- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
it will work with either the old or new server.
The FHA code keeps a cache of currently active file handles for
NFSv2 and v3 requests, so that read and write requests for the same
file are directed to the same group of threads (reads) or thread
(writes). It does not currently work for NFSv4 requests. They are
more complex, and will take more work to support.
This improves read-ahead performance, especially with ZFS, if the
FHA tuning parameters are configured appropriately. Without the
FHA code, concurrent reads that are part of a sequential read from
a file will be directed to separate NFS threads. This has the
effect of confusing the ZFS zfetch (prefetch) code and makes
sequential reads significantly slower with clients like Linux that
do a lot of prefetching.
The FHA code has also been updated to direct write requests to nearby
file offsets to the same thread in the same way it batches reads,
and the FHA code will now also send writes to multiple threads when
needed.
This improves sequential write performance in ZFS, because writes
to a file are now more ordered. Since NFS writes (generally
less than 64K) are smaller than the typical ZFS record size
(usually 128K), out of order NFS writes to the same block can
trigger a read in ZFS. Sending them down the same thread increases
the odds of their being in order.
In order for multiple write threads per file in the FHA code to be
useful, writes in the NFS server have been changed to use a LK_SHARED
vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem
doesn't allow multiple writers to a file at once. ZFS is currently
the only filesystem that allows multiple writers to a file, because
it has internal file range locking. This change does not affect the
NFSv4 code.
This improves random write performance to a single file in ZFS, since
we can now have multiple writers inside ZFS at one time.
I have changed the default tuning parameters to a 22 bit (4MB)
window size (from 256K) and unlimited commands per thread as a
result of my benchmarking with ZFS.
The FHA code has been updated to allow configuring the tuning
parameters from loader tunable variables in addition to sysctl
variables. The read offset window calculation has been slightly
modified as well. Instead of having separate bins, each file
handle has a rolling window of bin_shift size. This minimizes
glitches in throughput when shifting from one bin to another.
sys/conf/files:
Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c
when either the old or the new NFS server is built.
sys/fs/nfs/nfsport.h,
sys/fs/nfs/nfs_commonport.c:
Bring in changes from Rick Macklem to newnfs_realign that
allow it to operate in blocking (M_WAITOK) or non-blocking
(M_NOWAIT) mode.
sys/fs/nfs/nfs_commonsubs.c,
sys/fs/nfs/nfs_var.h:
Bring in a change from Rick Macklem to allow telling
nfsm_dissect() whether or not to wait for mallocs.
sys/fs/nfs/nfsm_subs.h:
Bring in changes from Rick Macklem to create a new
nfsm_dissect_nonblock() inline function and
NFSM_DISSECT_NONBLOCK() macro.
sys/fs/nfs/nfs_commonkrpc.c,
sys/fs/nfsclient/nfs_clkrpc.c:
Add the malloc wait flag to a newnfs_realign() call.
sys/fs/nfsserver/nfs_nfsdkrpc.c:
Setup the new NFS server's RPC thread pool so that it will
call the FHA code.
Add the malloc flag argument to newnfs_realign().
Unstaticize newnfs_nfsv3_procid[] so that we can use it in
the FHA code.
sys/fs/nfsserver/nfs_nfsdsocket.c:
In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types
that use the LK_SHARED lock type.
sys/fs/nfsserver/nfs_nfsdport.c:
In nfsd_fhtovp(), if we're starting a write, check to see
whether the underlying filesystem supports shared writes.
If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE.
sys/nfsserver/nfs_fha.c:
Remove all code that is specific to the NFS server
implementation. Anything that is server-specific is now
accessed through a callback supplied by that server's FHA
shim in the new softc.
There are now separate sysctls and tunables for the FHA
implementations for the old and new NFS servers. The new
NFS server has its tunables under vfs.nfsd.fha, the old
NFS server's tunables are under vfs.nfsrv.fha as before.
In fha_extract_info(), use callouts for all server-specific
code. Getting file handles and offsets is now done in the
individual server's shim module.
In fha_hash_entry_choose_thread(), change the way we decide
whether two reads are in proximity to each other.
Previously, the calculation was a simple shift operation to
see whether the offsets were in the same power of 2 bucket.
The issue was that there would be a bucket (and therefore
thread) transition, even if the reads were in close
proximity. When there is a thread transition, reads wind
up going somewhat out of order, and ZFS gets confused.
The new calculation simply tries to see whether the offsets
are within 1 << bin_shift of each other. If they are, the
reads will be sent to the same thread.
The effect of this change is that for sequential reads, if
the client doesn't exceed the max_reqs_per_nfsd parameter
and the bin_shift is set to a reasonable value (22, or
4MB works well in my tests), the reads in any sequential
stream will largely be confined to a single thread.
Change fha_assign() so that it takes a softc argument. It
is now called from the individual server's shim code, which
will pass in the softc.
Change fhe_stats_sysctl() so that it takes a softc
parameter. It is now called from the individual server's
shim code. Add the current offset to the list of things
printed out about each active thread.
Change the num_reads and num_writes counters in the
fha_hash_entry structure to 32-bit values, and rename them
num_rw and num_exclusive, respectively, to reflect their
changed usage.
Add an enable sysctl and tunable that allows the user to
disable the FHA code (when vfs.XXX.fha.enable = 0). This
is useful for before/after performance comparisons.
nfs_fha.h:
Move most structure definitions out of nfs_fha.c and into
the header file, so that the individual server shims can
see them.
Change the default bin_shift to 22 (4MB) instead of 18
(256K). Allow unlimited commands per thread.
sys/nfsserver/nfs_fha_old.c,
sys/nfsserver/nfs_fha_old.h,
sys/fs/nfsserver/nfs_fha_new.c,
sys/fs/nfsserver/nfs_fha_new.h:
Add shims for the old and new NFS servers to interface with
the FHA code, and callbacks for the
The shims contain all of the code and definitions that are
specific to the NFS servers.
They setup the server-specific callbacks and set the server
name for the sysctl and loader tunable variables.
sys/nfsserver/nfs_srvkrpc.c:
Configure the RPC code to call fhaold_assign() instead of
fha_assign().
sys/modules/nfsd/Makefile:
Add nfs_fha.c and nfs_fha_new.c.
sys/modules/nfsserver/Makefile:
Add nfs_fha_old.c.
Reviewed by: rmacklem
Sponsored by: Spectra Logic
MFC after: 2 weeks
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
* VM_OBJECT_LOCK and VM_OBJECT_UNLOCK are mapped to write operations
* VM_OBJECT_SLEEP() is introduced as a general purpose primitve to
get a sleep operation using a VM_OBJECT_LOCK() as protection
* The approach must bear with vm_pager.h namespace pollution so many
files require including directly rwlock.h
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
If you have a binary on a filesystem which is also mounted over by
nullfs, you could execute the binary from the lower filesystem, or
from the nullfs mount. When executed from lower filesystem, the lower
vnode gets VV_TEXT flag set, and the file cannot be modified while the
binary is active. But, if executed as the nullfs alias, only the
nullfs vnode gets VV_TEXT set, and you still can open the lower vnode
for write.
Add a set of VOPs for the VV_TEXT query, set and clear operations,
which are correctly bypassed to lower vnode.
Tested by: pho (previous version)
MFC after: 2 weeks
the full length from offset is being flushed. Note that for now VOP_FSYNC
does not support offset and length parameters so we still do the same full
VOP_FSYNC. This issue was reported at FreeNAS support site as FreeNAS
ticket #1096.
Submitted by: "ceckerle" <ce.freenas eckerle net>
Prodded by: gcooper
Reviewed by: rmacklem
MFC after: 2 weeks
NFS server and reuse it for writes as well to allow writes to the backing
store to be clustered.
- Use a prime number for the size of the heuristic table (1017 is not
prime).
- Move the logic to locate a heuristic entry from the table and compute
the sequential count out of VOP_READ() and into a separate routine.
- Use the logic from sequential_heuristic() in vfs_vnops.c to update the
seqcount when a sequential access is performed rather than just
increasing seqcount by 1. This lets the clustering count ramp up
faster.
- Allow for some reordering of RPCs and if it is detected leave the current
seqcount as-is rather than dropping back to a seqcount of 1. Also,
when out of order access is encountered, cut seqcount in half rather than
dropping it all the way back to 1 to further aid with reordering.
- Fix the new NFS server to properly update the next offset after a
successful VOP_READ() so that the readahead actually works.
Some of these changes came from an earlier patch by Bjorn Gronwall that was
forwarded to me by bde@.
Discussed with: bde, rmacklem, fs@
Submitted by: Bjorn Gronwall (1, 4)
MFC after: 2 weeks
which requires that ni_strictrelative be set to 0, post-r224810.
Tested by: swills (earlier version), geo dot liaskos at gmail.com
Approved by: re (kib)
kernel for FreeBSD 9.0:
Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *. With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.
Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.
In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.
Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.
Approved by: re (bz)
Submitted by: jonathan
Sponsored by: Google Inc
the NFS subsystems use five of the rpcsec_gss/kgssapi entry points,
but since it was not obvious which others might be useful, all
nineteen were included. Basically the nineteen entry points are
set in a structure called rpc_gss_entries and inline functions
defined in sys/rpc/rpcsec_gss.h check for the entry points being
non-NULL and then call them. A default value is returned otherwise.
Requested by rwatson.
Reviewed by: jhb
MFC after: 2 weeks
method, so that callers can indicate the minimum vnode
locking requirement. This will allow some file systems to choose
to return a LK_SHARED locked vnode when LK_SHARED is specified
for the flags argument. This patch only adds the flag. It
does not change any file system to use it and all callers
specify LK_EXCLUSIVE, so file system semantics are not changed.
Reviewed by: kib
PMC/SYSV/...).
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: arch@ (parts by rwatson, trasz, jhb)
X-MFC after: to be determined in last commit with code from this project
incorrectly calling vm_object_page_clean(). They are passing the length of
the range rather than the ending offset of the range.
Perform the OFF_TO_IDX() conversion in vm_object_page_clean() rather than the
callers.
Reviewed by: kib
MFC after: 3 weeks
so turn off UFS-specific hack that assumes so in ZFS case.
Before the change we can miss returning some directory entries to a
NFS client.
I believe that the hack should be moved to ufs_readdir(), but until we find
somebody who will do it, turn it off for ZFS in NFS server code.
Submitted by: rmacklem
Discussed with: rmacklem, mckusick
MFC after: 3 days
busy. This fixes a race where we can pass invalid mount point to VFS_VGET()
via vp->v_mount when exported file system was forcibly unmounted between
nfsrv_fhtovp() and VFS_VGET().
Reviewed by: kib
MFC after: 5 days
this is the only place that is different from all the other nfsrv_fhtovp()
consumers.
This simplifies nfsrv_fhtovp() a bit and also eliminates one
vn_lock/VOP_UNLOCK() cycle in case of NFSv3.
- Implement NFSRV_FLAG_BUSY flag for nfsrv_fhtovp() that tells it to leave
mount point busy.
Reviewed by: kib
MFC after: 5 days
only for !usevget case. If VFS_VGET is working, the vnode shared lock
is obtained recursively and vput() shall be done, not vunref().
Submitted by: rmacklem
Tested by: Josh Carroll <josh.carroll gmail com>
MFC after: 3 days
not support VFS_VGET, like msdosfs, do not call VOP_LOOKUP() for
dotdot on the root directory. Our filesystems expect that VFS handles
dotdot lookups on root on its own.
Reported and tested by: kevlo
MFC after: 2 weeks
- We are fine by only share-locking the vnode.
- Remove assertion that doesn't hold for ZFS where we cross mount points
boundaries by going into .zfs/snapshot/<name>/.
Reviewed by: rmacklem
MFC after: 1 month
for all errors returned by VFS_FHTOVP(). This is required to ensure
that EIO doesn't get returned to the client when ZFS is used as the
server file system.
Tested by: korvus AT comcast.net
Reviewed by: jhb
MFC after: 2 weeks
module. With r203732 it became apparent that creating the sysctl nodes
twice causes at least a warning, however the whole code shouldn't be
present twice in the first place.
Discussed with: rmacklem
remove the NFS server version in order to reduce code duplication.
The shared version now uses a second parameter how, which is passed
on to m_get(9) and m_getcl(9) as the server used M_WAIT while the
client requires M_DONTWAIT, and replaces the the previously unused
parameter hsiz.
- Change nfs_realign() to use nfsm_aligned() so as with other NFS code
the alignment check isn't actually performed on platforms without
strict alignment requirements for performance reasons because as the
comment suggests unaligned data only occasionally occurs with TCP.
- Change fha_extract_info() to use nfs_realign() with M_DONTWAIT rather
than M_WAIT because it's called with the RPC sp_lock held.
Reviewed by: jhb, rmacklem
MFC after: 1 week
the commit message for r201896 actually should have read:
As nfsm_srvmtofh_xx() assumes the 4-byte alignment required by XDR
ensure the mbuf data is aligned accordingly by calling nfs_realign()
in fha_extract_info(). This fix is orthogonal to the problem solved
by r199274/r199284.
PR: 142102 (second part)
MFC after: 1 week
Previously the failing operation would allocate an mbuf and construct an
error reply, but because the function did not return 0, the NFS server
assumed it had failed to generate a reply and would leak the reply mbuf as
well as not sending the reply to the NFS client.
PR: kern/140853
Submitted by: Ted Faber faber at isi edu (remove)
Reviewed by: rmacklem (remove)
MFC after: 1 week
This completes the fix from r185586.
PR: kern/139059
Reported by: Daniel Braniss <danny@cs.huji.ac.il>
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
Tested by: Daniel Braniss <danny@cs.huji.ac.il>
MFC after: 3 days
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
SVCXPTR structure returned by them, it was possible for the structure
to be free'd before svc_reg() had been completed using the structure.
This patch acquires a reference count on the newly created structure
that is returned by svc_[dg|vc|tli|tp]_create(). It also
adds the appropriate SVC_RELEASE() calls to the callers, except the
experimental nfs subsystem. The latter will be committed separately.
Submitted by: dfr
Tested by: pho
Approved by: kib (mentor)
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex. Jails may
have their own host information, or they may inherit it from the
parent/system. The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL. The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.
The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.
Approved by: bz (mentor)
