Split usbd_xfer_status() check:
- Check xfer length: must be longer, than Rx descriptor size.
- Check frame size: must be shorter than xfer length.
- Discard too short frames.
Tested with WUSB54GC, STA/MONITOR modes.
The upstream change introduced a new load state, SPA_LOAD_CREATE,
and vdev_geom code needs to be aware of it.
Tested by: cy
MFC after: 1 week
X-MFC with: r305331
This adds bhnd(4) bus-level support for querying backplane interrupt vector
routing, and delegating machine/bridge-specific interrupt handling to the
concrete bhnd(4) driver implementation.
On bhndb(4) bridged PCI devices, we provide the PCI/MSI interrupt directly
to attached cores.
On MIPS devices, we report a backplane interrupt count of 0, effectively
disabling the bus-level interrupt assignment. This allows mips/broadcom
to temporarily continue using hard-coded MIPS IRQs until bhnd_mips PIC
support is implemented.
Reviewed by: mizhka
Approved by: adrian (mentor, implicit)
Broadcom Intensi-fi chipsets provided a common set of IP cores; on PCI/PCIe
devices, the USB11 host controller is left floating.
Approved by: adrian (mentor, implicit)
This patch adds driver implementation for BHND USB core. Driver has been
imported from ZRouter project with small adaptions for FreeBSD 11.
Also it's enabled for BroadCom MIPS74k boards by default. It's fully tested
on Asus boards (RT-N16: external USB, RT-N53: USB bus between SoC and WiFi
chips).
Reviewed by: adrian (mentor), ray
Approved by: adrian (mentor)
Obtained from: ZRouter
Differential Revision: https://reviews.freebsd.org/D7781
by reviving the SX control request lock and refining which lock
protects the common scratch area in "struct usb_device".
The SX control request lock was removed by r246759 because it caused a
lock order reversal with the USB enumeration lock inside
usbd_transfer_setup() as a function of r246616. It was thought that
reducing the number of locks would resolve the LOR, but because some
USB device drivers use usbd_do_request_flags() inside callback
functions, like in taskqueues, a deadlock may occur when these are
drained from device_detach(). By restoring the SX control request
lock usbd_do_request_flags() is allowed to complete its execution
when a USB device driver is detaching. By using the SX control request
lock to protect the scratch area, the LOR introduced by r246616 is
also resolved.
Bump the FreeBSD version while at it to force recompilation of all USB
kernel modules.
Found by: avos@
MFC after: 1 week
like we've done elsewhere, e.g., amd64.
As an optimization to the machine-independent layer, change the machine-
dependent pmap_ts_referenced() so that it updates the page's dirty field
if a modified bit is found while counting reference bits. This
opportunistic update can be performed at low cost and can eliminate the
need for some future calls to pmap_is_modified() by the machine-
independent layer.
MFC after: 3 weeks
survived multiple world and kernel builds, and of poudriere building full
package sets.
I have observed a 3% reduction in buildworld times with superpages enabled,
however further testing is needed to see if this is observed in other
workloads.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
warning:
sys/netinet/igmp.c:546:21: error: implicit conversion from 'int' to 'char' changes value from 148 to -108 [-Werror,-Wconstant-conversion]
p->ipopt_list[0] = IPOPT_RA; /* Router Alert Option */
~ ^~~~~~~~
sys/netinet/ip.h:153:19: note: expanded from macro 'IPOPT_RA'
#define IPOPT_RA 148 /* router alert */
^~~
This is because ipopt_list is an array of char, so IPOPT_RA is wrapped
to a negative value. It would be nice to change ipopt_list to an array
of u_char, but it changes the signature of the public struct ipoption,
so add an explicit cast to suppress the warning.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7777
sys/dev/usb/serial/uplcom.c:543:29: error: implicit conversion from 'int' to 'int8_t' (aka 'signed char') changes value from 192 to -64 [-Werror,-Wconstant-conversion]
if (uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~
sys/dev/usb/usb.h:179:53: note: expanded from macro 'UT_READ_VENDOR_DEVICE'
#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
This is because UT_READ is 0x80, so the int8_t argument is wrapped to a
negative value. Fix this by using uint8_t instead.
Reviewed by: imp, hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7776
Since negative entries are managed with a LRU list, a hit requires a
modificaton.
Currently the code tries to upgrade the global lock if needed and is
forced to retry the lookup if it fails.
Provide a dedicated lock for use when the cache is only shared-locked.
Reviewed by: kib
MFC after: 1 week
This fixes bhnd(4) nvram handling on devices that map SPROM CSRs via PCI
configuration space.
The probe method previously required that a bhnd(4) device be attached to the
parent bridge; now that the bhnd_nvram device is always attached first, this
unnecessary sanity check always failed.
Approved by: adrian (mentor, implicit)
On BCM4321 chipsets, both PCI and PCIe cores are included, with one of
the cores potentially left floating.
Since the PCI core appears first in the device table, and the PCI
profiles appear first in the resource configuration tables, this resulted in
incorrectly matching and using the PCI/v1 resource configuration on PCIe
devices, rather than the correct PCIe/v1 profile.
Approved by: adrian (mentor, implicit)
Adds support for probing and initializing bhndb(4) bridge state using
the bhnd_erom API, ensuring that full bridge configuration is available
*prior* to actually attaching and enumerating the bhnd(4) child device,
allowing us to safely allocate bus-level agent/device resources during
bhnd(4) bus enumeration.
- Add a bhnd_erom_probe() method usable by bhndb(4). This is an analogue
to the existing bhnd_erom_probe_static() method, and allows the bhndb
bridge to discover the best available erom parser class prior to newbus
probing of its children.
- Add support for supplying identification hints when probing erom
devices. This is required on early EXTIF-only chipsets, where chip
identification registers are not available.
- Migrate bhndb over to the new bhnd_erom API, using bhnd_core_info
records rather than bridged bhnd(4) device_t references to determine
the bridged chipsets' capability/bridge configuration.
- The bhndb parent (e.g. if_bwn) is now required to supply a hardware
priority table to the bridge. The default table is currently sufficient
for our supported devices.
- Drop the two-pass attach approach we used for compatibility with bhndb(4) in
the bhnd(4) bus drivers, and instead perform bus enumeration immediately,
and allocate bridged per-child bus-level resources during that enumeration.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7768
The pager getpages interface allows the caller to bound the number of
readahead and readbehind pages, and vm_fault_hold() makes use of this
feature. These bounds were ignored after r305056, causing the swap pager
to potentially page in more than the specified number of pages.
Reported and reviewed by: alc
X-MFC with: r305056
This defines a new bhnd_erom_if API, providing a common interface to device
enumeration on siba(4) and bcma(4) devices, for use both in the bhndb bridge
and SoC early boot contexts, and migrates mips/broadcom over to the new API.
This also replaces the previous adhoc device enumeration support implemented
for mips/broadcom.
Migration of bhndb to the new API will be implemented in a follow-up commit.
- Defined new bhnd_erom_if interface for bhnd(4) device enumeration, along
with bcma(4) and siba(4)-specific implementations.
- Fixed a minor bug in bhndb that logged an error when we attempted to map the
full siba(4) bus space (18000000-17FFFFFF) in the siba EROM parser.
- Reverted use of the resource's start address as the ChipCommon enum_addr in
bhnd_read_chipid(). When called from bhndb, this address is found within the
host address space, resulting in an invalid bridged enum_addr.
- Added support for falling back on standard bus_activate_resource() in
bhnd_bus_generic_activate_resource(), enabling allocation of the bhnd_erom's
bhnd_resource directly from a nexus-attached bhnd(4) device.
- Removed BHND_BUS_GET_CORE_TABLE(); it has been replaced by the erom API.
- Added support for statically initializing bhnd_erom instances, for use prior
to malloc availability. The statically allocated buffer size is verified both
at runtime, and via a compile-time assertion (see BHND_EROM_STATIC_BYTES).
- bhnd_erom classes are registered within a module via a linker set, allowing
mips/broadcom to probe available EROM parser instances without creating a
strong reference to bcma/siba-specific symbols.
- Migrated mips/broadcom to bhnd_erom_if, replacing the previous MIPS-specific
device enumeration implementation.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7748
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
sys/dev/cxgb/cxgb_sge.c:2873:44: error: implicit conversion from 'int'
to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion]
*mtod(m, char *) = CPL_ASYNC_NOTIF;
~ ^~~~~~~~~~~~~~~
This is because CPL_ASYNC_NOTIF is 0x80, so the plain char argument is
wrapped to a negative value. Fix this by using uint8_t instead.
Reviewed by: np
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7772
not page aligned. To do this, use the ld script gnu ld installs on my
system.
This is imperfect: LDFLAGS_BIN and LD_FLAGS_BIN describe different
things. The loader script could be better named and take into account
other architectures. And having two different mechanisms to do
basically the same thing needs study. However, it's blocking forward
progress on lld, so I'll work in parallel to sort these out.
Differential Revision: https://reviews.freebsd.org/D7409
Reviewed by: emaste
