Ensure that we not only block on some interfaces, but also forward on
some. Without the previous commit we wound up discarding on all ports,
rather than only on the ports needed to break the loop.
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D28917
This is basically the same test as the existing STP test, but now on top
of VLAN interfaces instead of directly using the epair devices.
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D28861
Traditionally routing socket code did almost zero checks on
the input message except for the most basic size checks.
This resulted in the unclear KPI boundary for the routing system code
(`rtrequest*` and now `rib_action()`) w.r.t message validness.
Multiple potential problems and nuances exists:
* Host bits in RTAX_DST sockaddr. Existing applications do send prefixes
with hostbits uncleared. Even `route(8)` does this, as they hope the kernel
would do the job of fixing it. Code inside `rib_action()` needs to handle
it on its own (see `rt_maskedcopy()` ugly hack).
* There are multiple way of adding the host route: it can be DST without
netmask or DST with /32(/128) netmask. Also, RTF_HOST has to be set correspondingly.
Currently, these 2 options create 2 DIFFERENT routes in the kernel.
* no sockaddr length/content checking for the "secondary" fields exists: nothing
stops rtsock application to send sockaddr_in with length of 25 (instead of 16).
Kernel will accept it, install to RIB as is and propagate to all rtsock consumers,
potentially triggering bugs in their code. Same goes for sin_port, sin_zero, etc.
The goal of this change is to make rtsock verify all sockaddr and prefix consistency.
Said differently, `rib_action()` or internals should NOT require to change any of the
sockaddrs supplied by `rt_addrinfo` structure due to incorrectness.
To be more specific, this change implements the following:
* sockaddr cleanup/validation check is added immediately after getting sockaddrs from rtm.
* Per-family dst/netmask checks clears host bits in dst and zeros all dst/netmask "secondary" fields.
* The same netmask checking code converts /32(/128) netmasks to "host" route case
(NULL netmask, RTF_HOST), removing the dualism.
* Instead of allowing ANY "known" sockaddr families (0<..<AF_MAX), allow only actually
supported ones (inet, inet6, link).
* Automatically convert `sockaddr_sdl` (AF_LINK) gateways to
`sockaddr_sdl_short`.
Reported by: Guy Yur <guyyur at gmail.com>
Reviewed By: donner
Differential Revision: https://reviews.freebsd.org/D28668
MFC after: 3 days
rtinit[1]() is a function used to add or remove interface address prefix routes,
similar to ifa_maintain_loopback_route().
It was intended to be family-agnostic. There is a problem with this approach
in reality.
1) IPv6 code does not use it for the ifa routes. There is a separate layer,
nd6_prelist_(), providing interface for maintaining interface routes. Its part,
responsible for the actual route table interaction, mimics rtenty() code.
2) rtinit tries to combine multiple actions in the same function: constructing
proper route attributes and handling iterations over multiple fibs, for the
non-zero net.add_addr_allfibs use case. It notably increases the code complexity.
3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag
for p2p connections, host routes and p2p routes are handled in the same way.
Additionally, mapping IFA flags to RTF flags makes the interface pretty messy.
It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface
aliases.
4) rtinit() is the last customer passing non-masked prefixes to rib_action(),
complicating rib_action() implementation.
5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive"
ifa messages in certain corner cases.
To address all these points, the following has been done:
* rtinit() has been split into multiple functions:
- Route attribute construction were moved to the per-address-family functions,
dealing with (2), (3) and (4).
- funnction providing net.add_addr_allfibs handling and route rtsock notificaions
is the new routing table inteface.
- rtsock ifa notificaion has been moved out as well. resulting set of funcion are only
responsible for the actual route notifications.
Side effects:
* /32 alias does not result in interface routes (/32 route and "host" route)
* RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses
Differential revision: https://reviews.freebsd.org/D28186
802.1ad interfaces are created with ifconfig using the "vlanproto" parameter.
Eg., the following creates a 802.1Q VLAN (id #42) over a 802.1ad S-VLAN
(id #5) over a physical Ethernet interface (em0).
ifconfig vlan5 create vlandev em0 vlan 5 vlanproto 802.1ad up
ifconfig vlan42 create vlandev vlan5 vlan 42 inet 10.5.42.1/24
VLAN_MTU, VLAN_HWCSUM and VLAN_TSO capabilities should be properly
supported. VLAN_HWTAGGING is only partially supported, as there is
currently no IFCAP_VLAN_* denoting the possibility to set the VLAN
EtherType to anything else than 0x8100 (802.1ad uses 0x88A8).
Submitted by: Olivier Piras
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D26436
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
RTF_HOST indicates whether route is a host route
(netmask is empty or /{32,128}).
Check that if netmask is empty and host route is not specified, kernel
returns an error.
Differential Revision: https://reviews.freebsd.org/D26155
This fixes possible link errors, similar to:
ld: error: undefined symbol: iface_setup_addr
>>> referenced by test_rtsock_l3.c:111 (tests/sys/net/routing/test_rtsock_l3.c:111)
>>> test_rtsock_l3.o:(presetup_ipv4)
>>> referenced by test_rtsock_l3.c:79 (tests/sys/net/routing/test_rtsock_l3.c:79)
>>> test_rtsock_l3.o:(presetup_ipv6)
>>> referenced by test_rtsock_l3.c:512 (tests/sys/net/routing/test_rtsock_l3.c:512)
>>> test_rtsock_l3.o:(atfu_rtm_change_v4_gw_success_body)
>>> referenced 10 more times
In C (not C++), 'naked' inline is almost always a mistake. Either use
static inline (this is appropriate for most cases), or extern inline.
MFC after: 3 days
This test should no longer provoke large amounts of traffic, which can
overwhelm single-core systems, preventing them from making progress in the
tests.
The test can now be re-enabled.
PR: 246448
Enable STP before bringing the bridges up. This avoids a switching loop,
which has a tendency to drown out progress in userspace processes,
especially on single-core systems.
Only check that we have indeed shut down one of the looped interfaces
PR: 246448
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D25084
We used to have an issue with recursive locking with
net.link.bridge.inherit_mac. This causes us to send an ARP request while
we hold the BRIDGE_LOCK, which used to cause us to acquire the
BRIDGE_LOCK again. We can't re-acquire it, so this caused a panic.
Now that we no longer need to acquire the BRIDGE_LOCK for
bridge_transmit() this should no longer panic. Test this.
PR: 216510
Reviewed by: emaste, philip
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24251
We used to have a problem where bridges created in different vnet jails
would end up having the same mac address. This is now fixed by
including the jail name as a seed for the mac address generation, but we
should verify that it doesn't regress.
Many rtsock tests verify the ordering of the kernel messages for the
particular event. In order to avoid flaky tests due to the other tests
running, switch all tests to use personal vnet-enabled jails.
This removes all clashes on the IP addresses and brings back the ability
to run these tests simultaneously.
Reported by: olivier
Reviewed by: olivier
Differential Revision: https://reviews.freebsd.org/D24182
Basic test case where we create a bridge loop, verify that we really are
looping and then enable spanning tree to resolve the loop.
Reviewed by: philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23959
Very basic bridge test: Set up two jails and test that they can pass IPv4
traffic over the bridge.
Reviewed by: melifaro, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23697
kldload() returns a positive integer when it loads a ko, so check that the
return value is -1 to detect error cases, not that it's different from zero.
MFC after: 3 days
X-MFC-With: r357234
kldload() returns an error (EEXIST) if the module is already loaded.
That's not a problem for us, so ignore that error.
While here also clean up include statements.
MFC after: 3 days
X-MFC-With: r357234
if_epair abused the ifr_data field to insert its second interface in
IFC_IFLIST. If userspace provides a value for ifr_data it would get
dereferenced by the kernel leading to a panic.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
The routing subdirectory installed into the same directory as the test tests,
which caused them to overwrite the net Kyuafile. As a result these tests were
not executed.
X-MFC-With: r356146
Redirect (and temporal) route expiration was broken a while ago.
This change brings route expiration back, with unified IPv4/IPv6 handling code.
It introduces net.inet.icmp.redirtimeout sysctl, allowing to set
an expiration time for redirected routes. It defaults to 10 minutes,
analogues with net.inet6.icmp6.redirtimeout.
Implementation uses separate file, route_temporal.c, as route.c is already
bloated with tons of different functions.
Internally, expiration is implemented as an per-rnh callout scheduled when
route with non-zero rt_expire time is added or rt_expire is changed.
It does not add any overhead when no temporal routes are present.
Callout traverses entire routing tree under wlock, scheduling expired routes
for deletion and calculating the next time it needs to be run. The rationale
for such implemention is the following: typically workloads requiring large
amount of routes have redirects turned off already, while the systems with
small amount of routes will not inhibit large overhead during tree traversal.
This changes also fixes netstat -rn display of route expiration time, which
has been broken since the conversion from kread() to sysctl.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23075
Set up two jails connected by an epair. Create VLAN interfaces in both
jails and check connectivity.
This is a very basic test, but exposed panics during the network stack
epoch work, so this is worth testing.
Implements the missing test cases for epair in a similar fashion to the
existing tests. Fixes shared abstractions to work with epair tests.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D20498
There was a problem destroying renamed tun interfaces in vnet jails. This was
fixed in r344794. Test the previously failing scenario.
PR: 235704
MFC after: 2 weeks
