warnings for some kernel events, mostly intended for the use of
obsoleted or otherwise undersired interfaces.
This is an abstracted and race-expelled code from compat pty driver.
Requested and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7270
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.
This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.
libsbuf/Makefile:
Add subr_prf.c for the new sbuf_hexdump() function. This
function is essentially the same function.
libsbuf/Symbol.map:
Add a new shared library minor version, and include the
sbuf_hexdump() function.
libsbuf/Version.def:
Add version 1.4 of the libsbuf library.
libutil/hexdump.3:
Document sbuf_hexdump() alongside hexdump(3), since it is
essentially the same function.
camcontrol/Makefile:
Add attrib.c.
camcontrol/attrib.c:
Implementation of READ ATTRIBUTE support for camcontrol(8).
camcontrol/camcontrol.8:
Document the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.c:
Add the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.h:
Add a function prototype for scsiattrib().
share/man/man9/sbuf.9:
Document the existence of sbuf_hexdump() and point users to
the hexdump(3) man page for more details.
sys/cam/scsi/scsi_all.c:
Add a table of known attributes, text descriptions and
handler functions.
Add a new scsi_attrib_sbuf() function along with a number
of other related functions that help decode attributes.
scsi_attrib_ascii_sbuf() decodes ASCII format attributes.
scsi_attrib_int_sbuf() decodes binary format attributes, and
will pass them off to scsi_attrib_hexdump_sbuf() if they're
bigger than 8 bytes.
scsi_attrib_vendser_sbuf() decodes the vendor and drive
serial number attribute.
scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
Information attribute that LTFS writes out.
sys/cam/scsi/scsi_all.h:
Add a number of attribute-related structure definitions and
other defines.
Add function prototypes for all of the functions added in
scsi_all.c.
sys/kern/subr_prf.c:
Add a new function, sbuf_hexdump(). This is the same as
the existing hexdump(9) function, except that it puts the
result in an sbuf.
This also changes subr_prf.c so that it can be compiled in
userland for includsion in libsbuf.
We should work to change this so that the kernel hexdump
implementation is a wrapper around sbuf_hexdump() with a
statically allocated sbuf with a drain. That will require
a drain function that goes to the kernel printf() buffer
that can take a non-NUL terminated string as input.
That is because an sbuf isn't NUL-terminated until it is
finished, and we don't want to finish it while we're still
using it.
We should also work to consolidate the userland hexdump and
kernel hexdump implemenatations, which are currently
separate. This would also mean making applications that
currently link in libutil link in libsbuf.
sys/sys/sbuf.h:
Add the prototype for sbuf_hexdump(), and add another copy
of the hexdump flag values if they aren't already defined.
Ideally the flags should be defined in one place but the
implemenation makes it difficult to do properly. (See
above.)
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
It is truer to the semantics of logging for messages to *always*
go to the message buffer, where they can eventually be collected
and, in fact, be put into a log file.
This restores the behavior prior to r70239, which seems to have
changed it inadvertently.
Submitted by: Eric Badger <eric@badgerio.us>
Reviewed by: jhb
Approved by: kib (mentor)
Obtained from: Dell Inc.
MFC after: 1 week
in bitfield argument is wrong, as it will be treated as bit 10, causing any
code printing >=10 bits with bit 10 on as having a trailing comma.
Newline (intended one) should be part of the format string (already present
in the examples).
Also fix grammar and kill EOL whitespace in comment while here.
PR: 195005
Approved by: bdrewery
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
routine, now a platform can provide a pointer to an early_putc() routine
which is used instead of cn_putc(). Control can be handed off from early
printf support to standard console support by NULLing out the pointer
during standard console init.
This leverages all the existing error reporting that uses printf calls,
such as panic() which can now be usefully employed even in early
platform init code (useful at least to those who maintain that code and
build kernels with EARLY_PRINTF defined).
Reviewed by: imp, eadler
paper trail now, this patch is similar to one posted for one of the
preliminary versions of a new armv6 port. I took them and made them
more generic. Option not enabled by default since each board/port has
to provide its own eputc, and possibly do other things as well...
continuous calls to the uprintf(9), the proctree_lock could be
shared-locked for indefinite amount of time, starving exclusive
requests. Since proctree_lock is needed for fork() and exit(), this
effectively stops the machine.
While there, do the similar reduction for tprintf(9).
Reported and tested by: pho
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (glebius)
Otherwise, p_bufr is set to garbage on the stack, and if that garbage
happens to be non-NULL, and the TOLOG or TOCONS flag is set, putbuf()
will get called and attempt to fill the non-existent buffer.
This is really only relevant for tprintf() (and only when the priority is
not -1), but set it in uprintf() and ttyprintf() for completeness.
The next step, to avoid log buffer scrambling, would be to add the
PRINTF_BUFR_SIZE code to tprintf(), but this should prevent panics.
Submitted by: rmacklem
Found by: pho
While we have had a fix in place (options PRINTF_BUFR_SIZE=128) to fix
scrambled console output, the message buffer and syslog were still getting
log messages one character at a time. While all of the characters still
made it into the log (courtesy of atomic operations), they were often
interleaved when there were multiple threads writing to the buffer at the
same time.
This fixes message buffer accesses to use buffering logic as well, so that
strings that are less than PRINTF_BUFR_SIZE will be put into the message
buffer atomically. So now dmesg output should look the same as console
output.
subr_msgbuf.c: Convert most message buffer calls to use a new spin
lock instead of atomic variables in some places.
Add a new routine, msgbuf_addstr(), that adds a
NUL-terminated string to a message buffer. This
takes a priority argument, which allows us to
eliminate some races (at least in the the string
at a time case) that are present in the
implementation of msglogchar(). (dangling and
lastpri are static variables, and are subject to
races when multiple callers are present.)
msgbuf_addstr() also allows the caller to request
that carriage returns be stripped out of the
string. This matches the behavior of msglogchar(),
but in testing so far it doesn't appear that any
newlines are being stripped out. So the carriage
return removal functionality may be a candidate
for removal later on if further analysis shows
that it isn't necessary.
subr_prf.c: Add a new msglogstr() routine that calls
msgbuf_logstr().
Rename putcons() to putbuf(). This now handles
buffered output to the message log as well as
the console. Also, remove the logic in putcons()
(now putbuf()) that added a carriage return before
a newline. The console path was the only path that
needed it, and cnputc() (called by cnputs())
already adds a carriage return. So this
duplication resulted in kernel-generated console
output lines ending in '\r''\r''\n'.
Refactor putchar() to handle the new buffering
scheme.
Add buffering to log().
Change log_console() to use msglogstr() instead of
msglogchar(). Don't add extra newlines by default
in log_console(). Hide that behavior behind a
tunable/sysctl (kern.log_console_add_linefeed) for
those who would like the old behavior. The old
behavior led to the insertion of extra newlines
for log output for programs that print out a
string, and then a trailing newline on a separate
write. (This is visible with dmesg -a.)
msgbuf.h: Add a prototype for msgbuf_addstr().
Add three new fields to struct msgbuf, msg_needsnl,
msg_lastpri and msg_lock. The first two are needed
for log message functionality previously handled
by msglogchar(). (Which is still active if
buffering isn't enabled.)
Include sys/lock.h and sys/mutex.h for the new
mutex.
Reviewed by: gibbs
Normally msgbufp is locked using Giant. Switch it to use the
msgbuf_lock. Instead of changing the tsleep() calls to msleep(), just
convert it to condvar(9).
In my opinion the locking around msgbuf_peekbytes() still remains
questionable. It looks like locks are dropped while performing copies of
multiple blocks to userspace, which may cause the msgbuf to be reset in
the mean time. At least getting it underneath from Giant should make it
a little easier for us to figure out how to solve that.
Reminded by: rdivacky
printf() and vprintf() are exactly the same, except the way arguments
are passed. Just like we see in other pieces of code (i.e. libc's
printf()), implement printf() using vprintf().
Submitted by: Christoph Mallon <christoph mallon gmx de>
As mentioned by bz and bde, the change I made wasn't the proper way to
fix. Inspired by bde's patch, perform some small cleanups to uprintf().
Reviewed by: bz
`p' is already initialized with `td->td_proc'. Because td is always
curthread, it is safe to initialize it without any locks.
Found by: LLVM's scan-build
In r185891 I removed the newlines from messages written to /dev/console,
because it made startup messages from rc-scripts harder to read. This,
unfortunately, causes the kernel message that is printed after a
non-terminated log message to be concatenated.
This could be fixed, but on short term it's better to just revert the
change.
Reported by: Jaakko Heinonen <jh saunalahti fi>
The /dev/console device node logs all strings that are written to it.
When the string does not contain a trailing newline, it appends one. I
can imagine this was useful a long time ago, but with our current
rc-scripts, it generates a whole bunch of messages that look like:
| Configuring syscons:
| blanktime
| .
By not appending the newlines, the output of `dmesg -a' is now (almost?)
exactly the same as what the user will see on the console device
(syscons, uart).
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
a thread is an idle thread, just see if it has the IDLETD
flag set. That flag will probably move to the pflags word
as it's permenent and never chenges for the life of the
system so it doesn't need locking.
by default for sun4v where it is absolutely required.
This change moves the buffer from struct pcpu to the stack to avoid
using the critical section which created a LOR in a couple of cases
due to interaction with the tty code and kqueue. The LOR can't be
fixed with the critical section and the pcpu buffer can't be used
without the critical section.
Putting the buffer on the stack was my initial solution, but it was
pointed out that the stress on the stack might cause problems
depending on the call path. We don't have a way of creating tests
for those possible cases, so it's best to leave this as an option
for the time being. In time we may get enough data to enable this
option more generally.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
a lock to prevent interspersed strings written from different CPUs
at the same time.
To avoid putting a buffer on the stack or having to malloc one,
space is incorporated in the per-cpu structure. The buffer
size if 128 bytes; chosen because it's the next power of 2 size
up from 80 characters.
String writes to the console are buffered up the end of the line
or until the buffer fills. Then the buffer is flushed to all
console devices.
Existing low level console output via cnputc() is unaffected by
this change. ithread calls to log() are also unaffected to avoid
blocking those threads.
A minor change to the behaviour in a panic situation is that
console output will still be buffered, but won't be written to
a tty as before. This should prevent interspersed panic output
as a number of CPUs panic before we end up single threaded
running ddb.
Reviewed by: scottl, jhb
MFC after: 2 weeks
with other commonly used sysctl name spaces, rather than declaring them
all over the place.
MFC after: 1 month
Sponsored by: nCircle Network Security, Inc.
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer). So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt. Also, now that it's easy to do so,
enable paging by default for all ddb commands. Any command that wishes to
honor the quit flag can do so by checking db_pager_quit. Note that the
pager can also be effectively disabled by setting $lines to 0.
Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
the vast majority of cases, these functions are called without mutexes
held, meaning that in all but two cases, there will be no ordering
issues with doing this, and it will eliminate the need for changes in
the caller. In two cases, mutexes are held, so Giant must be acquired
before those mutexes such that uprintf() and tprintf() recurse Giant
rather than generating a lock order reversal.
Suggested by: bde
nor uprintf() is believed to perform tsleep() or msleep() as written,
as ttycheckoutq() is called with '0' as its sleep argument.
Remove recently added WITNESS warnings for sleep as the comment was
incorrect. This should silence a warning from the nfs_timer() code.
Discussed with: bde
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
remaining % arguments because the varargs are now out of sync and
there is a risk that we might for instance dereference an integer
in a %s argument.
Sponsored by: Napatech.com
session in tprintf(). SESSRELE() needs to properly dispose of the
sessions mutex.
Add sessrele() which does the proper cleanup and have SESSRELE() call it.
Use SESSRELE also in pgdelete().
Found by: Coverity (ID:526)
