Just like a similar change we made to the TTY code about half a year
ago, make these strings look similar.
Suggested by: Jille Timmermans <jille@quis.cx>
Now that pty(4) is a loadable kernel module, I'd better move /dev/ptmx
in there as well. This means that pty(4) now provides almost all
pseudo-terminal compatibility code. This means it's very easy to test
whether applications use the proper library interfaces when allocating
pseudo-terminals (namely posix_openpt and openpty).
Unfortunately, the wrappers that are present in pts(4) don't have the
mechanics to allow pty(4) to be unloaded safely, so I'm forcing this kld
to return EBUSY. This also means we have to enable some extra code in
pts(4) unconditionally.
Proposed by: rwatson
I noticed several drivers in our tree don't actually care about parity
and framing, such as pts(4), snp(4) (and my partially finished console
driver). Instead of duplicating a lot of code, I think we'd better add a
utility function for those drivers to quickly process a buffer of input.
Also change pts(4) and snp(4) to use this function.
- fix write() on pseudo-terminal masters to return the amount of bytes
passed to the TTY, not the amount of bytes read from user.
- fix ttydisc_rint_bypass() to set the high watermark when it cannot
write all input, just like ttydisc_rint() itself.
Approved by: re (kib)
As pointed out, POLLHUP should be generated, even if it hasn't been
specified on input. It is also not allowed to return both POLLOUT and
POLLHUP at the same time.
Reported by: jilles
Approved by: re (kib)
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.
The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
This allows users to increase the maximum amount of pseudo-terminals
without changing any source code. Users must increase UT_LINESIZE before
attempting to increase kern.pts_maxdev.
It's better to just use internal language constructs, because it is
likely the compiler has a better opinion on whether to perform inlining,
which is very likely to happen to struct winsize.
Submitted by: Christoph Mallon <christoph mallon gmx de>
- Don't return a negative errno when using an unknown ioctl() on a
pseudo-terminal master device. Be sure to convert ENOIOCTL to ENOTTY,
just like the TTY layer does.
- Even though we should return st_rdev of the master device node when
emulating pty(4) devices, FIODGNAME should still return the name of
the slave device. Otherwise ptsname(3) and ttyname(3) return an
invalid device name.
Inside ptsdrv_{in,out}wakeup() we call KNOTE_LOCKED() to wake up any
kevent(2) users. Because the kqueue handlers are executed synchronously,
we must set PTS_FINISHED before calling ptsdrv_{in,out}wakeup().
Discovered by: nork
All ioctl()'s that aren't implemented by pts(4) are forwarded to the TTY
itself. Unfortunately this is not correct for FIONREAD, because it will
give the wrong amount of bytes that are available to read.
Tested by: keramida
Reminded by: keramida
One thing I didn't expect many applications to use, was kqueue() on
pseudo-terminal master devices. There are applications that use kqueue()
on the TTY itself (rtorrent, etc). That doesn't mean we shouldn't
implement this. Libraries like libevent use kqueue() by default, which
means they wouldn't be able to use kqueue().
The old TTY layer implements a very broken version of kqueue() by
performing the actual polling on the TTY device.
Discussed with: peter
It turns out our old TTY layer (and other implementations) block when
you read() on a PTY master device of which the slave device node has not
been opened yet. Our new implementation just returned 0. This caused
applications like telnetd to die in a very subtle way (when child
processes would open the TTY later than the first call to select()).
Introduce a new flag called PTS_FINISHED, which indicates whether we
should block or bail out of a read() or write() occurs.
Reported by: Claude Buisson <clbuisson orange fr>
Because pseudo-terminal master file descriptors no longer have a vnode
underneath, we have to fill in fstat() values ourselves. Make our
implementation somewhat sane by returning the timestamps of the TTY
device node that corresponds with our file descriptor.
Obtained from: //depot/projects/mpsafettty/...
As reported by several users on the mailing lists, applications like
screen(1) fail to properly handle ^S and ^Q characters. This was because
MPSAFE TTY didn't implement packet mode (TIOCPKT) yet. Add basic packet
mode support to make these applications work again.
Obtained from: //depot/projects/mpsafetty/...
Unlike pre-MPSAFE TTY, the pts(4) driver always returned ENXIO when a
read() or write() was performed on a pseudo-terminal master device when
the slave device was not opened. The old implementation had different
semantics:
- When the slave device had not been opened yet, read() and write() just
blocked.
- When the slave device had been closed, a read() call would return 0
bytes length.
- When the slave device had been closed, a write() call would return
EIO.
Change the new implementation to return 0 and EIO as well. We don't
implement the first rule, but I suspect this is not needed, because
routines like openpty() also open the slave device node. posix_openpt()
users also do similar things.
Reported by: rink
Tested by: rink
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
Lock Giant in the clone handler.
Use destroy_dev_sched() explicitely from pty_maybecleanup() and postpone
pty_release() until both master and slave cdevs are destroyed by setting
it as callback for destroy_dev_sched().
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
- Sort by date in license blocks, oldest copyright first.
- All rights reserved after all copyrights, not just the first.
- Use (c) to be consistent with other entries.
MFC after: 3 days
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.
Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.
Reviewed by: bde (with contributions)
Tested by: emax, marius
MFC after: 1 week
this is more consistent with the placement of slaves in /dev/pts. The
actual name doesn't matter as it's not part of the exposed API or used by
libc. In some sense, it would be nice if these device nodes didn't have to
have names in devfs at all.
Suggested by: Stephen McKay <smckay at internode dot on dot net>
It should play nicely with the existing BSD ptys.
By default, the system will use the BSD ptys, one can set the sysctl
kern.pts.enable to 1 to make it use the new pts system.
The max number of pty that can be allocated on a system can be changed with the
sysctl kern.pts.max. It defaults to 1000, and can be increased, but it is not
recommanded, as any pty with a number > 999 won't be handled by whatever uses
utmp(5).
