platforms.
While here, work around a strange quirk in config(8) that I do not yet
understand. Rearrange which atapi* files have 'optional' vs. 'count'
so that you can have atapifd without atapicd. The only difference should
be that this works instead of having a link error because atapi-all.o got
left out of the kernel.
Basically, the reason most people haven't seen this is
most likely related to the low usage of MCHTYPE.
Pointed out and suggested a fix by: Boris Popov (bp) - thanks!
Taking over the sector following the MBR causes problems on some
machines, and the actual gains are fairly small in terms of how
the space is presently used.
Since we need a number of further features (eg. handling extended
partitions) that can't be readily accommodated in the basic boot0
design anyway, rather choose to implement the additional stuff
separately and concentrate on compatibility rather than features
here.
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from: NetBSD/pc98
Replace shared lock on vnode with exclusive one. It shouldn't impact
perfomance as NCP protocol doesn't support outstanding requests.
Do not hold simple lock on vnode for long period of time.
Add functionality to the nwfs_print() routine.
OsdSleepUsec(), SleepOp corresponds to OsdSleep() by reading ACPICA
source code.
- Add OsdSleepUsec() which uses DELAY() simply.
- Change unit of acpi_sleep() argument; microseconds to milliseconds.
drivers (again). These drivers have not compiled for 5-6 months.
Now that the new sound code supports MIDI, the major reason we had for
reviving it is gone. It is a far better investment polishing the new
midi code than trying to keep this on life support. Come 5.0-REL, if
there are major shortcomings in the pcm sound driver then maybe we can
rethink this, but until then we should focus on pcm.
Remember, these have not been compilable since ~April-May this year.
- If resource which was allocated for pcic was
requested via this ioctl, bus_alloc_resource
would be succeeded and that resource was
returned as free resource. So check whether
requested resource was used for pcic or not
before bus_alloc_resource test.
- merge SYS_RES_IRQ routine into other SYS_RES_*
routine and clean up.
problem reported by: Yohei Terada <terada@jiro.c.u-tokyo.ac.jp>
device_add_child() is meant to be called by the bus add_child method, not
to replace the bus add_child method. We could have called nexus_add_device
directly too, that would have also worked.
PR: 21657
Tested by: markm
that it's enabled in acpireg.h only if DIAGNOSTIC option is specified.
ACPICA OSD functions will be compiled in machine/acpi_machdep.c again
tentatively (if DIAGNOSTIC option is specified).
# Should we have acpica_osd.c ?
avoid power on again problem after acpi_soft_off() calling.
- Implement SleepOp/StallOp in AML interpreter. Also provide ACPICA
compatibility.
- Minor changes on __inline function declaration in acpica_osd.h
(obtained from NetBSD porting).
- Move all register I/O into acpi_io.c
- Move event handling into acpi_event.c
- Reorganise headers into acpivar/acpireg/acpiio
- Move find-RSDT and find-ACPI-owned-memory into acpi_machdep
- Allocate all resources (except those detailed only by AML)
as real resources. Add infrastructure that will make adding
resource support to AML code easy.
- Remove all ACPI #ifdefs in non-ACPI code
- Removed unnecessary includes
- Minor style and commenting fixes
Reviewed by: iwasaki
to accomodate the changes.
Here's a list of things that have changed (I may have left out a few); for a
relatively complete list, see http://people.freebsd.org/~bmilekic/mtx_journal
* Remove old (once useful) mcluster code for MCLBYTES > PAGE_SIZE which
nobody uses anymore. It was great while it lasted, but now we're moving
onto bigger and better things (Approved by: wollman).
* Practically re-wrote the allocation macros in sys/sys/mbuf.h to accomodate
new allocations which grab the necessary lock.
* Make sure that necessary mbstat variables are manipulated with
corresponding atomic() routines.
* Changed the "wait" routines, cleaned it up, made one routine that does
the job.
* Generalized MWAKEUP() macro. Got rid of m_retry and m_retryhdr, as they
are now included in the generalized "wait" routines.
* Sleep routines now use msleep().
* Free lists have locks.
* etc... probably other stuff I'm missing...
Things to look out for and work on later:
* find a better way to (dynamically) adjust EXT_COUNTERS
* move necessity to recurse on a lock from drain routines by providing
lock-free lower-level version of MFREE() (and possibly m_free()?).
* checkout include of mutex.h in sys/sys/mbuf.h - probably violating
general philosophy here.
The code has been reviewed quite a bit, but problems may arise... please,
don't panic! Send me Emails: bmilekic@freebsd.org
Reviewed by: jlemon, cp, alfred, others?
not work on any real hardware (or fully work on any simulator). Much more
needs to happen before this is actually functional but its nice to see
the FreeBSD copyright message appear in the ia64 simulator.
matching methods so that we can run the same driver on both NEWCARD
and OLDCARD. Also set the device description to the card that we
found, if any.
The sn driver should be ready when the NEWCARD catches up. There's a
config activation issue as well as a kernel thread issue to resolve
first.
i386/isa/pcibus.c. This gets -current running again on multiple host->pci
machines after the most recent nexus commits. I had discussed this with
Mike Smith, but ended up doing it slightly differently to what we
discussed as it turned out cleaner this way. Mike was suggesting creating
a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(),
but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform
property, not a quirk of a given implementation. This does use the ivar
methods but does so properly. It also now prints the physical pci bus that
a host->pci bridge (pcib) corresponds to.
default.
Fix the identify/probe/attach cycle somewhat. Now in acpi_identify we
parse enough of the RSDT/FACP to find the communications port and
interrupt so that we can establish these as resources on the acpi device.
Pass the softc to acpi_queue_event so that it doesn't dereference NULL
when acpi_intr is invoked in the attach routine (because devclass_get_softc
isn't going to work yet).
Account for our allocated resources properly so that we can free them
if required.
- Add acpi_gpe_enable_bit() to manipulate GPE enable registers based
on _PRW objects.
- Add acpi_set_device_wakecap(). This will manipulate related
PowerResource objects and execute _PSW method of the device.
- Cleanup and some small fixes.
This code was implemented based on 7.2.1 _PRW in spec mainly.
performed twice. Eliminate initialization that is already performed
by _aio_aqueue.
aio_physwakeup: Eliminate redundant synchronization that is already
performed by bufdone.
sifficient. But somewhere (I believe in the UDP stuff), someone is
overwriting an mbuf without calling m_pullup() first. This results in
broad- and multi-cast traffic that is passed through the bridge getting
corrupted.
This should be backed out when there is some assurance that the upper
layers (and I suppose all of the device drivers) are fixed.
Suggested by: archie
Add correct support for v_object management, so mmap() operation should
work properly.
Add support for extattrctl() routine (submitted by semenu).
At this point nullfs can be considered as functional and much more stable.
In fact, it should behave as a "hard" "symlink" to underlying filesystem.
Reviewed in general by: mckusick, dillon
Parts of logic obtained from: NetBSD
separately (nfs, cd9660 etc) or keept as a first element of structure
referenced by v_data pointer(ffs). Such organization leads to known problems
with stacked filesystems.
From this point vop_no*lock*() functions maintain only interlock lock.
vop_std*lock*() functions maintain built-in v_lock structure using lockmgr().
vop_sharedlock() is compatible with vop_stdunlock(), but maintains a shared
lock on vnode.
If filesystem wishes to export lockmgr compatible lock, it can put an address
of this lock to v_vnlock field. This indicates that the upper filesystem
can take advantage of it and use single lock structure for entire (or part)
of stack of vnodes. This field shouldn't be examined or modified by VFS code
except for initialization purposes.
Reviewed in general by: mckusick
pointer, when bridging and bridge_ipfw are enabled, and when bdg_forward()
happens to free the packet and make our pointer NULL. There may be
more similar problems like this one with calls to bdg_forward().
PR: Related to kern/19551
Reviewed by: jlemon
of the code in the kernel properly checks for read-onlyness before
writing into an mbuf data area. When that code is fixed, the m_dup()
can go back to being m_copypacket().
Requested by: nsayer
vn_extattr_get() and vn_extattr_set(). vn_extattr_rm() removes the
specified extended attribute from a vnode, authorizing the change as
the kernel (NULL cred).
Obtained from: TrustedBSD Project
Add support for constructing a table of critical section regions in
the firmware image. The kernel driver will soon have support for
single stepping the sequencer outside of a critical region prior
to starting exception handling.
ahc_pci.c:
Bring back the AHC_ALLOW_MEMIO option at least until the
memory mapped I/O problem on the SuperMicro 370DR3 is
better understood.
aic7xxx.c:
If we see a spurious SCSI interrupt, attempt to clear it and
continue by unpausing the sequencer.
Change the interface to ahc_send_async(). Some async messages
need to be broadcast to all the luns of a target or all the
targets of a bus. This is easier to achieve by passing explicit
channel, target, and lun parameters instead of attempting to
construct a device info struct to match.
Filter the sync parameters for the PPR message in exactly the
same way we do for an old fashioned SDTR message.
Correct some typos and correct a panic message.
Handle rejected PPR messages.
In ahc_handle_msg_reject(), let ahc_build_transfer_msg() build
any additional transfer messages instead of doing this inline.
aic7xxx.h:
Increase the size of both msgout_buf and msgin_buf to
better accomodate PPR messages.
aic7xxx_freebsd.c:
Update for change in ahc_send_async() parameters.
aic7xxx_freebsd.h
Update for change in ahc_send_async() parameters.
Honor AHC_ALLOW_MEMIO.
aic7xxx_pci.c:
Check the error register before going into full blown PCI
interrupt handling. This avoids a few costly PCI configuration
space reads when we run our PCI interrupt handler because another
device sharing our interrupt line is more active than we are.
Also unpause the sequencer after processing a PCI interrupt.
sequencer files. Different platforms place the included files in different
locations and it is easier to modify the include path passed as arguments
to the assembler than adding #ifdef support to the assembler.
Remove a spurious 'nop' instruction.
sequencer files. Different platforms place the included files in different
locations and it is easier to modify the include path passed as arguments
to the assembler than adding #ifdef support to the assembler.
attached by the pnaphy driver. This seems to work fine with my sample
ADMtek adapter (which has both 10/100 ethernet and homePNA connectors
and hardware).
* Add lots of comments
* Convert a couple of assertions to KASSERT()
* Minimal whitespace & misapplied {} fixes
* Convert #if 0 to #if COMPILING_LINT for code we presently do not
support, but want to keep available.
Reviewed by: adrian, markm
with #ifndef __alpha__/#endif
- Add function prototypes for functions used during the alpha console
probe and gdb port setup inside of #ifdef __alpha__/#endif.
a result of mii_phy_probe()) and use that rather than hardcoding a
constant. The hardcoded way was too specific to the particular card
I had and caused PHY probing to fail on at least one laptop with a
built-in AMD chip.
Reported by: rjk@grauel.com (Richard J Kuhns)
pcmciavar.h 1.9->1.12
1.12, enami, minor coding nits
1.11, augustss, (pcmcia_devinfo NRFB)
1.10, cgd, add generic lookup routines
pcmcia.c 1.14->1.23
1.23, drochner, (probe code printing, NRFB)
1.22, augustss, KNF
1.21, uch, (hpcmips tweaks NRFB)
1.20, chopps, remove bogus debug
1.19, enami, minor coding nits
1.18, augustss, (pcmcia_devinfo NRFB)
1.17, nathanw, LP64 printf fixes
1.16, cgd, add generic lookup routines
1.15, aymeric, printf fixes
NRFB == not relevant to freebsd
o Expand the pccard matching routines to include the ability to match
against the CIS strings since our current driver database is based on
that.
o Add lots more ivars to get the information necessary to snag these values.
must be held when retrieving ACLs from vnodes. This is required for
EA-based UFS ACL implementations.
o Update vacl_get_acl() so that it does appropriate vnode locking.
o Remove static from M_ACL malloc define so that it is accessible for
consumers of ACLs other than in kern_acl.c
Obtained from: TrustedBSD Project
Also remove unneeded includes in aml_obj.c and aml_parse.c.
This new function takes 'struct aml_name *' as a argument rather than
'char *' where aml_invoke_method_by_name() does. It's worth to have
these two interfaces in many cases.
o Add Vpp power at 5.0V rather than 0. Setting it to zero violates
the pccard spec. Most pcic devices in use today don't let us
violate the spec, but some older ones do. Bill Paul sent this to
me a long time ago and I thought I'd commit it before now.
o Add some debug stuff hidden behind bootverbose.
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
ahc->unit is depricated and will be going away as soon as the Linux
driver catches up. In the FreeBSD case, it is always initialized to 0
and this caused some strangeness in registering multiple ahc controllers
with CAM.
Noticed by: Tor.Egge@fast.no
Wakeup event is generated by power button and/or sleep button on some
laptops but this also generates SCI interrupt, and shutdown the system
as result. So this kind of mechanism is introduced so that acpi
driver ignore given events for certain period.
of AML interpreter.
- Delete and cleanup a lot of almost duplicated code in kernel/userland.
- Add new common functions for kernel/userland code.
aml_adjust_readvalue(), aml_adjust_updatevalue(),
aml_region_handle_alloc(), aml_region_handle_free() and
aml_region_io().
- Add primitive functions for both versions of kernel/userland in order to
have shared code as much as possible.
aml_region_read_simple(), aml_region_write_simple(),
aml_region_prompt_read(), aml_region_prompt_write() and
aml_region_prompt_update_value().
- Consider update rule and access type in field flags. Also add a lot of
definitions for the flags.
- Fix bugs on bit manipulation for read/write operations.
- Fix bugs on IndexField I/O part. Also add workaround for temporary
object corruption during StoreOp interpretation.
IBM's DPTA and DTLA series of drives (no other disk vendors are known
to support this) on non-Promise controllers (promise controllers lockup
when given the tagged queuing specific commands).
It gives especially master/slave comboes about 5% better performance.
Add support for the Promise ATA100 OEM chip (pdc20265)
Add support for the Cyrix 5530
Change the way status is read from the drives, use the alternate
status reg when possible.
Better support for DEVFS, the acdXtY devices are now created when needed.
Lots of little cleanups.
which hides the 'hole' in the minor bits.
Introduce unit2minor() to do the reverse operation.
Fix some some make_dev() calls which didn't use UID_* or GID_* macros.
Kill the v_hashchain alias macro, it hides the real relationship.
Introduce experimental SI_CHEAPCLONE flag set it on cloned bpfs.
possible to have different probe/attach semantics between the two
systems and yet still use the same driver for both.
Compatibility methods for OLDCARD drivers. We use these routines to make
it possible to call the OLDCARD driver's probe routine in the context that
it expects. For OLDCARD these are implemented as pass throughs to the
device_{probe,attach} routines. For NEWCARD they are implemented such
such that probe becomes strictly a matching routine and attach does both
the old probe and old attach.
compat devices should use the following:
/* Device interface */
DEVMETHOD(device_probe), pccard_compat_probe),
DEVMETHOD(device_attach), pccard_compat_attach),
/* Card interface */
DEVMETHOD(card_compat_match, foo_match), /* newly written */
DEVMETHOD(card_compat_probe, foo_probe), /* old probe */
DEVMETHOD(card_compat_attach, foo_attach), /* old attach */
This will allow a single driver binary image to be used for both
OLDCARD and NEWCARD.
Drivers wishing to not retain OLDCARD compatibility needn't do this.
ep driver minorly updated.
sn driver updated more than minorly. Add module dependencies to allow
module to load. Also change name to if_sn. Add some debugging code.
attempt to fix the cannot allocate memory problem I'd been seeing.
Minor formatting nits.
on directories.
o Allow privileged processes in jail() to create inodes with the
setgid bit set even if they are not a member of the group denoted
by the file creation gid. This occurs due to inherited gid's from
parent directories on file creation, allowing a user to create a
file with a gid that is not in the creating process's credentials.
Obtained from: TrustedBSD Project
and UFS file flags. Here's what the comment says, for reference:
Privileged processes in jail() are permitted to modify
arbitrary user flags on files, but are not permitted
to modify system flags.
In other words, privilege does allow a process in jail to modify user
flags for objects that the process does not own, but privilege will
not permit the setting of system flags on the file.
Obtained from: TrustedBSD Project
remove the setuid/setgid bits by virtue of a change to a file with those
bits set, even if the process doesn't own the file, or isn't a group
member of the file's gid.
Obtained from: TrustedBSD Project
safe as suser() no longer sets ASU.
o Note that in some cases, the PRISON_ROOT flag is used even though no
process structure is passed, to indicate that if a process structure
(and hence jail) was available, it would be ok. In the long run,
the jail identifier should probably be moved to ucred, as the uidinfo
information was.
o Some uid 0 checks remain relating to the quota code, which I'll leave
for another day.
Reviewed by: phk, eivind
Obtained from: TrustedBSD Project
other schedsoft*() functions since they have never been used.
Removed confused comment about not needing these functions. The
functions delay scheduling of SWIs until the next hardclock tick.
For devices that only deliver a few characters per interrupt, this
reduces the number of calls to the scheduler by a large factor (about
115 for each sio port at 115200 bps).
the 128-bit sigset_t changes by moving conditionally (rarely) executed
code to the beginning where it is always executed, and since this code
now involves 3 128-bit operations, the pessimization was relatively
large. This change speeds up lmbench's pipe latency benchmark by
3.5%.
Fixed style bugs in CURSIG().
very bloated, first with 128-bit sigset_t's, then with locking in the
SMP case, then with locking in all cases. The space bloat was probably
also time bloat, partly because the fast path through CURSIG() was
pessimized by the sigset_t changes. This change speeds up lmbench's
pipe-based latency benchmark by 4% on a Celeron. <sys/signalvar.h>
had become very polluted to support the bloat.
in favor of the new-style per-vif socket.
this does not affect the behavior of the ISI rsvpd but allows
another rsvp implementation (e.g., KOM rsvp) to take advantage
of the new style for particular sockets while using the old style
for others.
in the future, rsvp supporn should be replaced by more generic
router-alert support.
PR: kern/20984
Submitted by: Martin Karsten <Martin.Karsten@KOM.tu-darmstadt.de>
Reviewed by: kjc
is enabling as all entries are still called with Giant being held.
Maintaining compatability with NetBSD makes what should be very simple
kinda ugly.
Reviewed by: Jason Evans
filesystem lookup() routine if it unlocks parent directory. This flag should
be carefully tracked by filesystems if they want to work properly with nullfs
and other stacked filesystems.
VFS takes advantage of this flag to perform symantically correct usage
of vrele() instead of vput() if parent directory already unlocked.
If filesystem fails to track this flag then previous codepath in VFS left
unchanged.
Convert UFS code to set PDIRUNLOCK flag if necessary. Other filesystmes will
be changed after some period of testing.
Reviewed in general by: mckusick, dillon, adrian
Obtained from: NetBSD
