objects instead of OBJT_DEFAULT objects because we never reclaim or pageout
the allocated pages. Moreover, they are mapped with pmap_qenter(), which
creates unmanaged mappings.
Reviewed by: kib
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
backend kegs so it may source compatible memory from multiple backends.
This is useful for cases such as NUMA or different layouts for the same
memory type.
- Provide a new api for adding new backend kegs to secondary zones.
- Provide a new flag for adjusting the layout of zones to stagger
allocations better across cache lines.
Sponsored by: Nokia
UMA_SLAB_KERNEL for consistency with its sibling UMA_SLAB_KMEM.
(UMA_SLAB_KMAP met its original demise in revision 1.30 of
vm/uma_core.c.) UMA_SLAB_KERNEL is now required by the jumbo frame
allocators. Without it, UMA cannot correctly return pages from the
jumbo frame zones to the VM system because it resets the pages' object
field to NULL instead of the kernel object. In more detail, the jumbo
frame zones are created with the option UMA_ZONE_REFCNT. This causes
UMA to overwrite the pages' object field with the address of the slab.
However, when UMA wants to release these pages, it doesn't know how to
restore the object field, so it sets it to NULL. This change teaches
UMA how to reset the object field to the kernel object.
Crashes reported by: kris
Fix tested by: kris
Fix discussed with: jeff
MFC after: 6 weeks
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
boot by MD code to indicated detected alignment preference. Rather than
cache alignment being encoded in UMA consumers by defining a global
alignment value of (16 - 1) in UMA_ALIGN_CACHE, UMA_ALIGN_CACHE is now
a special value (-1) that causes UMA to look at registered alignment. If
no preferred alignment has been selected by MD code, a default alignment
of (16 - 1) will be used.
Currently, no hardware platforms specify alignment; architecture
maintainers will need to modify MD startup code to specify an alignment
if desired. This must occur before initialization of UMA so that all UMA
zones pick up the requested alignment.
Reviewed by: jeff, alc
Submitted by: attilio
zone. Cluster allocations fail when this happens. Also processes that may have
blocked on cluster allocations will never be woken up. Thanks to rwatson for
an overview of the issue and pointers to the mbuma paper and his tool to dump
out UMA zones.
Reviewed by: andre@
maxpages on a zone is woken up, with the rest never being woken up as
a result of the ZFLAG_FULL flag being cleared. Wakeup all such blocked
procsses instead. This change introduces a thundering herd, but since
this should be relatively infrequent, optimizing this (by introducing
a count of blocked processes, for example) may be premature.
Reviewd by: ups@
allocations were made using improper flags in interrupt context.
Replace with a simple WITNESS warning call. This restores the
invariant that M_WAITOK allocations will always succeed or die
horribly trying, which is relied on by many UMA consumers.
MFC after: 3 weeks
Discussed with: jhb
- Add a printf in swp_pager_meta_build() to warn if the swapzone becomes
exhausted so that there's at least a warning before a box that runs out
of swapzone space before running out of swap space deadlocks.
MFC after: 1 week
Reviwed by: alc
libmemstat(3) is used by vmstat (and friends) to produce more accurate
and more detailed statistics information in a machine-readable way,
and vmstat continues to provide the same text-based front-end.
This change should not be MFC'd.
report this as an allocation failure for the item type. The failure
will be separately recorded with the bucket type. This my eliminate
high mbuf allocation failure counts under some circumstances, which
can be alarming in appearance, but not actually a problem in
practice.
MFC after: 2 weeks
Reported by: ps, Peter J. Blok <pblok at bsd4all dot org>,
OxY <oxy at field dot hu>,
Gabor MICSKO <gmicskoa at szintezis dot hu>
The difference between WITNESS_CHECK() and WITNESS_WARN() is that
WITNESS_CHECK() should be used in the places that the return value of
witness_warn() is checked, whereas WITNESS_WARN() should be used in places
where the return value is ignored. Specifically, in a kernel without
WITNESS enabled, WITNESS_WARN() evaluates to an empty string where as
WITNESS_CHECK evaluates to 0. I also updated the one place that was
checking the return value of WITNESS_WARN() to use WITNESS_CHECK.
UMA boot pages.
Disable recursion on the general UMA lock now that startup_alloc() no
longer uses it.
Eliminate the variable uma_boot_free. It serves no purpose.
Note: This change eliminates a lock-order reversal between a system
map mutex and the UMA lock. See
http://sources.zabbadoz.net/freebsd/lor.html#109 for details.
MFC after: 3 days
monitoring API, which might or might not be the same as the internal
maximum (currently none).
Export flag information on UMA zones -- in particular, whether or
not this is a secondary zone, and so the keg free count should be
considered in that light.
MFC after: 1 day
- Add a new uma_zfree_internal() flag, ZFREE_STATFREE, which causes it to
to update the zone's uz_frees statistic. Previously, the statistic was
updated unconditionally.
- Use the flag in situations where a "real" free occurs: i.e., one where
the caller is freeing an allocated item, to be differentiated from
situations where uma_zfree_internal() is used to tear down the item
during slab teardown in order to invoke its fini() method. Also use
the flag when UMA is freeing its internal objects.
- When exchanging a bucket with the zone from the per-CPU cache when
freeing an item, flush cache statistics back to the zone (since the
zone lock and critical section are both held) to match the allocation
case.
MFC after: 3 days
per-CPU cache statistics. UMA sizes the cache array based on the
number of CPUs at boot (mp_maxid + 1), and iterating based on MAXCPU
could read off the end of the array (into the next zone).
Reported by: yongari
MFC after: 1 week
it covers the following of the uc_alloc/freebucket cache pointers.
Originally, I felt that the race wasn't helped by holding the mutex,
hence a comment in the code and not holding it across the cache access.
However, it does improve consistency, as while it doesn't prevent
bucket exchange, it does prevent bucket pointer invalidation. So a
race in gathering cache free space statistics still can occur, but not
one that follows an invalid bucket pointer, if the mutex is held.
Submitted by: yongari
MFC after: 1 week
statistics via a binary structure stream:
- Add structure 'uma_stream_header', which defines a stream version,
definition of MAXCPUs used in the stream, and the number of zone
records in the stream.
- Add structure 'uma_type_header', which defines the name, alignment,
size, resource allocation limits, current pages allocated, preferred
bucket size, and central zone + keg statistics.
- Add structure 'uma_percpu_stat', which, for each per-CPU cache,
includes the number of allocations and frees, as well as the number
of free items in the cache.
- When the sysctl is queried, return a stream header, followed by a
series of type descriptions, each consisting of a type header
followed by a series of MAXCPUs uma_percpu_stat structures holding
per-CPU allocation information. Typical values of MAXCPU will be
1 (UP compiled kernel) and 16 (SMP compiled kernel).
This query mechanism allows user space monitoring tools to extract
memory allocation statistics in a machine-readable form, and to do so
at a per-CPU granularity, allowing monitoring of allocation patterns
across CPUs in order to better understand the distribution of work and
memory flow over multiple CPUs.
While here, also export the number of UMA zones as a sysctl
vm.uma_count, in order to assist in sizing user swpace buffers to
receive the stream.
A follow-up commit of libmemstat(3), a library to monitor kernel memory
allocation, will occur in the next few days. This change directly
supports converting netstat(1)'s "-mb" mode to using UMA-sourced stats
rather than separately maintained mbuf allocator statistics.
MFC after: 1 week
zone whenever it was moving buckets between the zone and the cache,
or when coalescing statistics across the CPU. Remove flushing of
statistics to the zone when coalescing statistics as part of sysctl,
as we won't be running on the right CPU to write to the cache
statistics.
Add a missed gathering of statistics: when uma_zalloc_internal()
does a special case allocation of a single item, make sure to update
the zone statistics to represent this. Previously this case wasn't
accounted for in user-visible statistics.
MFC after: 1 week
mutexes, which offers lower overhead on both UP and SMP. When allocating
from or freeing to the per-cpu cache, without INVARIANTS enabled, we now
no longer perform any mutex operations, which offers a 1%-3% performance
improvement in a variety of micro-benchmarks. We rely on critical
sections to prevent (a) preemption resulting in reentrant access to UMA on
a single CPU, and (b) migration of the thread during access. In the event
we need to go back to the zone for a new bucket, we release the critical
section to acquire the global zone mutex, and must re-acquire the critical
section and re-evaluate which cache we are accessing in case migration has
occured, or circumstances have changed in the current cache.
Per-CPU cache statistics are now gathered lock-free by the sysctl, which
can result in small races in statistics reporting for caches.
Reviewed by: bmilekic, jeff (somewhat)
Tested by: rwatson, kris, gnn, scottl, mike at sentex dot net, others
statement from some files, so re-add it for the moment, until the
related legalese is sorted out. This change affects:
sys/kern/kern_mbuf.c
sys/vm/memguard.c
sys/vm/memguard.h
sys/vm/uma.h
sys/vm/uma_core.c
sys/vm/uma_dbg.c
sys/vm/uma_dbg.h
sys/vm/uma_int.h
UMA_ZONE_REFCNT and UMA_ZONE_MALLOC zones, as the page(s) undoubtedly
came from kmem_map for those two. Previously it would set it back
to NULL for UMA_ZONE_REFCNT zones and although this was probably not
fatal, it added MORE code for no reason.
recursion from the VM is handled (and the calling code that allocates
buckets knows how to deal with it), we do not want to prevent allocation
from the slab header zones (slabzone and slabrefzone) if uk_recurse is
not zero for them. The reason is that it could lead to NULL being
returned for the slab header allocations even in the M_WAITOK
case, and the caller can't handle that (this is also explained in a
comment with this commit).
The problem analysis is documented in our mailing lists:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=153445+0+archive/2004/freebsd-current/20041231.freebsd-current
(see entire thread for proper context).
Crash dump data provided by: Peter Holm <peter@holm.cc>
number of entries into bucket_zone_lookup(), which helps make more
clear the logic of consumers of bucket zones.
Annotate the behavior of bucket_init() with a comment indicating
how the various data structures, including the bucket lookup tables,
are initialized.
IF INVARIANTS is defined, and in the rare case that we have
allocated some objects from the slab and at least one initializer
on at least one of those objects failed, and we need to fail the
allocation and push the uninitialized items back into the slab
caches -- in that scenario, we would fail to [re]set the
bucket cache's ub_bucket item references to NULL, which would
eventually trigger a KASSERT.
