunlock()
are now performed inline in non-debug kernels.  As a result, <sys/sx.h> now
requires <sys/lock.h> to be included prior to <sys/sx.h>.

The new kernel option SX_NOINLINE can be used to disable the aforementioned
inlining in non-debug kernels.

The size of struct sx has changed, so the kernel ABI is probably greatly
disturbed.

MFC after:	1 month
Submitted by:	attilio
Tested by:	kris, pjd
2007-03-31 23:23:42 +00:00
bz
297206ec2a MFp4: 92972, 98913 + one more change
In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
2006-12-12 12:17:58 +00:00
rwatson
10d0d9cf47 Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
brooks
bc6ab54808 With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.
2006-08-04 21:27:40 +00:00
tanimura
713caab1d6 Avoid spurious release of an rtentry. 2006-05-23 00:32:22 +00:00
rwatson
7c7c50f35d Move lock assertions to top of in6_pcbladdr(): we still want them to run
even if we're going to return an argument-based error.

Assert pcbinfo lock in in6_pcblookup_local(), in6_pcblookup_hash(), since
they walk pcbinfo inpcb lists.

Assert inpcb and pcbinfo locks in in6_pcbsetport(), since
port reservations are changing.

MFC after:	3 months
2006-04-25 12:09:58 +00:00
suz
412574c368 sync with KAME (removed a unnecesary non-standard macro)
Obtained from: KAME
Reviewd by: ume, gnn
2005-10-19 16:53:24 +00:00
ume
d73a48f4b8 - fix race condition using sx lock.
- use TAILQ_FOREACH() for readability.

Suggested by:	jhb
2005-08-17 16:46:55 +00:00
ume
0b8c72b90b avoid exclusive sleep mutex. 2005-08-16 19:49:10 +00:00
ume
fe6f4a34b3 - fix typo in comment.
- nuke unused code.

Submitted by:	suz
Obtained from:	KAME
2005-08-12 15:27:25 +00:00
ume
0c95d55c4d nuke duplicate inclusion of scope6_var.h. 2005-07-26 11:46:15 +00:00
ume
da2cf62b28 scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
  scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
  scoped addresses as a special case.
- scope boundary check will be stricter.  For example, the current
  *BSD code allows a packet with src=::1 and dst=(some global IPv6
  address) to be sent outside of the node, if the application do:
    s = socket(AF_INET6);
    bind(s, "::1");
    sendto(s, some_global_IPv6_addr);
  This is clearly wrong, since ::1 is only meaningful within a single
  node, but the current implementation of the *BSD kernel cannot
  reject this attempt.

Submitted by:	JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from:	KAME
2005-07-25 12:31:43 +00:00
gnn
c853caca3e Fixes for various nits found by the Coverity tool.
In particular 2 missed return values and an inappropriate bcopy from
a possibly NULL pointer.

Reviewed by:	jake
Approved by:	rwatson
MFC after:	1 week
2005-05-15 02:28:30 +00:00
imp
2b54eeafae /* -> /*- for license, minor formatting changes, separate for KAME 2005-01-07 02:30:35 +00:00