o Forward termianl framebuffer ioctl to fbd.
o Forward terminal mmap request to fbd.
o Move inclusion of sys/conf.h to vt.h.
Sponsored by: The FreeBSD Foundation
Normal and bold fonts each have a glyph map for single or left half-
glyphs, and right half glyphs. The flag TF_CJK_RIGHT in term_char_t
requests the right half-glyph.
Reviewed by: ed@
Sponsored by: The FreeBSD Foundation
Introduce a new formatting bit (TF_CJK_RIGHT) that is set when putting a
cell that is the right part of a CJK fullwidth character. This will
allow drivers like vt(9) to support fullwidth characters properly.
emaste@ has a patch to extend vt(9)'s font handling to increase the
number of Unicode -> glyph maps from 2 ({normal,bold)} to 4
({normal,bold} x {left,right}). This will need to use this formatting
bit to determine whether to draw the left or right glyph.
Reviewed by: emaste
to fail and return error.
- Use make_dev_p() in tty_makedevf() instead of make_dev_cred().
- Always pass MAKEDEV_CHECKNAME flag.
- Optionally pass MAKEDEV_REF flag.
- Provide macro for compatibility with old API.
This fixes races with simultaneous creation and desctruction of
ttys, and makes it possible to call tty_makedevf() from device
cloners.
A race in tty_watermarks() still exist, since the latter drops
lock for M_WAITOK allocation. This will be addressed in separate
commit.
Reviewed by: kib
Sponsored by: Nginx, Inc.
This is to support LOCK_LOG_* functionality effectively in debugging
environments but it is overkill because really LOCK_DEBUG should be on
only if (KTR_COMPILE & KTR_LOCK) is true.
Fix this by applying the correct logic.
In this process, move the KTR classes to its own header to reduce
namespace pollution.
Sponsored by: EMC / Isilon storage division
Reviewed by: jhb
for extending and reusing it.
The sendfile_sync wrapper is mostly just a "mbuf transaction" wrapper,
used to indicate that the backing store for a group of mbufs has completed.
It's only being used by sendfile for now and it's only implementing a
sleep/wakeup rendezvous. However, there are other potential signaling
paths (kqueue) and other potential uses (socket zero-copy write) where the
same mechanism would also be useful.
So, with that in mind:
* extract the sendfile_sync code out into sf_sync_*() methods
* teach the sf_sync_alloc method about the current config flag -
it will eventually know about kqueue.
* move the sendfile_sync code out of do_sendfile() - the only thing
it now knows about is the sfs pointer. The guts of the sync
rendezvous (setup, rendezvous/wait, free) is now done in the
syscall wrapper.
* .. and teach the 32-bit compat sendfile call the same.
This should be a no-op. It's primarily preparation work for teaching
the sendfile_sync about kqueue notification.
Tested:
* Peter Holm's sendfile stress / regression scripts
Sponsored by: Netflix, Inc.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
This API has semantics similar to that of taskqueue_drain but acts on
all tasks that might be queued or running on a taskqueue.
A caller must ensure that no new tasks are being enqueued otherwise this
call would be totally meaningless. For example, if the tasks are
enqueued by an interrupt filter then its interrupt must be disabled.
MFC after: 10 days
given process.
Note that the correctness of the trampoline length returned for ABIs
which do not use shared page depends on the correctness of the struct
sysvec sv_szsigcodebase member, which will be fixed on as-need basis.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The new macros are implemented in terms of SDT_PROBE_DEFINE and SDT_PROBE.
Probes defined in this way will appear under SDT provider named "sdt".
Parameter types are exposed via SDT_PROBE_ARGTYPE.
This is something that illumos does not have by default.
This kind of SDT probes is already present in ZFS code, so those probes
will now be available if KDTRACE_HOOKS options is enabled.
A potential future illumos compatibility enhancement is to encode a provider
name as a prefix in a probe name.
Reviewed by: markj
MFC after: 3 weeks
X-MFC after: r258622
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
a very hard time to fully understand) with much more intuitive rights:
CAP_EVENT - when set on descriptor, the descriptor can be monitored
with syscalls like select(2), poll(2), kevent(2).
CAP_KQUEUE_EVENT - When set on a kqueue descriptor, the kevent(2)
syscall can be called on this kqueue to with the eventlist
argument set to non-NULL value; in other words the given
kqueue descriptor can be used to monitor other descriptors.
CAP_KQUEUE_CHANGE - When set on a kqueue descriptor, the kevent(2)
syscall can be called on this kqueue to with the changelist
argument set to non-NULL value; in other words it allows to
modify events monitored with the given kqueue descriptor.
Add alias CAP_KQUEUE, which allows for both CAP_KQUEUE_EVENT and
CAP_KQUEUE_CHANGE.
Add backward compatibility define CAP_POLL_EVENT which is equal to CAP_EVENT.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
in index 0 for the future.
- Move CAP_BINDAT and CAP_CONNECTAT rights to index 0 so we can include
CAP_LOOKUP right in them.
- Shuffle the bits around so there are no gaps. This is last chance to do
that as all moved rights are not used yet.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
CAP_SYMLINKAT and CAP_UNLINKAT capability rights make no sense without
the CAP_LOOKUP right, so include this rights.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
_KERNEL braces. Struct mount is only defined for the kernel build.
Reported and tested by: andreast
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
holding the vnode lock; vp->v_mount is checked first for NULL
equiality, and then dereferenced if not NULL. If vnode is reclaimed
meantime, second dereference would still give NULL. Change
VFS_PROLOGUE() to evaluate the mp once, convert MNTK_SHARED_WRITES and
MNTK_EXTENDED_SHARED tests into inline functions.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
rather than just void *.
Then, as part of this, convert a couple of mbuf m->m_data accesses
to mtod(m, const void *).
Reviewed by: markm
Approved by: security-officer (delphij)
Sponsored by: Netflix, Inc.
corresponding x86 trap type. Userland DTrace probes are currently handled
by the other fasttrap hooks (dtrace_pid_probe_ptr and
dtrace_return_probe_ptr).
Discussed with: rpaulo
bpf(4) and vlan(4) related event declarations to bpf.h and
if_vlan_var.h. To avoid dependency on eventhandler.h, protect
these declarations with ifdef SYS_EVENTHANDLER_H.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
vm_pages. Provide trivial implementation which forwards the load to
_bus_dmamap_load_phys() page by page. Right now all architectures use
bus_dmamap_load_ma_triv().
Tested by: pho (as part of the functional patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
* Remove the unused sdt cdev.
* Don't bother keeping a list of probes in struct sdt_prov; it's not needed.
* Invoke sdt_load and sdt_unload from the module handler instead of
registering separate SYSINITs.
* Keep to within 80 columns.
* Check for errors from dtrace_unregister().
