an NFS node including the access and attribute caches. Previously the NFS
client only purged any name cache entries associated with the file.
PR: kern/123755
Submitted by: Jaakko Heinonen jh of saunalahti fi
Reported by: Timo Sirainen tss of iki fi
Reviewed by: rwatson, rmacklem
MFC after: 1 month
- Trace non-error loads into the access cache once, not zero times or
twice.
- Sometimes attr cache loads fail due to a race, in which case they are
aborted leading to an invalidation; in this case, trace only the flush,
not a load.
MFC after: 1 month
Sponsored by: Google, Inc.
events are:
nfsclient:accesscache:flush:done
nfsclient:accesscache:get:hit
nfsclient:accesscache:get:miss
nfsclient:accesscache:load:done
They pass the vnode, uid, and requested or loaded access mode (if any);
the load event may also report a load error if the RPC fails.
The attribute cache events are:
nfsclient:attrcache:flush:done
nfsclient:attrcache:get:hit
nfsclient:attrcache:get:miss
nfsclient:attrcache:load:done
They pass the vnode, optionally the vattr if one is present (hit or load),
and in the case of a load event, also a possible RPC error.
MFC after: 1 month
Sponsored by: Google, Inc.
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.
Reviewed by: arch
There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
BO_LOCK/UNLOCK/MTX when manipulating the bufobj.
- Create a new lock in the bufobj to lock bufobj fields independently.
This leaves the vnode interlock as an 'identity' lock while the bufobj
is an io lock. The bufobj lock is ordered before the vnode interlock
and also before the mnt ilock.
- Exploit this new lock order to simplify softdep_check_suspend().
- A few sync related functions are marked with a new XXX to note that
we may not properly interlock against a non-zero bv_cnt when
attempting to sync all vnodes on a mountlist. I do not believe this
race is important. If I'm wrong this will make these locations easier
to find.
Reviewed by: kib (earlier diff)
Tested by: kris, pho (earlier diff)
always curthread.
As KPI gets broken by this patch, manpages and __FreeBSD_version will be
updated by further commits.
Tested by: Andrea Barberio <insomniac at slackware dot it>
nfs_xid_gen() function instead of duplicating the logic in both
nfsm_rpchead() and the NFS3ERR_JUKEBOX handling in nfs_request().
MFC after: 1 week
Submitted by: mohans (a long while ago)
owned by a NULL owner. This will lead consequent VOP_ISLOCKED() present
into nfs_upgrade_vnlock() to panic as it only acquire curthread now.
Fix nfs_upgrade_vnlock() and nfs_downgrade_vnlock() in order to not use
more the struct thread pointer passed as argument (as it is really nomore
required there as vn_lock() and VOP_UNLOCK doesn't get the lock more).
Using curthread, in place, doesn't get ambiguity as LK_EXCLOTHER should
be handled as a "not locked" request by both functions.
Reported by: kris
Tested by: kris
Reviewed by: ups
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
- Eliminate the hideous nfs_sndlock that serialized NFS/TCP request senders
thru the sndlock.
- Institute a new nfs_connectlock that serializes NFS/TCP reconnects. Add
logic to wait for pending request senders to finish sending before
reconnecting. Dial down the sb_timeo for NFS/TCP sockets to 1 sec.
- Break out the nfs xid manipulation under a new nfs xid lock, rather than
over loading the nfs request lock for this purpose.
- Fix some of the locking in nfs_request.
Many thanks to Kris Kennaway for his help with this and for initiating the
MP scaling analysis and work. Kris also tested this patch thorougly.
Approved by: re@ (Ken Smith)
nfsnode could lead to attrs being stale. One example (that we
ran into) was a READDIR+, WRITE. The responses came back in
order, but the attrs from the WRITE were loaded before the
attrs from the READDIR+, leading to the wrong size from being
read on the next stat() call.
MFC after: 1 week
Submitted by: mohans
Approved by: re (kensmith)
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
adds a FS type specific flag indicating that the FS supports shared
vnode lock lookups, adds some logic in vfs_lookup.c to test this flag
and set lock flags appropriately.
- amd on 6.x is a non-starter (without this change). Using amd under
heavy load results in a deadlock (with cascading vnode locks all the
way to the root) very quickly.
- This change should also fix the more general problem of cascading
vnode deadlocks when an NFS server goes down.
Ideally, we wouldn't need these changes, as enabling shared vnode lock
lookups globally would work. Unfortunately, UFS, for example isn't
ready for shared vnode lock lookups, crashing pretty quickly.
This change is the result of discussions with Stephan Uphoff (ups@).
Reviewed by: ups@
upcalls which do RPC header parsing and match up the reply with the
request. NFS calls now sleep on the nfsreq structure. This enables
us to eliminate the NFS recvlock.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
- Change the cached mtime to a 'struct timespec' from a
time_t. Improving the precision of the cached mtime tightens up
NFS' "close-to-open" consistency considerably.
- Always force an over-the-wire consistency check from nfs_open()
(unless the file is marked modified). This further improves
NFS' "close-to-open" consistency.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
socket callbacks or similar callers, from both the NFS client and the
server.
Instituted nfsm_dissect_nonblock(), nfsm_dissect_xx_nonblock(). And
nfsm_disct() now takes an extra M_TRYWAIT/M_DONTWAIT argument.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
userland and a dedicated system call to get replies.
The vnode-bypass of fifos broke this into a panic.
Ditch all the magic and create a device /dev/nfslock instead, and
use that for both directions apart from the shorter path, this is
also faster because the device driver runs Giant free using the
vnode bypass.
Noticed by: marcel
initializations but we did have lofty goals and big ideals.
Adjust to more contemporary circumstances and gain type checking.
Replace the entire vop_t frobbing thing with properly typed
structures. The only casualty is that we can not add a new
VOP_ method with a loadable module. History has not given
us reason to belive this would ever be feasible in the the
first place.
Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc.
Give coda correct prototypes and function definitions for
all vop_()s.
Generate a bit more data from the vnode_if.src file: a
struct vop_vector and protype typedefs for all vop methods.
Add a new vop_bypass() and make vop_default be a pointer
to another struct vop_vector.
Remove a lot of vfs_init since vop_vector is ready to use
from the compiler.
Cast various vop_mumble() to void * with uppercase name,
for instance VOP_PANIC, VOP_NULL etc.
Implement VCALL() by making vdesc_offset the offsetof() the
relevant function pointer in vop_vector. This is disgusting
but since the code is generated by a script comparatively
safe. The alternative for nullfs etc. would be much worse.
Fix up all vnode method vectors to remove casts so they
become typesafe. (The bulk of this is generated by scripts)
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write
count on a bufobj. Bufobj_wdrop() replaces vwakeup().
Use these functions all relevant places except in ffs_softdep.c where
the use if interlocked_sleep() makes this impossible.
Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
our cached 'next vnode' being removed from this mountpoint. If we
find that it was recycled, we restart our traversal from the start
of the list.
Code to do that is in all local disk filesystems (and a few other
places) and looks roughly like this:
MNT_ILOCK(mp);
loop:
for (vp = TAILQ_FIRST(&mp...);
(vp = nvp) != NULL;
nvp = TAILQ_NEXT(vp,...)) {
if (vp->v_mount != mp)
goto loop;
MNT_IUNLOCK(mp);
...
MNT_ILOCK(mp);
}
MNT_IUNLOCK(mp);
The code which takes vnodes off a mountpoint looks like this:
MNT_ILOCK(vp->v_mount);
...
TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
...
MNT_IUNLOCK(vp->v_mount);
...
vp->v_mount = something;
(Take a moment and try to spot the locking error before you read on.)
On a SMP system, one CPU could have removed nvp from our mountlist
but not yet gotten to assign a new value to vp->v_mount while another
CPU simultaneously get to the top of the traversal loop where it
finds that (vp->v_mount != mp) is not true despite the fact that
the vnode has indeed been removed from our mountpoint.
Fix:
Introduce the macro MNT_VNODE_FOREACH() to traverse the list of
vnodes on a mountpoint while taking into account that vnodes may
be removed from the list as we go. This saves approx 65 lines of
duplicated code.
Split the insmntque() which potentially moves a vnode from one mount
point to another into delmntque() and insmntque() which does just
what the names say.
Fix delmntque() to set vp->v_mount to NULL while holding the
mountpoint lock.
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
This avoids presenting invalid data to the client's applications
when the file is modified, and then extended within the window of
the resolution of the modifcation timestamp.
Reviewed By: iedowse
PR: kern/64091
This includes a modified form of some code from Thomas Moestl (tmm@)
to properly clean up the UMA zone and the "nfsnodehashtbl" hash
table.
Reviewed By: iedowse
PR: 16299
and the nfs3 client. Also fix some bugs that happen to be causing crashes
in both v3 and v4 introduced by the v4 import.
Submitted by: Jim Rees <rees@umich.edu>
Approved by: re
Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to
operate on this mutex transparently.
Eventually new mutex will be protecting more fields in
struct mount, not only vnode list.
Discussed with: jeff
