Commit Graph

1526 Commits

Author SHA1 Message Date
ru
985e35fdba Add missing mtx_destroy() when if_alloc() fails.
Add missing if_free() when mii_phy_probe() fails.
Put if_free() into the correct #ifdef in detach().
2005-09-16 09:20:58 +00:00
ru
ec39fdd014 Add missing if_free() in rue_detach(). 2005-09-16 09:16:46 +00:00
obrien
4bbda4e49b Note that Keyspan is also InnoSys Inc. 2005-09-12 03:32:46 +00:00
iedowse
41ee608d23 Provide the USB device release number along with other parameters
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.

Submitted by:	Anish Mistry
2005-08-23 21:32:49 +00:00
damien
ba9d3582e3 Fix basic rates set for 802.11a/g operating modes. This can significantly
improve transfer rates in 802.11a/g.  Fix IFS settings in ral(4) too.

MFC after:	6 days
2005-08-21 14:16:20 +00:00
damien
c615f26ea8 Don't automatically start scanning in if_init() if IEEE80211_ROAMING_MANUAL
flag is set.

MFC after:	1 week
2005-08-20 14:28:37 +00:00
sam
7d1366bf6d Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
  channel instead of overloading ic->ic_bss->ni_chan (or in some
  drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
  state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
  more like a scan cache--look for an existing entry before adding
  a new one; this combined with ic_curchan use corrects handling of
  stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
  a new ieee80211_add_neighbor routine

Reviewed by:	avatar
Tested by:	avatar, Michal Mertl
MFC after:	2 weeks
2005-08-10 16:22:30 +00:00
obrien
3700770733 Add proper copyright attribution. 2005-08-10 03:54:37 +00:00
rwatson
5d770a09e8 Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
iedowse
b7a6c274ca Fix two bugs that interacted to cause page faults in softclock()
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.

Reported by:	flz
MFC after:	3 days
2005-08-04 02:21:37 +00:00
rwatson
9918d13b80 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
sam
3876d0ac68 diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 16:50:18 +00:00
delphij
a7fbd037f4 PLAY_MSF, PLAY_TRACK, PLAY_TRACK_REL, PAUSE, PLAY_12 commands to pass
through umass(4), in order to make cdcontrol(1) to issue commands to
a USB CD driver.

The command IDs were obtained from the CAM subsystem.  This was tested
on half dozen of USB CD drivers from different vendors.

Suggested by:	"intron" <intron at intron dot ac>
PR:		usb/83439
Reviewed by:	sanpei
MFC After:	1 week
2005-07-19 05:18:23 +00:00
imp
1fb171848d Don't wait for the printer to become ready before allowing the open to
succeed.  There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically.  Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way...  If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).

In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'.  This
fixes the EBUSY on open timeouts on those printer as well.

Reviewed by: the defining silence on usb@
2005-07-15 04:19:42 +00:00
takawata
07353f37ea Add SL811 based host controller driver for CF usb host controller.
This is based on NetBSD slhci(4) driver for X68k amateur hardware.
For now, it will not work properly, but it can detect usb device
insertion.
2005-07-14 15:57:01 +00:00
takawata
1bcb19fb2f Prepare to commit SL811 based Host controller driver. 2005-07-14 14:19:05 +00:00
sam
0cf4212697 remove driver-private key allocators; use the default one instead
so wpa keys are handled properly

Reviewed by:	avatar
Approved by:	re (scottl)
2005-07-10 00:17:05 +00:00
damien
4e6c852a12 Make sure that all the necessary USB endpoints are found during device
attachment.

Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-08 19:19:06 +00:00
damien
9530c73e6c ral_init() takes a struct ral_softc as parameter not a struct ifnet.
Fixes a panic that occured when setting the interface parameters while
the interface was associated.

Approved by:	re (scottl)
2005-07-08 19:13:49 +00:00
sam
0cb3988821 reclaim node reference when ieee80211_encap fails
Reviewed by:	avatar
Approved by:	re (scottl)
2005-07-08 16:31:19 +00:00
sam
d5bd29fcc2 update ural ids
Reviewed by:	damien
Approved by:	re (scottl)
Obtained from:	openbsd
2005-07-08 16:28:24 +00:00
sam
ee0f352bd1 reclaim mbuf when ieee80211_crypto_encap fails
Approved by:	re (scottl)
Obtained from:	netbsd
2005-07-07 02:55:04 +00:00
hrs
2157a5b85a Add support for IODATA USB-RSAQ3 USB-Serial Adapter.
Reported by:	Tomokazu Hirai
Approved by:	re (scottl)
MFC after:	3 days
2005-07-03 23:51:16 +00:00
damien
0f0e5d42a8 o Add new ids for the Belkin F5D7050
o Indent usb ids properly
o Check the return value of if_alloc()
o Call if_free() in ural_detach()

Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-03 15:38:41 +00:00
damien
7542bb5c0f Add another ural(4) device (Belkin F5D7050)
Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-03 15:34:32 +00:00
brooks
567ba9b00a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
benno
4d7c4e1ac1 Identify the Intel ICH4 EHCI controller. 2005-06-10 08:28:22 +00:00
imp
a0b037e618 Power state management now done in PCI bus code 2005-06-05 22:53:09 +00:00
nyan
0fce92f5c4 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
damien
c9d4996e8f Fix WPA (802.11i) support.
Approved by:	silby (mentor)
2005-05-22 18:34:20 +00:00
marius
2ef561e542 Recognize the integrated USB controllers of Sun PCIO-2 chips which
are used onboard in most of the newer PCI-based sun4u machines
(cosmetic change as they were also already probed as generic OHCI
without this). Detect whether their intpin register is valid and
correct it if necessary, i.e. set the respective IVAR to the right
value for allocating the IRQ resource, as some of them come up
having it set to 0 (mainly those used in Blade 100 and the first
one on AX1105 boards). This fixes attaching affected controllers.
Correcting the intpin value might be better off in the PCI code
via a quirk table but on the other hand gem(4) and hem(4) also
correct it themselves and at least for the USB controller part
the intpin register is truely hardwired to 0 and can't be changed.
This means that we would have to hook up the quirk information
in a lot of places in the PCI code (i.e. whenever the value of the
intpin register is read from or written to the pci_devinfo of the
respective device) in order to do it the right way.

MFC after:	1 month
2005-05-19 23:00:46 +00:00
imp
c2bb227a08 Add convenience functions to get port and interface. 2005-05-16 06:58:43 +00:00
kan
7faf2ba388 Plug a potential memory leak.
Noticed by: Coverity Prevent analysis tool.
2005-05-11 18:53:14 +00:00
imp
107f3a74d1 Take out Giant in uhub_child_* in giant. There's one place where we
could sleep which I think can lead to races.  However, there are fewer
with this code than without it.

Submitted by: Hans Petter Selasky
2005-05-11 15:21:22 +00:00
julian
a3f4657e28 A patch to support Palm Tungsten T via USB-Cradle.
not suer where it comes from but suspect kimoto at ohnolab.org

MFC after:	1 week
2005-05-04 00:46:24 +00:00
damien
8e5cb227ae Initial import of ipw, iwi, ral and ural drivers:
ipw  - Intel PRO/Wireless 2100
iwi  - Intel PRO/Wireless 2200BG/2225BG/2915ABG
ral  - Ralink Technology RT2500
ural - Ralink Technology RT2500USB

Approved by:	silby (mentor)
2005-04-18 18:47:38 +00:00
iedowse
e1d3e5ff38 Fix the handling of the UCS_RXSTOP flag so that it always tracks
whether or not the receive pipe is stopped. This ensures that we
do not attempt to start the same transfer twice, and it allows
ucomstop() to skip the restarting of the read pipe if it was not
originally running, such as when called indirectly from ucomreadcb().

PR:		kern/79420
MFC after:	1 day
2005-04-12 00:26:40 +00:00
le
ab10e54fee Add support for Sitecom USB to serial cable (v2)
PR:            usb/79230
Submitted by:  Rick van der Zwet <rick@wzoeterwoude.net>
2005-04-08 12:48:05 +00:00
ticso
c6535773a6 Add support for FTDI's FT2232C twin channel chip.
Tested by: Mike Tancsa <mike@sentex.net>
2005-04-05 22:09:18 +00:00
ticso
3acd78dbf7 remove usbd_errstr(err) from printf.
err has nothing to say about this specific error.
2005-04-05 22:03:07 +00:00
iedowse
6b247959f9 Use the usb_callout_* API instead of timeout()/untimeout() in order
to avoid a race condition that can cause the ukbd timeout routine
to run after the keyboard has detached.

Reported and tested by:	wpaul
2005-03-30 08:32:41 +00:00
iedowse
f954f61ba1 Don't defer the boot-time exploration of high-speed USB busses.
This ensures that we explore EHCI busses before their companion
controllers' busses, so that ports connected to full/low speed
devices will be properly routed to the companion controllers by the
time the OHCI/UHCI exploration occurs.
2005-03-27 15:31:23 +00:00
sobomax
012bf80ac9 Comment out rue_miibus_statchg() function. Using trial-and-error approach I
found it guilty in putting the card into unusable state after UP->DOWN->UP
media status change.

Looks like some of register writes in this functions mess up PHY interface.

No visible regressions has been found after commenting this code out -
the card properly handles forceful local mode changes and auto-detects changes
made remotely (tested with Auto, 10HD, 10FD, 100HD, 100FD).

Sponsored by:	PBXpress Inc.
MFC after:	3 days
2005-03-25 20:19:18 +00:00
sobomax
06e202e4aa Add /* _FOO_H_ */ after the final #endif to make danfe happy. 2005-03-25 13:22:58 +00:00
sobomax
3b7d62ce51 Fix identation. 2005-03-25 12:55:06 +00:00
sobomax
33d18fcacb Add missed KUE_UNLOCK(). This is NOOP yet, but may be handy later on. 2005-03-25 12:53:26 +00:00
sobomax
c30f56d563 Fix breakage in the previous commit caused by the last-minute change. 2005-03-25 12:50:57 +00:00
sobomax
b1082b66dd Protect against multiple inclusions. 2005-03-25 12:49:26 +00:00
sobomax
9289f3e0c2 Move Rx/Tx lists management routines into central location. 2005-03-25 12:42:30 +00:00
sobomax
87c37fafc7 GC unused fields. 2005-03-25 10:39:23 +00:00