If e_shnum or e_shstrndx are at least SHN_LORESERVE (0xff00) then an
escape value is used to indicate that the actual value is found in one
of section 0's fields.
Sponsored by: DARPA, AFRL
The FreeBSD Foundation and Google, Inc.[1]
Since this was dual-sponsored, the sponsorurl needs
to be empty.
Add Google to the sponsor.ent file.
Reminded by: rwatson [1]
Sponsored by: The FreeBSD Foundation
conv=sparse.
This change fixes two separate issues observed when the last output
block is all zeroes, and conv=sparse is in use. In this case, care
must be taken to roll back the last seek and write the entire last zero
block at the original offset where it should have occurred: when the
destination file is a block device, it is not possible to roll back
by just one character as the write would then not be properly aligned.
Furthermore, the buffer used to write this last all-zeroes block
needs to be properly zeroed-out. This was not the case previously,
resulting in a junk data byte appearing instead of a zero in the
output stream.
PR: bin/189174
PR: bin/189284
Reviewed by: kib
MFC after: 2 weeks
This actually completes r264743 so that width and precision
specifiers work properly with %n$. These keeps consistency
with ksh93 and zsh.
Requested by: jilles
Obtained from: Garrett D'Amore (Illumos)
MFC after: 4 days
sponsored and/or contributed works.
This works similarly to how the subversion revision is
suffixed in release notes entries when 'revision="NNNNNN"'
is set.
The <para> tag in relnotes/article.xml can now take the
following new elements:
- contrib: defined to what type of contribution the change
is. Right now, only 'vendor' or 'sponsor' are used.
'vendor' is intended for vendor-contributed code, such as
driver updates, etc. 'sponsor' is intended for sponsored
work (the 'Sponsored by:' in the commit template).
- vendor: The canonical name of the vendor.
- sponsor: The canonical name of the sponsor.
- vendorurl: The URL for the vendor website, if applicable.
- sponsorurl: The URL for the sponsor website, if applicable.
If 'vendor' or 'sponsor' are set, but 'contrib' is not, nothing
is rendered. If 'contrib' is set, but no 'vendor' or 'sponsor'
are defined, nothing is printed. If 'vendorurl' or 'sponsorurl'
are set, the 'vendor' or 'sponsor' text is link, otherwise is
non-clickable text.
Sponsored by: The FreeBSD Foundation
versions. With its movement to src.opts.mk, bsd.prog.mk was testing
COMPILER_TYPE without including the bsd.compiler.mk anymore. In the
source tree, this caused no problems, for reasons that aren't clear,
but does cause problems outside of the source tree. Allow
bsd.compiler.mk to be included multiple times safely, and always
include bsd.compiler.mk at the top of bsd.prog.mk. Resist the urge to
put it in bsd.init.mk, since that would reintroduce the implicit
include.
options, so move their processing there. This fixes issues with
Makefiles that define NO_MAN=t and only inlcude bsd.*.mk files. A few
ports fell into this category, and they should be fixed by this change.
Also, for now, disable the warning about NO_foo being deprecated. More
work is needed than anticipated before we can do that, so kill the
noise for now.
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by: scottl
MFC after: 3 days
Sponsored by: LSI
allowed range or when one or more pages are not mapped. This according to
The Open Group Base Specifications Issue 7.
Discussed with: attilio, Bruce Evans
Reviewed by: alc, Garrett Cooper
Reported by: ATF
MFC after: 2 weeks
Sponsored by: EMC / Isilon storage division
mprsas_SSU_to_SATA_devices().
This fixes an assertion on shutdown with INVARIANTS enabled with SATA
drives present on an IR firmware controller.
Reviewed by: Steve McConnell <stephen.mcconnell@avagotech.com>.
MFC after: 3 days
Implement a new -fstandalone-debug option. rdar://problem/15685848
It controls everything that -flimit-debug-info used to, plus the
vtable type optimization. The old -fno-limit-debug-info option is now an
alias to -fstandalone-debug and vice versa.
Standalone is the default on Darwin until dtrace is updated to work with
non-standalone debug info (rdar://problem/15758808).
Note: I kept the LimitedDebugInfo name in CodeGenOptions::DebugInfoKind
because NoStandaloneDebugInfo sounded even more confusing.
of C1.
This may not stay through 11.0-RELEASE, but at least having it
on by default in -HEAD will expose (more) issues with broken hardware.
Note: I have no plans or desire to MFC this to stable/10.
gettimeofday returns the system clock, which may jump forward or back,
especially if NTP is in use. If the time jumps backwards, then dd will see
negative elapsed time, round it up to 1usec, and print an absurdly fast
transfer rate.
The solution is to use clock_gettime(2) with CLOCK_MONOTONIC_PRECISE as the
clock_id. That clock advances steadily, regardless of changes to the system
clock.
Reviewed by: delphij
MFC after: 3 days
Sponsored by: Spectra Logic
sector granularity for both offset and length. Have all schemes
use mkimg_write() instead of mkimg_seek() followed by write(2).
Now that schemes don't use lseek(2) nor write(2) directly, it's
easier to support output formats other than raw disks.
file are always built the same.
(Note that Header and Localstuff must appear first and in that order, the
sorting does not affect as a coincident effect).
Submitted by: sjg
MFC after: 3 days
a journal block even when there are no journal entries to be written.
Until the root cause is found, handle this case by ensuring that a
valid journal segment is always written.
Second, the data buffer used for writing journal entries was never
being scrubbed of old data. Fix this.
Submitted by: Takehara Mikihito
Obtained from: Netflix, Inc.
MFC after: 3 days
4730 metaslab group taskq should be destroyed in metaslab_group_destroy()
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Original author: George Wilson
MFC after: 3 days
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
- Fix typos preventing -f to actually work with the create command.
- Initialize flags to zero rather than using stack garbage when handling
the grow command.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
environments (that I can't reproduce locally, but that others have
reported) seem to get tripped up by this man page install. There's
really no need to do it, so turn off the man pages using the most
portable method. We can't just directly set MK_MAN=no here because
we're bootstrapping in the host environment and such a setting was
forbidden until very recently. NO_MAN= can produce a warning, but for
now the warning is benign.
