GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
that can be compiled on various OSes (including on older versions
of FreeBSD), make it possible to have it include the partitioning
scheme definitions without pulling in FreeBSD specifics.
In particular this means:
o move the scheme definitions iand related defines to header files
under sys/disk,
o make them (more) portable by using uint#_t (where applicable)
and renaming defines so that they at least have a good prefix,
o make the new headers stand-alone so that they don't need FreeBSD
definitions, like struct uuid(*)
o keep the original headers for compatibility, but rewrite them to
get the scheme definitions from <sys/disk/$scheme.h>.
(*) since UUID/GUID type definitions are non-portable and the GPT
scheme uses them, make it possible to have the scheme definitions
use an external type by allowing consumers of the header to set
GPT_UUID_TYPE. When GPT_UUID_TYPE has not been defined, the header
will use it's own type definition, which is the same as struct uuid.
The gpt_uuid_t typedef is created to abstract the details and allows
consumers to refer to a single type.
There is not conflict between the partitioning scheme headers and
what is defined in them. All headers can be included in the same
source files.
Note: consumers of the old headers have not been changed yet. Such
will be done if and when needed/beneficial.
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: Bracket Computing
evdev is a generic input event interface compatible with Linux
evdev API at ioctl level. It allows using unmodified (apart from
header name) input evdev drivers in Xorg, Wayland, Qt.
This commit has only generic kernel API. evdev support for individual
hardware drivers like ukbd, ums, atkbd, etc. will be committed later.
Project was started by Jakub Klama as part of GSoC 2014. Jakub's
evdev implementation was later used as a base, updated and finished
by Vladimir Kondratiev.
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Reviewed by: adrian, hans
Differential Revision: https://reviews.freebsd.org/D6998
This is being done to clearly distinguish the libkqueue tests
from the (soon to be imported) NetBSD tests.
MFC after: 58 days
Sponsored by: EMC / Isilon Storage Division
For all locales with variants:
- if no ambiguity on the locale (only one variant) just use the regular name
- if ambiguity, pick one as default and append @<variant> to the others
respecting POSIX
As a result:
- All the 3 components locales added recently are renamed to the usual 2
components version for all but sr_RS.UTF-8
- Set sr_RS.UTF-8 to the cyrillic variant
- Add sr_RS.UTF-8@latin
- Remove the symlinks aliases they were created to represent the 2 components
version as aliasas and are now useless
- Update the OptionalObsoleteFiles.inc and ObsoleteFiles.inc to reflect those
changes
Discussed with: ache@
Approved by: re@ (gjb)
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
convname and dst are guaranteed to be non-NULL by iconv_open(3).
src is an array. Remove these tests for NULL pointers.
While I'm here, eliminate a strlcpy with a correct but suspicious-looking
calculation for the third parameter (i.e. not a simple sizeof).
Compare the strings in-place instead of copying.
Found by: bdrewery
Found by: Coverity
CID: 1130050, 1130056
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6338
Update libarchive to 3.2.0
New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive
Patched files (fixed compiler warnings):
contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)
MFC after: 1 month
Relnotes: yes
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
control algorithm options. The argument is variable length and is opaque
to TCP, forwarded directly to the algorithm's ctl_output method.
Provide new includes directory netinet/cc, where algorithm specific
headers can be installed.
The new API doesn't yet have any in tree consumers.
The original code written by lstewart.
Reviewed by: rrs, emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D711
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
Fix a bug in rpcbind for multihomed hosts. If the server had interfaces on
two separate subnets, and a client on the first subnet contacted rpcbind at
the address on the second subnet, rpcbind would advertise addresses on the
first subnet. This is a bug, because it should prefer to advertise the
address where it was contacted. The requested service might be firewalled
off from the address on the first subnet, for example.
usr.sbin/rpcbind/check_bound.c
If the address on which a request was received is known, pass that
to addrmerge as the clnt_uaddr parameter. That is what addrmerge's
comment indicates the parameter is supposed to mean. The previous
behavior is that clnt_uaddr would contain the address from which the
client sent the request.
usr.sbin/rpcbind/util.c
Modify addrmerge to prefer to use an IP that is equal to clnt_uaddr,
if one is found. Refactor the relevant portion of the function for
clarity, and to reduce the number of ifdefs.
etc/mtree/BSD.tests.dist
usr.sbin/rpcbind/tests/Makefile
usr.sbin/rpcbind/tests/addrmerge_test.c
Add unit tests for usr.sbin/rpcbind/util.c:addrmerge.
usr.sbin/rpcbind/check_bound.c
usr.sbin/rpcbind/rpcbind.h
usr.sbin/rpcbind/util.c
Constify some function arguments
Reviewed by: imp
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4690
bugfix-only release, with no new features.
Please note that from 3.5.0 onwards, clang and llvm require C++11
support to build; see UPDATING for more information.
tools/regression/mac/mac_portacl into the FreeBSD test suite as
tests/sys/mac/bsdextended and tests/sys/mac/portacl, respectively
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
lib/libc/tests/nss
- Convert the testcases to ATF
- Do some style(9) cleanups:
-- Sort headers
-- Apply indentation fixes
-- Remove superfluous parentheses
- Explicitly print out debug printfs for use with `kyua {debug,report}`; for
items that were overly noisy, they've been put behind #ifdef DEBUG
conditionals
- Fix some format strings
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
tests/sys/kern/pipe
- Fix style(9) bugs
- Fix compiler warnings
- Use `nitems(x)` instead of `sizeof(x) / sizeof(*x)` pattern
The testcases will be converted over to ATF eventually, but for now will be
integrated in as plain C tests
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The :encode_tv_random_million testcase fails the epsilon tests a few thousand
times out of one million, so expect the testcase to fail
MFC after: 1 week
Submitted by: keramida
Sponsored by: EMC / Isilon Storage Division
The goal here is to make the upgrade seamless for users
Add aliases for zh_HK
Remove bad symlinks created by previous bad upgrade procedure.
Complete ObsoleteFiles.inc with more locales that have been removed
as lib/libc/rpc
This testcase requires rpcbind be up in running; otherwise the testcases
will time out and be skipped
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Extend OptionalObsoleteFiles.inc to delete all lib32 files when MK_LIB32 is
set to no on a system that previously had lib32 libraries installed.
Also, to prevent "make delete-old-dirs" from always deleting lib32 directories
after an installworld, move the lib32 subtree to its own mtree file that only
gets applied when MK_LIB32=yes.
Test: Ran "make delete-old" and "make delete-old-libs" on a system that never
had MK_LIB32 enabled, and on a system where MK_LIB32 was enabled and later
disabled. Did this both on amd64 and powerpc64.
Test: Ran "make tinderbox" without errors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3923
bin/dd/tests
Ensure fdescfs is mounted on /dev/fd/ for the length testcase as it's used
in validating the characters read from /dev/zero
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Make the requirements more complete for the testcases
- Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1)
is available, ACL support is enabled with UFS, etc).
- Work with temporary files/directories/mountpoints that work with atf/kyua
- Limit the testcases to work on temporary filesystems to reduce tainting the
test host
MFC after: 2 weeks
Reviewed by: trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D3810
test suite as tests/sys/posixshm
Some other highlights:
- Convert the testcases over to ATF
- Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
mkstemp to generate temporary paths for non-SHM_ANON shm objects.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
leap second date correct
Updates to the file can be obtained from ftp://time.nist.gov/pub/ or
ftp://tycho.usno.navy.mil/pub/ntp/.
Suggested by: dwmalone
Reviewed by: roberto, dwmalone, delphij
Approved by: roberto
MFC after: 1 week
bug of installing 'realtek' and 'intel_iwn' as files rather then as
a 'LICENSE' file in their directories.
Also add obsolete entries for the older names and names that existed in head
for a period of time.
Suggested by: jmg
X-MFC-With: r289391
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The functional_test.sh harness for each test subdir was inspired
by the version in bin/sh/tests/functional_test.sh
Some gymnastics were required to deal with implicit rules for
.c / .o -> .out as the suffix transformation rules were
incorrectly trying to create the test outputs from some of the
source files
Sponsored by: EMC / Isilon Storage Division
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
X-MFC with: r282076
MFC after: 6 days
discontinued by its initial authors. In FreeBSD the code was already
slightly edited during the pf(4) SMP project. It is about to be edited
more in the projects/ifnet. Moving out of contrib also allows to remove
several hacks to the make glue.
Reviewed by: net@
For each test category, we generate a script containing ATF test cases for
the tests under that category. Each test case simply runs dtest.pl (the
upstream test harness) with the corresponding test files. The exclude.sh
script is used to record info about tests which should be skipped or are
expected to fail; it is used to generate atf_skip and atf_expect_fail calls.
The genmakefiles.sh script can be used to regenerate the test makefiles when
new tests are brought it from upstream.
The test suite is currently not connected to the build as there is a small
number of lingering test issues which still need to be worked out. In the
meantime however, the test suite can be easily built and installed
manually from cddl/usr.sbin/dtrace/tests.
Reviewed by: ngie
Sponsored by: EMC / Isilon Storage Division
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
contains the libraries for Address Sanitizer (asan), Undefined Behavior
Sanitizer (ubsan) and Profile Guided Optimization.
ASan is a fast memory error detector. It can detect the following types
of bugs:
Out-of-bounds accesses to heap, stack and globals
Use-after-free
Use-after-return (to some extent)
Double-free, invalid free
Memory leaks (experimental)
Typical slowdown introduced by AddressSanitizer is 2x.
UBSan is a fast and compatible undefined behavior checker. It enables a
number of undefined behavior checks that have small runtime cost and no
impact on address space layout or ABI.
PLEASE NOTE: the sanitizers still have some rough edges on FreeBSD,
particularly on i386. These will hopefully be smoothed out in the
coming time.
Differential Revision: https://reviews.freebsd.org/D1505
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
MFC after: 3 days
PR: 196580
Sponsored by: Mellanox Technologies
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
lib/libthr/tests
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Original work by: pho
Sponsored by: EMC / Isilon Storage Division
500 new testcases
Various TODOs have been sprinkled around the Makefiles for items that even need
to be ported (missing features), testcases have issues with building/linking, or
issues at runtime.
A variant of this code has been tested extensively on amd64 and i386
10-STABLE/11-CURRENT for several months without issue. It builds on other
architectures, but the code will remain off until I have prove it works on
virtual hardware or real hardware on other architectures
In collaboration with: pho, Casey Peel <casey.peel@isilon.com>
Sponsored by: EMC / Isilon Storage Division
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Directories for /usr/lib{,32}/{i18n,private} were missing from the mtree
file, which caused installworld to install the files that should be in
the directory as the name of the directory.
This will prevent vim users from accidentally checking in buggy mtree files
(mixed tabs/spaces).
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
tree support includes a device tree source compiler dtc(8) which
converts .dts files into .dtb files. /boot/loader will load dtb files
from this directory by default, allowing for fewer differences between
images for different SoCs. Compiled dts files will wind up here
eventually as an alternative to embedding them into the kernel.
Document this in hier(7), as well as add missing entries for
/boot/firmware and /boot/zfs, though the latter two should only be
considered place holders if someone wants to make them better.
particularly useful for services such as "network" (netif) where each
interface can now have its own separate configuration file.
Add /etc/rc.conf.d to the mtree file so it is always present.
MFC after: 3 days
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This change consists of two merges from projects/zfsd/head along with the
addition of an ATF test case for the new functionality.
sbin/devd/tests/Makefile
sbin/devd/tests/client_test.c
Add ATF test cases for reading events from both devd socket types.
r266519:
sbin/devd/devd.8
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is retained
for backwards-compatibility with existing clients.
r269993:
sbin/devd/devd.8
Fix grammar bug.
CR: https://reviews.freebsd.org/rS266519
MFC after: 5 days
Sponsored by: Spectra Logic
Rename all of the TAP test applications from <test> to <test>_test
to match the convention described in the TestSuite wiki page
Phabric: D538
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
The change to expand_number (r204654) broke detection of too large sizes and
relative sizes ('+'/'-').
Also add some tests.
PR: 190735
Submitted by: Kirk Russell
MFC after: 1 week
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
Convert libdevctl to use devd's new SEQPACKET socket.
lib/libdevctl/consumer.cc
lib/libdevctl/event_buffer.cc
lib/libdevctl/event_buffer.h
lib/libdevctl/reader.cc
lib/libdevctl/reader.h
Read from the new /var/run/devd.seqpacket.pipe instead of
/var/run/devd.pipe. Since it preserves record boundaries,
we can eliminate all the repacketization code in
EventBuffer::ExtractEvent as well as much supporting code
from the Reader class.
lib/libdevctl/consumer.cc
Make the pipe nonblocking. Previously, we avoided blocking
by using the FIONREAD ioctl, but this is simpler.
cddl/sbin/zfsd/case_file.cc
cddl/sbin/zfsd/tests/zfsd_unittest.cc
cddl/sbin/zfsd/vdev.cc
cddl/sbin/zfsd/zfsd.cc
cddl/sbin/zfsd/zfsd.h
cddl/sbin/zfsd/zfsd_event.cc
Update zfsd according to the libdevctl changes. The only
nontrivial change is to CaseFile::DeSerialize, which
elimintes the use of IStreamReader.
cddl/sbin/zfsd/case_file.cc
For an unknown reason, sometimes the std::ios::failbit
will get set on caseStream. Instead of checking for
!eof(), check for good(). That method checks the
eofbit, errorbit, and failbit.
livdevctl cleanup (from gibbs)
lib/libdevctl/event.cc:
lib/libdevctl/event.h:
Remove the event class's name from its Builder method. It's
perfectly clear that DevfsEvent::Builder() is the DevfsEvent
class's Builder function.
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd_event.cc:
cddl/sbin/zfsd/zfsd_event.h:
Conform to new libdevct Builder naming convention.
Fix autoreplace by physical path when a hotspare is present
cddl/sbin/zfsd/case_file.cc
Fix logic error in CaseFile::Replace regarding whether the
replacement device is a spare or not.
Reviewed by: gibbs
Sponsored by: Spectra Logic
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
This first step is mostly to prevent the code from rotting even further
and to ensure these do not get wiped when fmake's code is removed from
the tree.
These tests are currently being skipped because they detect the underlying
make is not fmake and thus disable themselves -- and the reason is that
some of the tests fail, possibly due to legitimate bugs. Enabling them to
run against bmake will come separately.
Lastly, it would be ideal if these tests were fed upstream but they are
not ready for that yet. In the interim, just put them under usr.bin/bmake/
while we sort things out. The existence of a different unit-tests directory
within here makes me feel less guilty about this.
Change confirmed working with a clean amd64 build.
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
PR: bin/187551
MFC after: 3 days
Sponsored by: Spectra Logic
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
This change is a proof of concept on how to easily integrate existing
tests from the tools/regression/ hierarchy into the /usr/tests/ test
suite and on how to adapt them to the new layout for src.
To achieve these goals, this change:
- Moves tests from tools/regression/bin/<tool>/ to bin/<tool>/tests/.
- Renames the previous regress.sh files to legacy_test.sh.
- Adds Makefiles to build and install the tests and all their supporting
data files into /usr/tests/bin/.
- Plugs the legacy_test test programs into the test suite using the new
TAP backend for Kyua (appearing in 0.8) so that the code of the test
programs does not have to change.
- Registers the new directories in the BSD.test.dist mtree file.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
This change adds some sample test cases to share/examples/tests/
demonstrating the basic usage of the atf and plain interfaces.
These test programs are fully-functional and are installed as part
of the test suite, which guarantees that the sample code remains
correct. However, they currently mostly serve as a placeholder for
additional examples and may be incomplete (depending on how you
look at them). I will see what else can be useful while working on
documentation.
As a bonus, the addition of these tests exercise the *.test.mk files,
one of which (plain.test.mk) was not yet in use, and also demonstrates
that it's possible to mix different kinds of test programs into the
same test suite.
Approved by: rpaulo (mentor)
This is to ensure that test-related directories don't get needlessly
created (and later deleted) when MK_TESTS=no.
Problem found by jhb@.
Approved by: rpaulo (mentor)
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.
In particular:
- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.
Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks
libdevctl.
etc/mtree/BSD.include.dist:
Add the /usr/include/devctl directory to the base system.
lib/Makefile:
lib/libdevctl/Makefile:
Build support for the new library.
lib/libdevctl/consumer.cc:
lib/libdevctl/consumer.h:
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd.h:
New class, DevCtl::Consumer, from functionality extracted
from ZfsDaemon, which can connect to devd, parse an event
stream, and invoke event handlers.
lib/libdevctl/event.cc:
lib/libdevctl/event.h:
cddl/sbin/zfsd/dev_ctl_event.cc:
cddl/sbin/zfsd/dev_ctl_event.h:
Strip Zfsd specific event handling from Zfsd's event classes
to create DevCtl::Event, DevCtl::DevfsEvent, and
DevCtl::ZfsEvent.
lib/libdevctl/event_buffer.cc:
lib/libdevctl/event_buffer.h:
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd.h:
DevCtl::EventBuffer: buffer for incoming devctl stream used
to parse/extract individual event strings.
lib/libdevctl/event_factory.cc:
lib/libdevctl/event_factory.h:
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd.h:
DevCtl::EventFactory: Method map for converting event
strings to Devctl::Event objects.
lib/libdevctl/exception.cc:
lib/libdevctl/exception.h:
cddl/sbin/zfsd/zfsd_exception.cc:
cddl/sbin/zfsd/zfsd_exception.h:
DevCtl::Exception and DevCtl::ParseException, the exceptions
which are thrown by this library.
lib/libdevctl/guid.cc:
lib/libdevctl/guid.h:
cddl/sbin/zfsd/guid.cc:
cddl/sbin/zfsd/guid.h:
DevCtl::Guid: Helper routines for dealing with 64bit GUIDs
such as found in Zfs pools and vdevs.
lib/libdevctl/reader.cc:
lib/libdevctl/reader.h:
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd.h:
DevCtl::Reader class hierarchy. Used to direct a Consumer
to an event stream (e.g. from devd or a local/saved file).
cddl/sbin/zfsd/zfsd_event.cc:
cddl/sbin/zfsd/zfsd_event.h:
Zfsd specialization of DevCtl::Event types.
cddl/sbin/zfsd/zfsd_exception.cc:
cddl/sbin/zfsd/zfsd_exception.h:
Zfsd specific exception types, now derived from
DevCtl::Excpetion.
cddl/sbin/zfsd/Makefile:
cddl/sbin/zfsd/callout.cc:
cddl/sbin/zfsd/callout.h:
cddl/sbin/zfsd/case_file.cc:
cddl/sbin/zfsd/case_file.h:
cddl/sbin/zfsd/vdev.cc:
cddl/sbin/zfsd/vdev.h:
cddl/sbin/zfsd/vdev_iterator.cc:
cddl/sbin/zfsd/vdev_iterator.h:
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd.h:
cddl/sbin/zfsd/zfsd_event.cc:
cddl/sbin/zfsd/zfsd_event.h:
cddl/sbin/zfsd/zfsd_exception.cc:
cddl/sbin/zfsd/zfsd_exception.h:
cddl/sbin/zfsd/zfsd_main.cc:
cddl/sbin/zfsd/zpool_list.cc:
cddl/sbin/zfsd/zpool_list.h:
Miscelaneuous refactoring to support using libdevctl instead
of local implementation.
cddl/sbin/zfsd/Makefile:
cddl/sbin/zfsd/Makefile.common:
tools/regression/zfsd/Makefile:
Export common build information for zfsd and its unit tests
to a "Makefile.common".
Submitted by: gibbs
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corporation
