If not specified, network.subr will add it automatically if we have
INET support (1).
In network.subr only call the address family up/down functions
if the respective AF is available.
Switch to new kern.features variables for inet and inet6 as the
inet sysctl tree is also available for IPv6-only kernels leading
to unexpected results.
Suggested by: hrs (1)
Reviewed by: hrs
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 20 days
As noted in Austin Group issue #370 (an interpretation has been issued),
failing posix_spawn() because an fd specified with
posix_spawn_file_actions_addclose() is not open is unnecessarily harsh, and
there are existing implementations that do not fail posix_spawn() for this
reason.
Reviewed by: ed
MFC after: 10 days
queues. Try to have a set of these per port when possible, fall back
to sharing a common pool between all ports otherwise.
- One control queue per port (used to be one per hardware channel).
- t4_eth_rx now handles Ethernet rx only.
- sysctls to display pidx/cidx for some queues.
MFC after: 1 week
filters working. (All other filters - switch without L2 info rewrite,
steer, and drop - were already fully-functional).
Some contrived examples of "switch" filters with L2 rewriting:
# cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3
Intercept all packets received on physical port 0 with TCP port 80 as
destination, insert a vlan tag with VID 9, and send them out of port 3.
# cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \
vlan =9 smac aa:bb:cc:dd:ee:ff eport 0
Intercept all packets (received on any port) with source IP address
192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac
to aa:bb:cc:dd:ee:ff, and send it out of port 0.
MFC after: 1 week
hardware supports it.
Since ni->ni_htcap in hostap mode is what the remote end has advertised,
not what has been negotiated/decided, we need to check ourselves what
the current channel width is and what the hardware supports before
enabling short-GI.
It's important that short-GI isn't enabled when it isn't negotiated
and when the hardware doesn't support it (ie, short-gi for 20mhz channels
on any chip < AR9287.)
I've quickly verified this on the AR9285 in 11n mode.
- The existing ipi_lock continues to protect the global inpcb list and
inpcb counter. This lock is now relegated to a small number of
allocation and free operations, and occasional operations that walk
all connections (including, awkwardly, certain UDP multicast receive
operations -- something to revisit).
- A new ipi_hash_lock protects the two inpcbinfo hash tables for
looking up connections and bound sockets, manipulated using new
INP_HASH_*() macros. This lock, combined with inpcb locks, protects
the 4-tuple address space.
Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb
connection locks, so may be acquired while manipulating a connection on
which a lock is already held, avoiding the need to acquire the inpcbinfo
lock preemptively when a binding change might later be required. As a
result, however, lookup operations necessarily go through a reference
acquire while holding the lookup lock, later acquiring an inpcb lock --
if required.
A new function in_pcblookup() looks up connections, and accepts flags
indicating how to return the inpcb. Due to lock order changes, callers
no longer need acquire locks before performing a lookup: the lookup
routine will acquire the ipi_hash_lock as needed. In the future, it will
also be able to use alternative lookup and locking strategies
transparently to callers, such as pcbgroup lookup. New lookup flags are,
supplementing the existing INPLOOKUP_WILDCARD flag:
INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb
INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb
Callers must pass exactly one of these flags (for the time being).
Some notes:
- All protocols are updated to work within the new regime; especially,
TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely
eliminated, and global hash lock hold times are dramatically reduced
compared to previous locking.
- The TCP syncache still relies on the pcbinfo lock, something that we
may want to revisit.
- Support for reverting to the FreeBSD 7.x locking strategy in TCP input
is no longer available -- hash lookup locks are now held only very
briefly during inpcb lookup, rather than for potentially extended
periods. However, the pcbinfo ipi_lock will still be acquired if a
connection state might change such that a connection is added or
removed.
- Raw IP sockets continue to use the pcbinfo ipi_lock for protection,
due to maintaining their own hash tables.
- The interface in6_pcblookup_hash_locked() is maintained, which allows
callers to acquire hash locks and perform one or more lookups atomically
with 4-tuple allocation: this is required only for TCPv6, as there is no
in6_pcbconnect_setup(), which there should be.
- UDPv6 locking remains significantly more conservative than UDPv4
locking, which relates to source address selection. This needs
attention, as it likely significantly reduces parallelism in this code
for multithreaded socket use (such as in BIND).
- In the UDPv4 and UDPv6 multicast cases, we need to revisit locking
somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which
is no longer sufficient. A second check once the inpcb lock is held
should do the trick, keeping the general case from requiring the inpcb
lock for every inpcb visited.
- This work reminds us that we need to revisit locking of the v4/v6 flags,
which may be accessed lock-free both before and after this change.
- Right now, a single lock name is used for the pcbhash lock -- this is
undesirable, and probably another argument is required to take care of
this (or a char array name field in the pcbinfo?).
This is not an MFC candidate for 8.x due to its impact on lookup and
locking semantics. It's possible some of these issues could be worked
around with compatibility wrappers, if necessary.
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
rather than using a fixed port number. This means that the regression test
can be run many times in a row without waiting on TIMEWAIT to release a
hard-coded port number.
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
1. Both mmc_read_ivar() and sdhci_read_ivar() use the expression
'*(int *)result = val' to assign to result which is uintptr_t *.
This does not work on big-endian 64 bit systems.
2. The media_size ivar is declared as 'off_t' which does not fit
into uintptr_t in 32bit systems, change this to long.
Submitted by: kanthms at netlogicmicro com (initial version)
- netconfig - what auto will call which in turn will check for
IPv4 and IPv6 to be available and ask the user to configure it
by calling
- netconfig_ipv4 doing DHCP and static IPv4 addresses, and
- netconfig_ipv6 doing rtsol and static IPv6 addresses,
and then checking, querying and updating resolv.conf upon return.
Both DHCP and rtsol (in the future) might update resolv.conf already so
we seed ourselves from that file if available.
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
a sync(2) syscall before unmount(2) for the "-f" case.
This avoids a forced dismount from getting stuck for
an NFS mountpoint in sync() when the server is not
responsive. With this commit, forced dismounts should
normally work for the NFS clients, but can take up to
about 1minute to complete.
PR: kern/157365
Reviewed by: kib
MFC after: 2 weeks
provoke errors trying to query options not available.
Make it possible to compile out INET or INET6 only parts.
Reviewed by: jamie
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 10 days
in the old NFS client so that a forced dismount doesn't
get stuck in the VFS_SYNC() call that happens before
VFS_UNMOUNT() in dounmount(). Analagous to r222329 for the new NFS client.
An additional change is needed before forced dismounts will work.
PR: kern/157365
MFC after: 2 weeks
Kelvin temperature, which is impossible except for some contrived magnetic
spin systems), use the previous measurement from that sensor instead of
corrupting everything and randomly changing the fans or shutting off the
machine.
larger than the receive buffer, we have to receive in sections.
When notifying the protocol that some data has been drained the
lock is released for a moment. Returning we block waiting for the
rest of data. There is a race, when data could arrive while the
lock was released and then the connection stalls in sbwait.
Fix this by checking for data before blocking and skip blocking
if there are some.
PR: kern/154504
Reported by: Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua>
Tested by: Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua>
Reviewed by: rwatson
Approved by: kib (co-mentor)
MFC after: 2 weeks
controllers because of TX MAC hangs when trying to send a frame
that is larger than 4K (see r200759).
PR: docs/156742
Submitted by: Michael Moll (kvedulv at kvedulv dot de)
Reviewed by: yongari@
MFC after: 6 days
system and is decided upon by configure and could be an u_int or a
u_char. For FreeBSD it is a u_char.
For IPv6 however RFC 3493, 5.2 defines the argument to
IPV6_MULTICAST_LOOP to be an unsigned integer so make sure we always
use that using a second variable for the IPV6 case.
This is to get rid of these error messages every 5 minutes on some
systems:
ntpd[1530]: setsockopt IPV6_MULTICAST_LOOP failure: Invalid argument
on socket 22, addr fe80::... for multicast address ff02::101
While here also fix the copy&paste error in the log message for
IPV6_MULTICAST_LOOP.
Reviewed by: roberto
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 10 days
Filed as: Bug 1936 on ntp.org
address so that proper clean up will take place in the routing code.
This patch fixes the bootp panic on startup problem. Also, added more
error handling and logging code in function in_scrubprefix().
MFC after: 5 days
o In bare_probe(), change the logic that determines the maximum
number of processors/cores into a switch statement and take
advantage of the fact that bit 3 of the SVR value indicates
whether we're running on a security enabled version. Since we
don't care about that here, mask the bit. All -E versions
are taken care of automatically.
This has been disabled until now because there hasn't been any supported
device which has this feature. Since the AR9287 is the first device to
support it, and since now the HAL has functional AR9287+11n support,
flip this on.
