Add -o [no]verify option to mdconfig (and document in man page.)
Implement GEOM attribute MNT::verified to ask md if the backing vnode is
verified.
Check for MNT::verified in cd9660 mount to flag the mount as MNT_VERIFIED if
the underlying device has been verified.
Reviewed by: rwatson
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2902
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
This includes some whitespace and minor bug fixes relative to NetBSD,
which will be submitted upstream at the conclusion of the makefs
msdos update.
NetBSD revs:
mkfs_msdos.c 1.11
mkfs_msdos.h 1.4
newfs_msdos.8 1.22
newfs_msdos.c 1.44
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Reviewed by: emaste
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
The MAC address reported by `ifconfig ${nic} ether' does not always match
the address in the hardware, as reported by the driver during attach. In
particular, NICs which are components of a lagg(4) interface all report the
same MAC.
When attaching, the NIC driver passes the MAC address it read from the
hardware as an argument to ether_ifattach(). Keep a second copy of it, and
create ioctl(SIOCGHWADDR) to return it. Teach `ifconfig' to report it along
with the active MAC address.
PR: 194386
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D10609
The NFSv4 protocol doesn't use the Mount protocol, so it doesn't make sense
to add an entry for an NFSv4 mount to /var/db/mounttab. Also, r308871
modified umount so that it doesn't remove any entry created by mount_nfs.
Reported on freebsd-current@.
Reported by: clbuisson@orange.fr
MFC after: 2 weeks
lease file.
Some routers set very large values for rebind time (Netgear) and these
are erroneously reported as negative in the leasefile. This was due to a
wrong printf format specification of %ld for an unsigned long on 32-bit
platforms.
They would overflow a signed 32-bit time_t on 32 bit architectures. This
was taken care of, but a compiler optimisation makes this behave
erratically. This could be resolved by adding a -fwrapv flag, but
instead we can check the value before adding the current timestamp to
it.
In the lease file values are still wrong though:
option dhcp-rebinding-time -644245096;
PR: 218980
Reported by: Bob Eager
MFC after: 2 weeks
specific parameter.
Tape drives include write protect (WP), Buffered Mode and Speed
settings in the device-specific parameter. Clearing this
parameter on a mode select can have the effect of turning off
write protect or buffered mode, or changing the speed setting of
the tape drive.
Disks report DPO/FUA support via the device specific parameter
for MODE SENSE, but the bit is reserved for MODE SELECT. So we
clear this for disks (and other non-tape devices) to avoid
potential errors from the target device.
sbin/camcontrol/modeedit.c:
Clear the device-specific parameter in the mode page
header if we're not operating on a tape drive.
MFC after: 3 days
Sponsored by: Spectra Logic
name and unit number in camcontrol(8).
Previously camcontrol(8) only supported rescanning or resetting
devices specified by bus:target:lun. This is because for
rescanning at least, you don't have a peripheral name and unit
number (e.g. da4) for devices that don't exist yet.
That is still the case after this change, but in other cases, when
the device does exist in the CAM EDT (Existing Device Table), we
do a careful lookup of the bus/target/lun if the user supplies a
peripheral name and unit number to find the bus:target:lun and then
issue the requested reset or rescan.
The lookup is done without actually opening the device in question,
since a rescan is often done to make a device go away after it has
been pulled. (This is especially true for busses/controllers, like
parallel SCSI controllers, that don't automatically detect changes
in topology.) Opening a device that is no longer there to
determine the bus/target/lun might result in error recovery actions
when the user really just wanted to make the device go away.
sbin/camcontrol/camcontrol.c:
In dorescan_or_reset(), if the use hasn't specified a
numeric argument, assume he has specified a device. Lookup
the pass(4) instance for that device using the transport
layer CAMGETPASSTHRU ioctl. If that is successful, we can
use the returned bus:target:lun to rescan or reset the
device.
Under the hood, resetting a device using XPT_RESET_DEV is
actually sent via the pass(4) device anyway. But this
provides a way for the user to specify devices in a more
convenient way, and can work on device rescans when the
device is going away, assuming it still exists in the EDT.
sbin/camcontrol/camcontrol.8:
Update the man page for the rescan and reset subcommands
to reflect that you can now use a device name and unit
number with them.
Sponsored by: Spectra Logic
MFC after: 3 days
ifconfig doesn't correctly infer mlx interfaces' module names, so it will
attempt to load the mlx(4) module even when not necessary.
Reported by: rstone
MFC after: 3 weeks
X-MFC-With: 317755
Sponsored by: Spectra Logic Corp
* Exit early if kldload(2) fails (1011259). This is the only change that
affects ifconfig's behavior.
* Close memory and resource leaks (1305624, 1305205, 1007100)
* Mark usage() as _Noreturn (1305806, 1305750)
* Fix some dereference after null checks (1011474, 270774)
Reported by: Coverity
CID: 1305624, 1305205, 1007100, 1305806, 1305750, 1011474,
CID: 270774, 1011259
Reviewed by: cem
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10587
camcontrol timestamp -s would somtimes fail due to stack garbage. Zero out
the timestamp parameters to fix it.
Fix another nearby bug, and update the man page.
sbin/camcontrol/timestamp.c:
In set_timestamp(), bzero ts_p prior to creating the timestamp.
Previously stack garbage could cause some tape drives to reject the
timestamp.
In set_timestamp(), check for failures from strptime().
sbin/camcontrol/camcontrol.8:
Add the time argument to the -T option to camcontrol timestamp -s
in the long description.
Change the time/date format used in the camcontrol timestamp
example to RFC 2822 format. This fixes a time zone issue with the
original example by specifying the time zone as -0600. Otherwise,
the time zone seems to default to standard time in the current
locale, which makes the time, when reported back from the drive,
1 hour off from the intended setting. This also fixes a duplicate
day of the week ("Wednesday Wed") in the previous example.
Submitted by: Sam Klopsch
MFC after: 3 days
Sponsored by: Spectra Logic
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
Instead of casting listmax and numdirs to unsigned values just define
them as unsigned and avoid the casts. Use reallocarray(3).
While here, fs_ncg is already unsigned so the cast is unnecessary.
Reviewed by: mckusick
MFC after: 2 weeks
Before this change it was impossible to set number of PKCS#5v2 iterations,
required to set passphrase, if it has two keys and never had any passphrase.
Due to present metadata format limitations there are still cases when number
of iterations can not be changed, but now it works in cases when it can.
PR: 218512
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10338
messages before accessing message fields that may not be present,
removing dead/duplicate/misleading code along the way.
Document the message format for each routing socket message in
route.h.
Fix a bug in usr.bin/netstat introduced in r287351 that resulted in
pointer computation with essentially random 16-bit offsets and
dereferencing of the results.
Reviewed by: ae
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10330
I was swayed a little too quickly when I saw the wiki page discussing
kB vs KiB. Switch back as none of the code in base openly uses
IEC units via humanize_number(3) (which was my next step), and there's
a large degree of dislike with IEC vs more SI-like units.
MFC after: 7 weeks
Submitted by: jhb, rgrimes
Sponsored by: Dell EMC Isilon
- Use strtoll(3) instead of atoi(3), because atoi(3) limits the
representable data to INT_MAX. Check the values received from
strtoll(3), trimming trailing whitespace off the end to maintain
POLA.
- Use `KiB` instead of `kB` when describing free space, total space,
etc. I am now fully aware of `KiB` being the IEC standard for 1024
bytes and `kB` being the IEC standard for 1000 bytes.
- Store available number of KiB in `available` so it can be more
easily queried and compared to ensure that there are enough KiB to
store the dump image on disk.
- Print out the reserved space on disk, per `minfree`, so end-users
can troubleshoot why check_space(..) is reporting that there isn't
enough free space.
MFC after: 7 weeks
Reviewed by: Anton Rang <rang@acm.com> (earlier diff), cem (earlier diff)
Tested with: positive/negative cases (see review); make tinderbox
Sponsored by: Dell EMC Isilon
Differential Revision: D10379
The loop that scans the used inode map when soft updates is in use
assumes that the inosused variable is signed. However, ino_t is
unsigned, so the loop invariant is incorrect and the check for
inosused wrapping to < 0 can never be true.
Instead of checking for wrap after the fact just prevent it from
happening in the first place.
PR: 218592
Submitted by: Todd Miller <todd.miller@courtesan.com>
Reviewed by: mckusick
MFC after: 1 week
The environment variable TMPDIR was copied unchecked into a fixed-size heap
buffer. Use a length-limiting snprintf in place of ordinary sprintf to
prevent the overflow. Long TMPDIR variables can still cause odd truncated
filenames, which may be undesirable.
Reported by: Coverity (CWE-120)
CIDs: 1006706, 1006707
Sponsored by: Dell EMC Isilon
When the replay window size is large than UINT8_MAX, add to the request
the SADB_X_EXT_SA_REPLAY extension header that was added in r309144.
Also add support of SADB_X_EXT_NAT_T_TYPE, SADB_X_EXT_NAT_T_SPORT,
SADB_X_EXT_NAT_T_DPORT, SADB_X_EXT_NAT_T_OAI, SADB_X_EXT_NAT_T_OAR,
SADB_X_EXT_SA_REPLAY, SADB_X_EXT_NEW_ADDRESS_SRC, SADB_X_EXT_NEW_ADDRESS_DST
extension headers to the key_debug that is used by `setkey -x`.
Modify kdebug_sockaddr() to use inet_ntop() for IP addresses formatting.
And modify kdebug_sadb_x_policy() to show policy scope and priority.
Reviewed by: gnn, Emeric Poupon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10375
- State that the units are kB.
- Be more complete/concise in terms of what is required (in this case
`minfree` must be at least `X`kB)
MFC after: 7 weeks
Sponsored by: Dell EMC Isilon
The problem is that the statfs(2) system call used to determine the relevant
mount point returns path within real root in the f_mntonname, causing
nmount(2) system call to fail with ENOENT.
Use a bit of heuristics to skip over few starting path elements when it
happens until we hit an actual mount point.
For this to work properly the whole mount should be accessible within the
chroot, it's going to still fail if chroot only has access to a part of the
mounted fs.
Reviewed by: mckusick
Approved by: mckusick
MFC after: 2 weeks
The code was calling nmount with an fstype of everything in the program
name after the last '_'. This was there to support mount_nfs being
linked to mount_oldnfs. Support for the link was removed in 2015 with
r281691.
Reviewed by: rmacklem
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10301
