to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
other than the one specified by the BOOTP server. This configures NFS
using the BOOTP protocol while also respecting other root-path options such
as setting vfs.root.mountfrom in the environment or using the RB_DFLTROOT
boot option. It allows you to override the root path provided by the
server, or to supply a root path when the server provides IP configuration
but no root path info.
This maintains the historical BOOTP_NFSROOT behavior of panicking on a
failure to mount the root path provided by the server, unless you've
provided an alternative via the ROOTDEVNAME kernel option or by setting
vfs.root.mountfrom. The behavior of panicking when given no other options
is preserved because it amounts to a bit of a retry loop that could
eventually recover from a transient network or server problem.
The user can now override the root path from loader(8) even if the
kernel is compiled with BOOTP_NFSROOT. If vfs.root.mountfrom is set in
the environment it is used unconditionally -- it always overrides the
BOOTP info. If it begins with [old]nfs: then the BOOTP code uses it
instead of the server-provided info. If it specifies some other
filesystem then the bootp code will not panic like it used to and the code
in vfs_mountroot.c will invoke the right filesystem to do the mount.
If the kernel is compiled with the ROOTDEVNAME option, then that name is
used by the BOOTP code if either
* The server doesn't provide a pathname.
* The boothowto flags include RB_DFLTROOT.
The latter allows the user to compile in alternate path in ROOTDEVNAME
such as ufs:/dev/da0s1a and boot from that path by setting
boot_dftlroot=1 in loader(8) or using the '-r' option in boot(8).
The one thing not provided here is automatic failover from a
server-provided path to a compiled-in one without the user manually
requesting that. The code just isn't currently structured in a way that
makes that possible with a lot of rewrite. I think the ability to set
vfs.root.mountfrom and to use ROOTDEVNAME automatically when the server
doesn't provide a name covers the most common needs.
A set of patches submitted by Lars Eggert provided the part I couldn't
figure out by myself when I tried to do this last year; many thanks.
Reviewed by: rodrigc
and that can drive someone crazy. While m_get2() is young and not
documented yet, change its order of arguments to match m_getm2().
Sorry for churn, but better now than later.
which dumps out the actual options being used by an NFS mount.
This will be used to implement a "-m" option for nfsstat(1).
Reviewed by: alfred
MFC after: 2 weeks
processes running as root to suspend/resume execution
of the kernel nfsd threads. An earlier version of this
patch was tested by Vincent Hoffman (vince at unsane.co.uk)
and John Hickey (jh at deterlab.net).
Reviewed by: kib
MFC after: 2 weeks
Add timeout to wait for network controllers to appear when netbooting.
USB ethernet adapter initialization usually is delayed and
they're not available immidiately after autoconfiguration. So we need
to wait a bit before giving up
Reviewed by: stas@
the original IPv4 implementation from r178888:
- Use RT_DEFAULT_FIB in the IPv4 implementation where noticed.
- Use rt*fib() KPI with explicit RT_DEFAULT_FIB where applicable in
the NFS code.
- Use the new in6_rt* KPI in TCP, gif(4), and the IPv6 network stack
where applicable.
- Split in6_rtqtimo() and in6_mtutimo() as done in IPv4 and equally
prevent multiple initializations of callouts in in6_inithead().
- Use wrapper functions where needed to preserve the current KPI to
ease MFCs. Use BURN_BRIDGES to indicate expected future cleanup.
- Fix (related) comments (both technical or style).
- Convert to rtinit() where applicable and only use custom loops where
currently not possible otherwise.
- Multicast group, most neighbor discovery address actions and faith(4)
are locked to the default FIB. Individual IPv6 addresses will only
appear in the default FIB, however redirect information and prefixes
of connected subnets are automatically propagated to all FIBs by
default (mimicking IPv4 behavior as closely as possible).
Sponsored by: Cisco Systems, Inc.
usage, but end up with more changes.
- Use SIOCAIFADDR instead of old rusty SIOCSIFADDR, SIOCSIFBRDADDR
and SIOCSIFNETMASK.
- Use queue(9) instead of hand made stailq.
- Use one socket for all ifioctl() and send/receive operations.
- Use __func__ instead of cut-n-paste in logging and panics.
- Axe some dead or strange code.
Tested by: gonzo, Stefan Bethke <stb lassitu.de>
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
checking at open time. It may improve performance for read-only
NFS mounts. Use deliberately.
MFC after: 1 week
Reviewed by: rmacklem, jhb (earlier version)
set the f_flags field of "struct statfs". This had the interesting
effect of making the NFSv4 mounts "disappear" after r221014,
since NFSMNT_NFSV4 and MNT_IGNORE became the same bit.
Move the files used for a diskless NFS root from sys/nfsclient
to sys/nfs in preparation for them to be used by both NFS
clients. Also, move the declaration of the three global data
structures from sys/nfsclient/nfs_vfsops.c to sys/nfs/nfs_diskless.c
so that they are defined when either client uses them.
Reviewed by: jhb
MFC after: 2 weeks
signal to the master nfsd daemon whenever the stable restart
file has been modified. This will allow the master nfsd daemon
to maintain an up to date backup copy of the file. This is
enabled via the nfssvc() syscall, so that older nfsd daemons
will not be signaled.
Reviewed by: jhb
MFC after: 1 week
by both clients. Since the NLM uses various fields of the
nfsmount structure, those fields were extracted and put in a
separate nfs_mountcommon structure stored in sys/nfs/nfs_mountcommon.h.
This structure also has a function pointer for a function that
extracts the required information from the mount point and nfs vnode
for that particular client, for information stored differently by the
clients.
Reviewed by: jhb
MFC after: 2 weeks
module that can be used by both the regular and experimental nfs
clients. This fixes the problem reported by jh@ where /dev/nfslock
would be registered twice when both nfs clients were used.
I also defined the size of the lm_fh field to be the correct value,
as it should be the maximum size of an NFSv3 file handle.
Reviewed by: jh
MFC after: 2 weeks
module. With r203732 it became apparent that creating the sysctl nodes
twice causes at least a warning, however the whole code shouldn't be
present twice in the first place.
Discussed with: rmacklem
remove the NFS server version in order to reduce code duplication.
The shared version now uses a second parameter how, which is passed
on to m_get(9) and m_getcl(9) as the server used M_WAIT while the
client requires M_DONTWAIT, and replaces the the previously unused
parameter hsiz.
- Change nfs_realign() to use nfsm_aligned() so as with other NFS code
the alignment check isn't actually performed on platforms without
strict alignment requirements for performance reasons because as the
comment suggests unaligned data only occasionally occurs with TCP.
- Change fha_extract_info() to use nfs_realign() with M_DONTWAIT rather
than M_WAIT because it's called with the RPC sp_lock held.
Reviewed by: jhb, rmacklem
MFC after: 1 week
The D-cache flushing added here was to deal with I-cache
incoherency observed on ia64. However, the problem was
in the implementation of pmap_enter_object() for ia64:
it was missing I-cache coherency logic for prefaulted
pages. After this got added in rev 195625, testing showed
that no D-cache flushing was required.
The SIGILL that was observed on Book-E (see commit log
for rev 192323) ended up not being related to I-cache
incoherency, but was found to be caused by bad memory.
This discovery further undermined the need for D-cache
flushing in the NFS I/O code, triggering the reversal.
Approved by: re (kensmith)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
possible future I-cache coherency operation can succeed. On ARM
for example the L1 cache can be (is) virtually mapped, which
means that any I/O that uses temporary mappings will not see the
I-cache made coherent. On ia64 a similar behaviour has been
observed. By flushing the D-cache, execution of binaries backed
by md(4) and/or NFS work reliably.
For Book-E (powerpc), execution over NFS exhibits SIGILL once in
a while as well, though cpu_flush_dcache() hasn't been implemented
yet.
Doing an explicit D-cache flush as part of the non-DMA based I/O
read operation eliminates the need to do it as part of the
I-cache coherency operation itself and as such avoids pessimizing
the DMA-based I/O read operations for which D-cache are already
flushed/invalidated. It also allows future optimizations whereby
the bcopy() followed by the D-cache flush can be integrated in a
single operation, which could be implemented using on-chips DMA
engines, by-passing the D-cache altogether.
sharing of the nfssvc() system call between nfsserver and the nfsv4
server. Building of nfs_nfssvc.c will be committed later, at the time
the .c files in sys/nfsserver are updated. To do so now would result in
nfssvc() multiply defined.
Submitted by: rmacklem
Reviewed by: dfr
Approved by: kib (mentor)
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.
Reviewed by: arch
There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
- Fix nfsm_disct() so that after pulling up data, the remaining data
is aligned if necessary.
- Fix nfs_clnt_tcp_soupcall() to bcopy() the rpc length out of the
mbuf (instead of casting m_data to a uint32).
Submitted by: Pyun YongHyeon
Reviewed by: Mohan Srinivasan
socket callbacks or similar callers, from both the NFS client and the
server.
Instituted nfsm_dissect_nonblock(), nfsm_dissect_xx_nonblock(). And
nfsm_disct() now takes an extra M_TRYWAIT/M_DONTWAIT argument.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
