from enc_hhook().
This should solve the problem when pf is used with if_enc(4) interface,
and outbound packet with existing PCB checked by pf, and this leads to
deadlock due to pf does its own PCB lookup and tries to take rlock when
wlock is already held.
Now we pass PCB pointer if it is known to the pfil hook, this helps to
avoid extra PCB lookup and thus rlock acquiring is not needed.
For inbound packets it is safe to pass NULL, because we do not held any
PCB locks yet.
PR: 220217
MFC after: 3 weeks
Sponsored by: Yandex LLC
request that their clock_settime() methods be called at a given offset
from top-of-second. This adds a timeout_task to the rtc_instance so that
each clock can be separately added to taskqueue_thread with the scheduling
it prefers, instead of looping through all the clocks at once with a
single task on taskqueue_thread. If a driver doesn't call clock_schedule()
the default is the old behavior: clock_settime() is queued immediately.
The motivation behind this is that I was on the path of adding identical
code to a third RTC driver to figure out a delta to top-of-second and
sleep for that amount of time because writing the the RTC registers resets
the hardware's concept of top-of-second. (Sometimes it's not top-of-second,
some RTC clocks tick over a half second after you set their time registers.)
Worst-case would be to sleep for almost a full second, which is a rude thing
to do on a shared task queue thread.
over the scheduling precision than 'ticks' can offer, and because sometimes
you're already working with sbintime_t units and it's dumb to convert them
to ticks just so they can get converted back to sbintime_t under the hood.
Since device can pass multiple frames in a single payload temporary
Rx buffer was big enough to hold all of them; now the driver can
concatenate a single frame from multiple payloads.
The Rx buffer size may be configured via tunable (dev.rtwn.%d.rx_buf_size).
Tested with:
- rtl8188cus, rtl8188eu and rtl8821au (STA mode).
- (by kevlo) rtl8192cu and rtl8188eu.
PR: 218527
Reviewed by: kevlo
Differential Revision: https://reviews.freebsd.org/D11705
the informational print functions. Collapse the debug API a bit to be
more generic and not require as much code duplication. While here, fix
a bug in MPS that was already fixed in MPR.
between 12/24 hour mode. Also fix conversion between 12 and 24 hour mode.
It's not as easy as adding/subtracting 12, because the clock doesn't roll
over 11->0, it rolls over 12->1; 0 isn't a valid hour in AM/PM mode.
Don't enable the oscillator when it is found to be stopped at init time,
just let the first setting of valid time start it. But still report a dead
battery if it's stopped at init time.
Don't force the chip into 24hr mode, just cope with whatever mode it is
already in.
Align the RTC clock to top of second when setting it.
Resource allocation for parent device does not look good by itself, but
attempt to allocate them for unrelated device just does not end up good.
On Asus X99-E WS/USB3.1 system reporting ISA bridge via both PCI and ACPI
this reported to cause kernel panic on shutdown due to messed resources:
https://bugs.freenas.org/issues/25237.
MFC after: 1 week
Do the allocation before requesting the IOCFacts message. This triggers
the LSI firmware to recognize the multiqueue should be enabled if available.
Multiqueue isn't used by the driver yet, but this also fixes a problem with
the cached IOCFacts not matching latter checks, leading to potential problems
with error recovery.
As a side-effect, fetch the driver tunables as early as possible.
Reviewed by: slm
Obtained from: Netflix
Differential Revision: D9243
all the chips in the NXP PCA212x and PCA/PCF85xx series. In addition to
supporting more chips, this driver uses the countdown timer on the chips as
a fractional seconds counter, giving it a resolution of about 15 milliseconds.
No functional change.
This is handy for FreeBSD derivatives that want to modify the value of
MAXPATHLEN, but not the kld_file_stat ABI.
Submitted by: Siddhant Agarwal <sagarwal AT isilon.com>
Sponsored by: Dell EMC Isilon
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
Use them in some existing code that is vulnerable to roundoff errors.
The existing constant SBT_1NS is a honeypot, luring unsuspecting folks into
writing code such as long_timeout_ns*SBT_1NS to generate the argument for a
sleep call. The actual value of 1ns in sbt units is ~4.3, leading to a
large roundoff error giving a shorter sleep than expected when multiplying
by the trucated value of 4 in SBT_1NS. (The evil honeypot aspect becomes
clear after you waste a whole day figuring out why your sleeps return early.)
Currently in Virtio driver without TSO/GSO features enabled, the max scatter
gather segments for the TX path can be 4, which limits the support for 9K JUMBO
frames. 9K JUMBO frames results in more than 4 scatter gather segments and
virtio driver fails to send the frame down to host OS. With TSO/GSO feature
enabled max scatter gather segments can be 64, then 9K JUMBO frames are fine,
this is making virtio driver to support JUMBO frames only with TSO/GSO.
Increasing the VTNET_MIN_TX_SEGS which is the case for non TSO/GSO to 32 to
support upto 64K JUMBO frames to Host.
Submitted by: Lohith Bellad <lohithbsd@gmail.com>
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8803
If the nfsrpc_createlayoutrpc() call in nfsrpc_getcreatelayout() fails,
the code used nfhpp when it might be set NULL. This patch checks for
the error cases (laystat != 0) and avoids using nfhpp for the failure case.
This would only affect NFSv4.1 mounts with the "pnfs" option.
Found while testing the "umount -N" patch not yet in head.
MFC after: 2 weeks
pmap_remap_vm_attr() function requires indexes to
pte2_attr_tab as the arguments (VM_MEMATTR_).
Mistakenly, instead of them, actual values from the
table were used (PTE2_ATTR_), when applying
work-around for Marvell Armada 38x SoCs.
Submitted by: Marcin Wojtas (mw@semihalf.com)
Reported by: Rafal Kozik (rk@semihalf.com)
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11704
The ksyms(4) device was added specifically for use by lockstat(1), which
as a DTrace consumer must run as root.
Discussed with: emaste
MFC after: 3 days
The TEX index is selected using (TEX0 C B) bits
from the L2 descriptor. Use correct index by masking
and shifting those bits accordingly.
Differential Revision: https://reviews.freebsd.org/D11703
queue lock when the uppoer stack is called inside TCP_LRO
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: erj
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11724
were redundant and not being used to set anything up.
Submitted by: Matt Macy <mmacy@mattmacy.io>
Reported by: Jeb Cramer <cramerj@intel.com>
Sponsored by: Limelight Networks
This patch defines a macro that checks for MNTK_UNMOUNTF and replaces
explicit checks with this macro. It has no effect on semantics, but
prepares the code for a future patch where there will also be a
NFS specific flag for "forced dismount about to occur".
Suggested by: kib
MFC after: 2 weeks
New kern.lognosys values are
1 - log to ctty
2 - log to console
3 - log to both.
Inspired by: eugen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
